| PART |
Description |
Maker |
| HCPL-T250 |
1.5 Amp Output Current IGBT Gate Drive Optocoupler(1.5 Amp 输出电流IGBT门驱动光耦合
1.5 Amp Output Current IGBT Gate Drive Optocoupler(1.5 Amp 杈???垫?IGBT?ㄩ┍?ㄥ??????
|
Agilent(Hewlett-Packard)
|
| HCPL-T250 HCPL-T250300 HCPL-T250360 HCPL-T250500 H |
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPL-J312 |
HCPL-J312 · 2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
| ACPL-K342-060E ACPL-K342-000E ACPL-K342-560E ACPL- |
2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8
|
AVAGO TECHNOLOGIES LIMI...
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-W314-500E |
ACPL-P314 and ACPL-W314 0.6 Amp Output Current IGBT Gate Driver Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-331J-500E |
1.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO, Fault Status Feedback and Active Miller Clamping
|
AVAGO TECHNOLOGIES LIMITED
|
| SKIIP03NAC066V1 |
Large Current 300mA CMOS LDO Regulators; Output voltage (V): 2.8; Output current (mA): 300; Supply voltage (V): 2.5 to 5.5; I/O voltage difference (mV): 60; Ripple rejection (dB): 60; Circuit current (µA): 65; Package: HVSOF6
3-phase bridge rectifier 3-phase bridge inverter
|
Semikron International
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| FS100UM-03 |
100 A, 30 V, 0.0054 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220
Bench Power Supply; Output Voltage:30V; Output Current:3A; Number of Outputs:3; Calibrated:Yes; Certificate of Calibration:Yes; Output Current 2:.5A; Output Current 3:.5A; Output Voltage 2:12V; Output Voltage 3:5V
HIGH-SPEED SWITCHING USE
|
Mitsubishi Electric Corporation
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| VO3150A-X007T |
0.5 A Output Current IGBT and MOSFET Driver
|
Vishay Siliconix
|
| FOD8316 FOD8316R2 FOD8316R2V FOD8316V |
2.5A Output Current, IGBT Drive Optocoupler
|
Fairchild Semiconductor
|
| HCPL3160 HCPL-3160 |
2.0 Amp IGBT Gate Drive Optocoupler with Integrated Over-current Protection and Fault Feedback
|
Agilent (Hewlett-Packard)
HP[Agilent(Hewlett-Packard)]
|
