PART |
Description |
Maker |
EN29F040A-70TI EN29F040A-70TC EN29F040A-70TCP EN29 |
4 Megabit (512K x 8-bit) Flash Memory 4兆位(为512k × 8位)闪存 Dual D-Type Positive Edge-Triggered Flip-Flop; Package: DIP; No of Pins: 14; Container: Rail Dual D-Type Positive Edge-Triggered Flip-Flop; Package: TSSOP; No of Pins: 14; Container: Tape & Reel Dual D-Type Positive Edge-Triggered Flip-Flop; Package: TSSOP; No of Pins: 14; Container: Rail 4 Megabit (512K x 8-bit) Flash Memory
|
Electronic Theatre Controls, Inc. Eon Silicon Solution Inc. Eon Silicon Solution In...
|
74LVCH16374DGG |
2.5 V/3.3 V 16-bit edge-triggered D-type flip-flop; 3-state
|
NXP Semiconductors
|
74LVT16374A 74LVT16374A_4 |
3.3V LVT 16-bit edge-triggered D-type From old datasheet system
|
Philips
|
ST72561 ST72561AR6 ST72561AR9 ST72561J6 ST72561J9 |
8-BIT MCU WITH FLASH OR ROM, 10-BIT ADC, 5 TIMERS, SPI, LINSCI , ACTIVE CAN 16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 48-SSOP -40 to 85
|
意法半导
|
IDT74LVCH16374A 74LVCH16374A_DS_62505 |
3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOP From old datasheet system
|
IDT
|
HD74ALVCH162374 |
16-bit Edge triggered D-type Flip Flops with 3-state Outputs
|
HITACHI[Hitachi Semiconductor]
|
IDT74LVC16374A 74LVC16374A_DS_68202 |
3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOP From old datasheet system
|
IDT
|
DM74ALS874B DM74ALS874BNT DM74ALS874BWM |
Dual 4-Bit D-Type Edge-Triggered Flip-Flop with 3-STATE Outputs
|
FAIRCHILD[Fairchild Semiconductor]
|
74AVC16374 74AVC16374DGG 74AVC16374_2 |
From old datasheet system 16-bit edge triggered D-type flip-flop; 3.6 V tolerant; 3-state
|
NXP Semiconductors PHILIPS[Philips Semiconductors]
|
74LVT162374 74LVT162374DGG 74LVT162374DL |
3.3 V LVT 16-bit edge-triggered D-type flip-flop with 30 Ohm termination resistors (3-State) 3.3V LVT 16-bit edge-triggered D-type flip-flop with 30 ohm termination resistors 3-State
|
Philips Semiconductors
|
IDT74LVC574A 74LVC574A_DS_31950 IDT74LVC574ASO IDT |
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O From old datasheet system 3.3V CMOS Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs, 5.0V Tolerant I/O 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5V TOLERANT I/O
|
Integrated Device Techn... IDT[Integrated Device Technology]
|