PART |
Description |
Maker |
U208 U208B |
Open Loop Phase Control Circuit
|
TEMIC[TEMIC Semiconductors]
|
ADM6315 |
Open-Drain Microprocessor Supervisory Circuit in 4-Lead SOT-143
|
Analog Devices, Inc. AD[Analog Devices]
|
5962R9663401VEC |
Open-Drain SOT µP Reset Circuit 简型锁
|
Intersil, Corp.
|
LT4256-3IGNPBF LT4256-3IGNTR LT4256-3IGNTRPBF |
Positive High Voltage Hot Swap Controller with Open-Circuit Detect
|
Linear Technology
|
LT4254 LT4254CGN LT4254IGN |
Positive High Voltage Hot Swap Controller with Open-Circuit Detect
|
LINER[Linear Technology]
|
MAX6315US31D2 MAX6315US31D3-T MAX6315US31D2-T MAX6 |
Open-Drain SOT μP Reset Circuit Open-Drain SOT μP Reset Circuit
|
Maxim Integrated Produc...
|
PE5SC2001 |
3.5mm Male General Purpose Calibration Kit Component Open Circuit Operating From DC to 26.5 GHz
|
Pasternack Enterprises,...
|
ADM6316CY46ARJ-RL7 ADM6318CY46ARJ-RL7 ADM6320CY46A |
Supervisory Circuit with Watchdog Manual Reset and Active-Low Push-Pull Reset Output Supervisory Circuit with Watchdog Manual Reset and Active-Low Open-Drain Reset Output Supervisory Circuit with Watchdog and Dual Active-Low Open-Drain/Active-High Push-Pull Reset Outputs Supervisory Circuit with Manual Reset and Dual Active-Low/Active-High Push-Pull Reset Outputs
|
Analog Devices
|
HI-8422-14 |
16-Channel Discrete-to-Digital Interface Sensing 28 Volt / Open and Open / Ground Signals
|
Holt Integrated Circuit...
|
HI-8422PQT HI-8422 HI-8422PQI |
16-Channel Discrete-to-Digital Interface Sensing 28 Volt / Open and Open / Ground Signals
|
HOLTIC[Holt Integrated Circuits]
|
MCP130T-485HI MCP130T-485GI MCP120 MCP130T-315DI M |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBCY3 The MCP130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP120 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP120 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d (MCP120 / MCP130) Microcontroller Supervisory Circuit with Open Drain Output CAP 120UF 450V ELECT TS-HB Microcontroller Supervisory Circuit with Open Drain Output 微控制器监控电路的开漏输 Microcontroller Supervisory Circuit with Open Drain Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|
TC7PA05FU |
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic Dual Inverter (open drain) with 3.6 V Tolerant Input and Output
|
TOSHIBA[Toshiba Semiconductor]
|