carlingswitch,inc. (860) 793-9281? carlingswitch, ltd. int + 44 1392-364422 ? carlingswitch asia-pacific, ltd. int + 852-2737-2 277 28 v 70 0 1- v - b b- rsc a rsc-series rocker switches dimensional specifications: in. [mm] specifications ?certifications*: ul, csa, vde ?dielectric strength: 1,000 v (minimum) ?insulation resistance: 100 megohms (minimum) ?base material: nylon ?actuator material: polyester or nylon * due to ongoing technological advances, consult factory for certification specifics. the rsc-series super curvette single pole rocker switches are physically similar to the curvette series. these switches offer higher electrical ratings with up to 125 amp peak inrush capability. series rsc single pole circuit a off-none-on b on-none-on rating 60 15a 250vac 20a 125vac 3/4hp 125-250vac 6(6)a 250vac 50e3 t85 61 15a 250 vac 20a 125vac 6(6)a 250vac 50e3 t85 70 15a 250vac 20a 125vac 3/4hp 125-250vac 16(6)a 250vac t85 71 15a 250vac 20a 125vac 16(6)a 250vac t85 base color 1 b black w white termination 0 solder lug 1 .250tab (qc) actuator style r rocker v two color visi-rocker actuator color 1 b black w white color of molded-in legend and/or visi-rocker end 1 n not applicable b black v visi-red w white rocker face legend ink transfer molded-in 2 stamp 3 0 no legend 0 1 off-on (vertical) a 2 off-on (horizontal) b 8 o-i (horizontal) d 9 o-i (vertical) e on-off (vertical) f on-off (horizontal) g off o-i on (vertical) h - .480[12.19] .375[9.52] 1.072[27.23] test cut hole in actual material .125[3.18] x .150[3.81] .187[4.75] solder lug .080[2.03] .725[18.41] 1.125[28.58] .620[15.75] .375[9.53] .187[4.75] mounting hole panel thickness: .025 min. - .187 max. specific cutout dimension range dependent on panel thickness and material. consult factory. terminal type .550[13.97] .250[6.35] .250 tab (q.c.) 1.070[27.17] notes: shading indicates standard configurations. panel cut-out recommendations: for sheet metal panels, switch must enter panel in same direction as the punch. (burr on bottom. ) test cut hole in actual material. 1 matte finish is standard. custom colors are available. consult factory. 2 molded-in legend available only with visi-rocker option. 3 white is standard with dark actuators; black is standard with light actuators.
|
