| PART |
Description |
Maker |
| UB2012XG-S08-T UB2012XG-S08-R UB201212 UB2012XL-S0 |
ADVANCED LINEAR CHARGE MANAGEMENT IC FOR SINGLE AND TWO-CELL LITHIUM-ION AND LITHIUM-POLYMER
|
Unisonic Technologies
|
| 796460-5 796460-3 796420-3 |
Highly-Integrated Single Cell Lithium-Ion/Lithium-Polymer Charge Management Cntr, -40C to 85C, 16-SOIC 150mil, TUBE
TERMINAL BLOCK 3 WAY 接线端子3未来
|
Ecliptek, Corp.
|
| MM1291AF MM1291HF MM1291HW |
Protection of lithium ion battery (one cell)
Protection of Lithium Ion Batteries (one cell)
From old datasheet system
|
MITSUMI [MITSUMI ELECTRIC]
Mitsumi Electronics, Corp.
|
| ISL6292-2C ISL6292-1C ISL6292-1CR5 ISL6292-1CR3-T |
Battery Charger, Single Cell Li-ion or Li-Polymer, Vin >2.4v, Programmable Current Limit, Low Thermal Dissipation, 1% Accuracy
Li-ion/Li Polymer Battery Charger
|
INTERSIL[Intersil Corporation]
|
| NE57607GDH NE57607_1 NE57607YDH NE57607 NE57607C N |
Two-cell Lithium-ion battery protection with overcurrent, over- and under-voltage protection 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
Two-cell Lithium-ion battery protection with overcurrent over- and under-voltage protection
From old datasheet system
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| MM1433 |
IC for Control of Lithium-ion Batteries Charging (one cell ~ two cell)
|
Mitsumi
|
| AAT369708 AAT3697IWP-4.2-T1 |
2A Lithium-Ion/Polymer Battery Charger
|
Advanced Analogic Technologies
http://
Advanced Analogic Techn...
|
| AAT3687-1 AAT3687-2 AAT3687IWP-4.2-1-T1 AAT3687IWP |
Lithium-Ion/Polymer Battery Charger
|
Advanced Analogic Technologies
|
| AAT3685IWP-4.2-T1 AAT3685 |
Lithium-Ion/Polymer Battery Charger
|
Advanced Analogic Technologies
|
| AAT3685IWP-4.2-1-T1 AAT368508 AAT3685IWP-4.2-T1 |
Lithium-Ion/Polymer Battery Charger
|
http://
Advanced Analogic Technologies
|
| AAT3690 AAT3690IWP-4.2-T1 |
1.0A USB Port/Adapter Lithium-Ion/Polymer Battery Charger
|
Advanced Analog Technology, Inc.
|
