| |
|
 |
Sanyo
|
| Part No. |
LB1668M LB1668 1753
|
| OCR Text |
...r stopping due to, for example, overloading, and cuts the coil current. It also automatically recovers drive and motor turning from the output stopped state when the load returns to an appropriate level. The lock detection time is set with ... |
| Description |
Monolithic Digital IC
From old datasheet system
|
| File Size |
148.25K /
8 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Infineon
SIEMENS[Siemens Semiconductor Group]
|
| Part No. |
TDA4605
|
| OCR Text |
...t voltage declines by secondary overloading.
Semiconductor Group
34
TDA 4605
Pin Definitions and Functions Pin No. 1 Function Regulating Voltage: Information input concerning secondary voltage. By comparing the regulating voltag... |
| Description |
PWM Control IC for SMPS using MOS-Tra...
Control IC for Switched-Mode Power Supplies using MOS-Transistors
From old datasheet system
|
| File Size |
630.08K /
21 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX2247EVKIT
|
| OCR Text |
...or on the EV kit. This prevents overloading of the power sensor and power meter. 2) Connect a DC supply set to +3.3V (through an ammeter, if desired) and connect a voltmeter to the EV kit's VCC and GND terminals. Do not turn on the supply. ... |
| Description |
Evaluation Kit for the MAX2247
From old datasheet system
|
| File Size |
221.00K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX9150EVKIT
|
| OCR Text |
...ignal from circuit 2 to prevent overloading the LVDS driver.
MAX9150 Enable/Disable
The MAX9150 is enabled by applying a logic high to the PWRDN pin and is disabled by applying a logic low. On the MAX9150 EV kit, this can be accomplishe... |
| Description |
Evaluation Kit for the MAX9150
From old datasheet system
|
| File Size |
324.02K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim Integrated Produc...
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| Part No. |
MAX2240EVKIT MAX2240_1 MAX2240
|
| OCR Text |
... the EV kit. This is to prevent overloading of the power sensor and the power meter. 4) Connect a power sensor to the 20dB pad. 5) Connect the power sensor to a power meter. Set the power meter offset to 20dB and frequency to 2.45GHz. 6) Co... |
| Description |
From old datasheet system
Evaluation Kit for the MAX2240
|
| File Size |
143.13K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX2264EVKIT MAX2264EVKIT-MAX2265EVKIT
|
| OCR Text |
...n the EV kit. This will prevent overloading the power sensor and the power meter. 2) Connect a DC supply set to +3.3V (through an ammeter if desired), and connect the voltmeter to the EV kit's VCC and GND terminals. 3) Connect an RF signal ... |
| Description |
Evaluation Kits for the MAX2264/MAX2265/MAX2266
From old datasheet system
|
| File Size |
411.83K /
12 Page |
View
it Online |
Download Datasheet |
| |
|
|
Philips
|
| Part No. |
TDA9830 TDA9830_CNV_2 TDA9830/V1 TDA9830T/V1
|
| OCR Text |
...pacitor up to 5 mA in a case of overloading the AM demodulator by the internal IF signal. AM-demodulator The IF amplifier output signal is fed to a limiting amplifier (two stages) and to a multiplier circuit. However the limiter output sign... |
| Description |
TDA9830; TV sound AM-demodulator and audio source switch
From old datasheet system
|
| File Size |
126.31K /
15 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
