| PART |
Description |
Maker |
| U8101A |
Customizable and Fewer Steps to Test
|
Agilent(Hewlett-Packard)
|
| U8101A |
Display Tester
Customizable and Fewer Steps to Test
|
Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard...
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| AT91CAP7L200A |
Customizable Microcontroller
|
ATMEL Corporation
|
| AT91CAP7S450A1 |
Customizable Microcontroller
|
ATMEL Corporation
|
| AT91CAP9SC250A AT91CAP9SC500A |
(AT91CAP9SC250A / AT91CAP9SC500A) Customizable Microcontroller Processor
|
ATMEL Corporation
|
| BD2606MVV-E2 |
6-Channel Charge Pump White LED Driver with 64 Dimming Steps and I2C Compatible Interface
|
ROHM
|
| AT91CAPS250A-CJ AT91CAP9S250A AT91CAPS9500A-CJ |
Customizable Microcontroller Processor
Customizable Microcontroller Processor
|
http://
ATMEL Corporation
|
| SPEAR-09-H02206 |
SPEAr Head200 ARM 926, 200K customizable eASIC gates, large IP portfolio SoC
|
STMicroelectronics
|
| HIP6311 |
PWM Controller, 2-4 Phase Sync Buck, 5-Bit VID DAC, 1.100V to 1.850V in 25mV Steps, .8% Reg, Prog Droop Voltage
|
Intersil
|
| BD1754HFN-TR BD1754HFN-12 |
Constant Current LED Driver with 64 Dimming Steps for up to 4 LEDs
|
Rohm
|
| AD8260ACPZ-RL |
High Current Driver Amplifier and Digital VGA/Preamplifier with 3 dB Steps; Package: LFCSP (5x5x.85mm) w/2.7exposed pad; No of Pins: 32; Temperature Range: Industrial SPECIALTY ANALOG CIRCUIT, QCC32
|
Analog Devices, Inc.
|
