| PART |
Description |
Maker |
| 935163290112 PCF1252-0T/F4112 PCF1252-0TD-T PCF125 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
Threshold detector and reset generator; Package: SOT96-1 (SO8); Container: Tube
Threshold detector and reset generator; Package: SOT96-1 (SO8); Container: Tape reel smd
|
NXP SEMICONDUCTORS
|
| TMJ9902 |
Threshold Detector
|
Spectrum Microwave, Inc.
|
| TMJ9904 |
THRESHOLD DETECTOR
|
API Technologies Corp
|
| DTD05080 |
Threshold Detector
|
DAICO[DAICO Industries, Inc.]
|
| DTD08052 |
Threshold Detector
|
DAICO[DAICO Industries, Inc.]
|
| ACSM-2033NM5112 ACSM-2155NM5175X ACSM-2155NZM5175X |
RF/MICROWAVE THRESHOLD DETECTOR
|
|
| HMC612LP4 HMC612LP4E |
75 dB LOGARITHMIC DETECTOR / CONTROLLER, 50 Hz - 3000 MHz
50 MHz - 3000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 10 dBm INPUT POWER-MAX
|
http://
Hittite Microwave Corporation
|
| ACSP-2517NZC8R-RC ACSP-2517NZC32-RC ACSP-2517NZC32 |
100 MHz - 1000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 20 dBm INPUT POWER-MAX ROHS COMPLIANT, CASE C8
100 MHz - 1000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 20 dBm INPUT POWER-MAX ROHS COMPLIANT, CASE C32
100 MHz - 1000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 20 dBm INPUT POWER-MAX ROHS COMPLIANT, CASE C15
|
DB Lectro, Inc.
|
| MAX14575AEVKIT |
Evaluate Preselected Threshold or Adjustable Threshold by Simple Jumper Configuration
|
Maxim Integrated Products
|
| KA75270 KA75270M KA75270Z KA75330Z KA75290M KA7529 |
Voltage Detector (4.5V)
Voltage Detector (2.7V)
Voltage Detector (4.2V)
Voltage Detector (3.9V)
Voltage Detector (2.9V)
Voltage Detector (3.1V)
Voltage Detector 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBCY3
Voltage Detector 电压检测器
Voltage Detector
|
FAIRCHILD[Fairchild Semiconductor]
Fairchild Semiconductor Corporation
Fairchild Semiconductor, Corp.
|
| DTQ6001 |
0.1 TO 6.0 GHz THRESHOLD DETECTOR
|
Teledyne Technologies I...
|
| TC52 TC52N5022ECT TC52N2321ECT TC52N3222ECT TC52N1 |
The TC52 consists of two independent low power volt-age detectors in a space-saving 5-pin SOT-23A package. Typical supply current consumption is only 2 µA at an input voltage of 2V. The voltage detection threshold settings are factory
Dual Channel Voltage Detector
2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5
|
Microchip
|
