| PART |
Description |
Maker |
| AN1334 |
ST10F269/ST10F280 SYSTEM RESET
ST10F269-ST10F280 SYSTEM RESET
|
SGS Thomson Microelectronics
ST Microelectronics
|
| AN1335 |
USING THE ST10F280
|
SGS Thomson Microelectronics
ST Microelectronics
|
| AN1313 |
Porting an application from the ST10F168 to the ST10F269
|
STMicroelectronics
|
| CAT823 CAT823LSDI-G CAT823LTDI-G CAT823MSDI-G CAT8 |
1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5
System Supervisory Voltage Reset with Watchdog and Manual Reset
|
Catalyst Semiconductor
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| MC54F242J MC54F243J MC54_74F242 MC74F243 ON1263 MC |
Supply Voltage Supervisor w/Watchdog input, RESET, /RESET 5-SOT-23 -40 to 85 F/FAST SERIES, 4-BIT TRANSCEIVER, TRUE OUTPUT, PDSO14
Automotive Catalog Supply Voltage Supervisor w/Watchdog Input, RESET, /RESET 5-SOT-23 -40 to 125
(MC74F242 / MC74F243) QUAD BUS TRANSCEIVERS WITH 3-STATE OUTPUTS FAST SCHOTTKY TTL
From old datasheet system
|
Motorola Mobility Holdings, Inc.
Motorola, Inc.
MOTOROLA[Motorola Inc]
ON Semi
|
| MAX6331 MAX6330 1863 MAX6331_UR-T MAX6330_UR-T MAX |
Precision shunt regulator with reset. Reset threshold 4.63V, shunt regulator voltage 5.0V
1.45-W Mono Class-D Audio Amplifier with 1.8V Compatible Shutdown Voltage (TPA2006) 8-SON -40 to 85
Precision Shunt Regulators with Reset in SOT23-3
From old datasheet system
|
Maxim Integrated Products, Inc.
Maixm
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
| S24023SAT S24023SBT S24023S2.7 S24023S2.7T S24023S |
Precision RESET Controller and 4K I2C Memory With Both RESET and RESET Outputs
|
Summit Microelectronics, In...
SUMMIT[Summit Microelectronics, Inc.]
|
| MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
CPU / System Supervisors
Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
Microchip Technology, Inc.
|
| MM1106 |
System Reset (with watchdog timer battery back-up)
From old datasheet system
|
MITSUMI
|
| MM1075 |
System Reset (with built-in watchdog timer)
From old datasheet system
|
Mitsumi
|
| AP163702 |
Reset and System Startup Configuration via PORT0
From old datasheet system
|
Infineon
|
