| PART |
Description |
Maker |
| SLP-3117E-51 |
Infrared LED .1mm yellow-green contact type LED lamp ((U-cut version)
┆3.1mm yellow-green contact type LED lamp (U-cut version)
?3.1mm yellow-green contact type LED lamp (U-cut version)
|
SANYO[Sanyo Semicon Device]
|
| GP2A18F GP2A16 |
Visible Light Cut-off Type Photointerrupters with Connector 可见光型光电断路器切断与连接
|
http://
SHARP[Sharp Electrionic Components]
Sharp Corporation
Sharp, Corp.
|
| 53047-0310 |
Header; No. of Contacts:3; Pitch Spacing:1.25mm; No. of Rows:1; Series:53047; Connector Body Material:Nylon; Mounting Type:PC Board; Terminal Type:Straight Pin RoHS Compliant: Yes 3 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| AC08FSMA |
Insulation type TRIAC fully covered with resin on the entire case other than electrode leads
|
Kersemi Electronic Co.,...
|
| PM3700-80-RC PM3700-30-RC |
Power Inductor; Series:PM3700; Inductance:750uH; Terminal Type:PCB Surface Mount; Current Rating:5.5A; Frequency Max:20MHz; Frequency Min:1MHz; Leaded Process Compatible:Yes; Mounting Type:Surface Mount; Packaging:Cut Tape
|
Bourns Inc.
|
| SL0833001-P |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
| SL0810101-01 |
Inside Kinked Leads Use -A after Ametherm’s part #Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
| SL0850001 |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
| SL0510002 |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
| SL0533101 |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
