PART |
Description |
Maker |
4813-BB-24 |
Cable Assembly, Microware Right Angle SMA (Male) Both Ends
|
Pomona Electronics
|
2247-K-24 |
Miniature Double Banana Plug Both Ends Cable Assembly
|
Pomona Electronics
|
CA-2191 |
Cable, right angle P5 to stripped/tinned ends, 6 feet, 18 AWG zip cord
|
Tensility International Corp.
|
3302-20 3302-26 3302-25 3302-15 3302-34 3302-16 03 |
28 AWG wire on .050 inch centers permits mass termination to a broad line of IDC connectors RIBBON CABLE 26 WAY 30.5M 带状电缆26未来30.5 RIBBON CABLE 10 WAY PER M 带状电缆每平方米10未来 RIBBON CABLE 10 WAY 30.5M 带状电缆10未来0.5 RIBBON CABLE 34 WAY 30.5M 带状电缆34未来30.5 RIBBON CABLE 16 WAY 30.5M RIBBON CABLE 15 WAY RIBBON CABLE 25 WAY 30.5M RIBBON CABLE 20 WAY 30.5M
|
3M Electronics Mimix Broadband, Inc. ITW Pancon Electronic Theatre Controls, Inc. Ecliptek, Corp.
|
CRIMPFOX-ZA-5 |
Crimping pliers, for non-insulated connections, (cable lugs, ring or tabtype)
|
PHOENIX CONTACT
|
CRIMPFOX-LC-INC-6 |
Crimp insert for insulated cable lugs and connectors, with locator, 0.5 -6.0 mm2
|
PHOENIX CONTACT
|
SD-87280-0800 0872800800 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 8 Circuits
|
Molex Electronics Ltd.
|
87280-1300 0872801300 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 13 Circuits
|
Molex Electronics Ltd.
|
SD-87280-1500 0872801500 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 15 Circuits
|
Molex Electronics Ltd.
|
0871300300 87130-0300 |
2.50mm (.098) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable 3 Circuits MOLEX Connector
|
Molex Electronics Ltd.
|
0871301800 87130-1800 |
MOLEX Connector 2.50mm (.098) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable 18 Circuits
|
Molex Electronics Ltd.
|