| PART |
Description |
Maker |
| U2640BNBSP U2640B |
Intemittent- and Wipe/ Wash Control for Wiper Systems BRUSH DC MOTOR CONTROLLER, 1.5 A, PDIP8
Universal wiper control with variable timing by metal mask option
From old datasheet system
|
Atmel, Corp.
ATMEL[ATMEL Corporation]
|
| QTP81X36 QTP82X36 |
QUICKTRONIC?PROFESSIONAL T8 ECG for T8/26mm fluorescent lamps
QUICKTRONIC㈢PROFESSIONAL T8 ECG for T8/26mm fluorescent lamps
|
OSRAM GmbH
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| RX200-20 |
ECG Electronics Degreaser
|
NTE Electronics, Inc.
|
| RX2600-P |
ECG Label & Adhesive Remover Pen
|
NTE Electronics, Inc.
|
| CAT5112VI-00-GT3 CAT5112VI-10-GT3 CAT5112VI-50-GT3 |
32-Tap Digitally Programmable Potentiometer (DPP? with Buffered Wiper
32-Tap Digitally Programmable Potentiometer (DPP?? with Buffered Wiper
32-Tap Digitally Programmable Potentiometer (DPP垄芒) with Buffered Wiper
|
ON Semiconductor
|
| PS25102 |
EPIC ULTRA HIGH IMPEDANCE ECG SENSOR ADVANCE INGORMATION
|
List of Unclassifed Manufacturers
|
| MAX30003CWV |
Ultra-Low Power, Single-Channel Integrated Biopotential (ECG, R to R Detection) AFE
|
MAXIM - Dallas Semiconductor
|
| U642B-MY U642B-MFPG3Y U642B-MFPY U642B_05 U642B U6 |
Interval- and Wipe/ Wash Wiper Control IC
|
Atmel Corp.
ATMEL[ATMEL Corporation]
|
| CAT5112YI-00-G CAT5112LI-00-G CAT5112VI-00-G CAT51 |
32-Tap Digitally Programmable Potentiometer with Buffered Wiper
|
ON Semiconductor
|
| U2642B |
Intermittent- and Wipe/Wash Control for Wiper Systems
|
Atmel
|
