| PART |
Description |
Maker |
| ATTINY13 |
1-Kbyte In-System programmable Flash Program Memory, 64-Byte SRAM, 64-Byte EEPROM, 32-Byte Register File, 4-channel 10-bit A/D, Up to 16 MIPS throughput at 16 MHz, 5 Volts. 1.8 - 5.5 Volt Operation.
|
Atmel
|
| ISPLSI2128VE ISPLSI2128VE-100LB100 ISPLSI2128VE-10 |
3.3V In-System Programmable SuperFAST?High Density PLD
CRYSTAL 32.768KHZ 12.5PF SMD
3.3V In-System Programmable SuperFAST?/a> High Density PLD
3.3V In-System Programmable SuperFAST⑩ High Density PLD
3.3V In-System Programmable SuperFAST High Density PLD
CRYSTAL 12.0 MHZ 20PF SMD
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PQFP176
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PBGA208
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 6 ns, PBGA208
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 10 ns, PBGA100
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PBGA100
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PQFP160
3.3V In-System Programmable SuperFASTHigh Density PLD EE PLD, 7.5 ns, PQFP100
3.3V In-System Programmable SuperFASTHigh Density PLD 3.3在系统可编程超快⑩高密度可编程逻辑器件
3.3VIn-SystemProgrammableSuperFASTHighDensityPLD
3.3V In-System Programmable SuperFAST?/a> High Density PLD
|
LATTICE[Lattice Semiconductor]
Lattice Semiconductor Corporation
Lattice Semiconductor, Corp.
|
| ST10F272M-4T3 ST10F272M-4TR3 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
意法半导
|
| DSPIC33FJ32MC102 DSPIC33FJ32MC101 DSPIC33FJ32MC104 |
16-Bit Digital Signal Controllers up to 32-Kbyte Flash and 2-Kbyte SRAM
|
Microchip Technology
|
| ST10F273 |
16-bit MCU with 512 Kbyte Flash memory and 36 Kbyte RAM
|
STMicroelectronics
|
| ST10F272 ST10F272Z2Q3 ST10F272Z2T3 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
STMicroelectronics
|
| ST10F271 ST10F271Z1T3 ST10F271Z1Q3 |
16-bit MCU with 128 Kbyte Flash memory and 12 Kbyte RAM
|
STMicroelectronics
|
| ST10F276_06 ST10F276 ST10F276Z5Q3 ST10F276Z5T3 |
16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM
|
STMICROELECTRONICS[STMicroelectronics]
|
| M50FLW040A M50FLW040AK5G M50FLW040AK5P M50FLW040AK |
4-Mbit (5 × 64 Kbyte blocks 3 × 16 × 4 Kbyte sectors) 3-V supply Firmware Hub / low-pin count Flash memory
|
STMicroelectronics
|
| ATMEGA16L |
16-Kbyte self-programming Flash Program Memory, 1-Kbyte SRAM, 512 Byte EEPROM, 8 Channel 10-bit A/D-converter.
|
ATMEL
|
| ATMEGA64 ATMEGA64L |
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 Mhz.
64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 8 MIPS throughput at 8 Mhz. 3 Volt Operation.
|
Atmel
|
