1 1310nm emitting,1550nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module c-13/15-fxx-xx-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds515-jan0906 rev. a.2 luminentoic.com parameter symbol min typical max unit test condition laser diode optical output power l m h 0.2 0.5 1 0.35 0.75 1.6 0.5 1 - mw cw, i th + 20ma , kink free peak wavelength 1290 1310 1330 nm cw, p f =p f (min) spectrum width (rms) ? - - 3 nm cw, p f =p f (min) threshold current i th - 10 15 ma cw forward voltage v f - 1.2 1.5 v cw, p f =p f (min) rise/fall time t r/ t f - - 0.3 ns i bias=ith ,10% to 90% monitor diode monitor current i m 100 - - a cw, p f =p f (min),v rpd =2v dark current i dark - - 0.1 a v rpd =5v capacitance c t - 6 15 p f v rpd =5v, f=1mhz module tracking error ? p f /p f -1.5 - 1.5 db apc, -40 to +85oc optical crosstalk crt < -45 db optical and electrical characteristics( tc=25oc) features ? single ? ber bi-directional operation ? laser diode with multi-quantum- well structure ? low threshold current ? ingaas/inp pin photodiode with trans-impedance ampli? er ? high sensitivity with agc* ? differential ended output ? single +3.3v power supply ? integrated wdm coupler ? un-cooled operation from -40oc to +85oc ? hermetically sealed active component ? single mode ? ber pigtailed packaging with optional fc/st/sc/mu connector ? lc/sc bosa ? design for ? ber optic networks application ? rohs compliant available parameter symbol value unit fiber output power l/m/h p f 1(l)/1.5(m)/2.5(h) mw ld reverse voltage v rld 2 v pin-tia voltage v cc 4.5 v operating temperature t opr -40 to +85 oc storage temperature t stg -40 to +85 oc absolute maximum rating (tc=25oc) (all optical data refer to a coupled 9/125m single-mode ? ber) note: 1.pin assignment can be customized. 2.speci? cations subject to change without notice.
2 1310nm emitting,1550nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module c-13/15-fxx-xx-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds515-jan0906 rev. a.2 luminentoic.com parameter symbol min typical max unit test condition power supply v cc 3.0 3.3 3.6 v f02 - - 1000 differential output voltage v d f04 - 260 450 mv f06 185 250 415 f02 - - 35 supply current (no load) i cc f04 - 21 30 ma f06 - 26 50 dc electrical characteristics( tc=25oc) detector =1480-1600nm parameter symbol min typical max unit test condition detection range 1480 1550 1600 nm - f02 52 - 70 measure differentially, ac coupled, rl=50 gain @ 10 mbps differential g f04 6 7 - v/mw measure differentially, ac coupled, rl=50 f06 1.92 2.5 3.4 measure differentially with 30ua p-p singnal f02 120 140 - bandwidth bw f04 404 470 - mhz f06 700 920 1100 f02 -3 0 - ber<10 -10 @155mbps prbs 2 23 -1,er=10db saturation power psat f04 -7 -6 - dbm ber<10 -10 @622mbps prbs 2 23 -1,er=10db f06 -3 - - ber<10 -12 @1.25gbps prbs 2 7 -1,er=10db f02 - -38 -35 ber<10 -10 @155mbps prbs 2 23 -1,er=10db sensitivity sens. f04 - -33 -30 dbm ber<10 -10 @622mbps prbs 2 23 -1,er=10db f06 - -26 -23 ber<10 -12 @1.25gbps prbs 2 7 -1,er=10db f02 - 50 - output resistance rout f04 48 50 52 ohm f06 48 50 62 ac/optical and electrical characteristics( tc=25oc)
3 1310nm emitting,1550nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module c-13/15-fxx-xx-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds515-jan0906 rev. a.2 luminentoic.com pin assignment outline demensions units in mm. a type pin 2 : laser anode and case gnd pin 3 : monitor diode anode pin 1 : laser cathode pin 4 : monitor diode cathode pin 4 : monitor diode anode pin 1 : laser anode and monitor diode cathode ld pin assignment pin 3 : laser cathode pin 2 : case gnd pin-tia pin assignment functional schematic d type part number: c-13/15-fxx-bx-slcx-xx pin-tia ld front view left side view top view dimension: a:6.7~7.3 mm (low & middle power) a:9.0~9.6 mm (high power)
4 1310nm emitting,1550nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module c-13/15-fxx-xx-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds515-jan0906 rev. a.2 luminentoic.com outline dimensions units in mm. part number: c-13/15-fxx-bx-sscx-xx outline dimensions units in mm. part number: c-13/15-fxx-px-sxxx/xxx-xx a a:9.3~9.9 mm (high power) dimension: a:7.2~7.8 mm (low & middle power) top view front view left side view pin-tia ld top view pc (sr=20) fc:fc/pc pin-tia ld front view dimension: a:7.0~7.6 mm (low & middle power) a:9.3~9.9 mm (high power) left side view
handling precautions: this device is susceptible to damage as a result of electrostatic discharge (esd). a static free environment is highly recommended. follow guidelines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerous to human eyes. avoid eye exposure to direct or indirect radiation. 5 1310nm emitting ,1550nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module c-13/15-fxx-xx-sxxx/xxx-xx important notice! all information contained in this document is subject to change without notice, at luminentoics sole and absolute discretion. luminentoic warrants performance of its products to current specifications only in accordance with the companys standard one-year warranty; however, specifications designated as preliminary are given to describe components only, and luminentoic expressly dis - claims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. please refer to the companys terms and conditions of sale for further warranty information. luminentoic assumes no liability for applications assistance, customer product design, software performance, or infringement of pat - ents, services, or intellectual property described herein. no license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and luminentoic makes no representations or warranties that the product(s) described here - in are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. luminentoic customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify luminentoic for any damages resulting from such use or sale. the information contained in this document is provided on an as is basis. customer agrees that luminentoic is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. customer must contact luminentoic to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. ? luminentoic, inc. 2006 all rights reserved luminentoic.com 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds515-jan0906 rev. a.2 warnings legal notice ordering information apc : apc fiber rohs compliant -/g5/gr g5 = rohs 5/6-compliant product (lead exemption) gr = full rohs compliant product (no exemption) blank = rohs non-compliant product 06: 1250 mb/s pin-tia +3.3v 04: 622 mb/s pin-tia +3.3v 02: 155 mb/s pin-tia +3.3v 1310nm transmitter c-13/15-fxx-xx-sxxx/xxx-xx 1550nm receiver - : pc fiber fiber output power pin assignment p=pigtail package d =d type "-"=a type connector fc/st/sc/mu/lc/- l/m/h b=bosa
|
