| PART |
Description |
Maker |
| BGA312 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 11 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| KTS1C1S250 |
Typical RDS(on) (N-Channel)=0.9 Typical RDS(on) (N-Channel)=2.1 Gate-source zener diode
|
TY Semiconductor Co., Ltd
|
| MCT61S MCT61.S MCT61.SD MCT61.W MCT6 MCT62S MCT61 |
8-Pin DIP Dual-Channel Phototransistor Output Optocoupler
DUAL PHOTOTRANSISTOR OPTOCOUPLERS
|
FAIRCHILD[Fairchild Semiconductor]
|
| 61053 61053-001 61053-002 61053-003 61053-004 6105 |
SILICON PHOTOTRANSISTOR “PIGTAIL?
SILICON PHOTOTRANSISTOR “PIGTAIL”
0.7-2mA 50V silicon phototransistor PIGTAIL: type GS3020
|
MICROPAC[Micropac Industries]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MCP603T-E/ST MCP603T-I/ST MCP6022-I/SN MCP6022-I/S |
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
|
Microchip
|
| MOCD207M MOCD208 MOCD208-M MOCD207 MOCD207-M MOCD2 |
DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS
(MOCD207M / MOCD208M) DUAL CHANNEL PHOTOTRANSISTOR
|
FAIRCHILD[Fairchild Semiconductor]
Fairchild Semiconductor Corporation
|
| HG2-AC240V-F HG3-AC240V-F HG4-AC240V-F HG4-AC100V- |
TYPICAL APPLICATIONS
|
Panasonic Semiconductor
|
| IF850 |
Typical Properties
|
LG
|
| 3B-850A |
TYPICAL OPERATIONG CONDITIONS
|
http://
|
| NTLJF3118N NTHD3100F NTMSD6N303 NTHD4N02 NTHD4P02 |
Typical Uses for FETKY Devices
|
ONSEMI[ON Semiconductor]
|
| PCA1292B-LF |
PHASE NOISE (1 Hz BW, typical)
|
Z-Communications, Inc
|
