| PART |
Description |
Maker |
| CAT823 CAT823LSDI-G CAT823LTDI-G CAT823MSDI-G CAT8 |
1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5
System Supervisory Voltage Reset with Watchdog and Manual Reset
|
Catalyst Semiconductor
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| TC1278 TC1279 TC1278-10ENBTR TC1278-15ENBTR TC1278 |
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset ...
|
Microchip
|
| MM1136 |
System Reset (with built-in watchdog timer)
From old datasheet system
|
Mitsumi
|
| 12LCT 63LET 355LMT 50LET 35LET 315LMT |
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
Fuse 保险
|
TE Connectivity, Ltd.
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| 3602-12-72 3650-12-52 3650-05-92 3660-05-92 3660-1 |
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit
|
Bivar, Inc.
Pomona Electronics
Xicon Passive Components
|
| 36-250G 36-250A 36-015A 36-015G 36-050G 36-050A 37 |
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit
Signal Conditioner 信号调理
|
Vishay Intertechnology, Inc.
|
| 364TG 364B 364UYL 364UOL 364PG 364UB 364G |
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
Surface Mount Chip LEDs
300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit 表面贴装芯片LED
|
Electronic Theatre Controls, Inc.
|
