| PART |
Description |
Maker |
| ZXRE4041FR ZXRE4041 ZXRE4041CF ZXRE4041DF ZXRE4041 |
TOOLS,HEX BITS,SETS,FOLD UP TOOL SET, GORILLA GRIP, NUMBER OF PIECE-8, SIZE T6 - T25,HAND TOOLS,GORILLA GRIP<SUP>®</SUP> FOLD-UP TOOL SETS ,BONDHUS 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PDSO8
SOT23 MICROPOWER 1.225V VOLTAGE REFERENCE
IC-SM 1.225V PRECISION REFERENCE
|
Zetex Semiconductor PLC
ZETEX[Zetex Semiconductors]
|
| P0102DA P0102DA1AA3 P0102DA2AL3 P0102DA5AA4 P0102D |
0.8A SCRs
ADD"L TERMINATED WIRES FF
TOOLS,HEX BITS,SETS,FOLD UP TOOL SET, GORILLA GRIP, NUMBER OF PIECE-7, SIZE 1.5 - 6MM,HAND TOOLS,GORILLA GRIP<SUP>®</SUP> FOLD-UP TOOL SETS ,BONDHUS 0.8A可控
0.8A SCRs 0.8A可控
CAT 5E SOLID PVC CABLE STRGHT PIN,350MHZ-YELLOW
|
SGS Thomson Microelectronics
http://
STMicroelectronics N.V.
意法半导
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| IDT71V016 IDT71V016SA IDT71V016SA10BF8 IDT71V016SA |
3.3V CMOS Static RAM 1 Meg (64K x 16-Bit) 64K X 16 STANDARD SRAM, 12 ns, PBGA48
High-Performance Current-Mode PWM Controller 14-SOIC -40 to 85 64K X 16 STANDARD SRAM, 10 ns, PDSO44
64K X 16 STANDARD SRAM, 12 ns, PDSO44 0.400 INCH, PLASTIC, SOJ-44
TOOLS,SCREWDRIVERS,TORX,BALLDRIVER T-HANDLE SET,10-PC.INCH SIZES 3/32-3/8" AND STAND,HAND TOOLS,BALLDRIVER® T-HANDLE SETS ,BONDHUS
3.3V 64K x 16 Static RAM
|
Integrated Device Technology, Inc.
IDT[Integrated Device Technology]
Integrated Device Techn...
|
| MDC-C AVPDB |
Cable Prep Tools Module Termination Tools and Accessories
|
PANDUIT CORP.
|
| CRIMPFOX-6 |
Comprehensive range of crimping pliers
|
PHOENIX CONTACT
|
| BITSYXB |
Compact and battery operated Comprehensive I/O on a single board
|
List of Unclassifed Manufac...
|
| ULN2804 ULN2804A ULN2801 ULN2801A ULN2802A ULN2803 |
EIGHT DARLINGTON ARRAYS
TOOLS,TWEEZERS,TWEEZERS,PLASTIC STATIC DISSIPATIVE TWEEZER, P7-STD, 4-1/2 INCH,HAND TOOLS,PLASTIC STATIC DISSIPATIVE TWEEZERS ,SPC TECHNOLOGY 八达林顿阵列
|
ST Microelectronics
STMicroelectronics N.V.
|
| 2710288 |
Comprehensive diagnostic possibilities such as breakpoints, individual steps, debugging in libraries, instance debugging
|
PHOENIX CONTACT
|
| CMW03-03-0369 |
Tools and harnessing machines
|
Lumberg
|
| 600-067 600-068 |
Pneumatic Banding Tools
|
Glenair, Inc.
|
| CM31-01 |
Tools and harnessing machines
|
Lumberg
|
|
