| PART |
Description |
Maker |
| 1050-H-ABC0-D-E 1050 |
Distribution Unit for Screw-on Mounting with 1 IEC Appliance Inlet C14 and 1 -Connector F
|
Schurter Inc.
|
| 4741 |
Distribution Unit with 1 IEC Appliance Inlet C14 and 2 Appliance Outlets F, Shuttered
|
Schurter Inc.
|
| 0712 |
Distribution Unit for Snap-in Mounting with 1 IEC Appliance Inlet C14 and 1 Appliance Outlet F
|
Schurter Inc.
|
| 0909.0051 |
Power Distribution Unit; Snap-in mounting from front; solder terminals; protection class I; 7 IEC Outlets; Voltage Rating: 250 VAC; Current Rating: 10A; 10/15A, 250VAC, FEMALE, MAINS POWER CONNECTOR, SOLDER
|
SCHURTER AG
|
| PXD100/050/01/1 PXD301/050/01/1 |
IEC Rectangular Distribution Units
|
Elektron Components Ltd.
|
| 80960MC |
EMBEDDED 32-BIT MICROPROCESSOR WITH INTEGRATED FLOATING-POINT UNIT AND MEMORY MANAGEMENT UNIT
|
INTEL[Intel Corporation]
|
| 6010 6061 GSP1 6610 |
IEC Interconnection Cord with IEC Connector C13, V-Lock, straight
|
Schurter Inc.
|
| KPF6.1 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 6A; Terminal Type: Quick Connect PCB; Very efficientGround contact onThe PCB; IEC/EN 60950
|
SCHURTER INC
|
| MIC2537 MIC2537-1BM MIC2537-2BM |
Quad Power Distribution Switch Preliminary Information 4-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16
Quad Power Distribution Switch(四独立通道 电源分配开
|
Micrel Semiconductor, Inc.
Micrel Semiconductor,Inc.
|
| HIP1012A04 HIP1012ACBZA HIP1012ACB HIP1012A HIP101 |
Dual Power Distribution Controller 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14
Controller, HOT SWAP, Dual, Power Distribution, Control for 5/ 12V or 5/ 3.3V, 100mV Overcurrent Threshold
Controller, Hot Swap, Dual, Power Distribution, Control for 5/ 12V or 5/ 3.3V, 50mV Overcurrent Threshold
|
Intersil, Corp.
INTERSIL[Intersil Corporation]
|
