| PART |
Description |
Maker |
| GMPSA14 |
The GMPSA14 is designed for darlington applications requiring extremely high current gain at collector to 500mA
NPN SILICON DARLINGTON TRANSISTOR
|
E-Tech Electronics LTD
GTM CORPORATION
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| H66T19AA H66T19BA H66T32BA H66T68AA H66T68 H66T68B |
64-Note ROM memory Dynamic speaker can be driven with external NPN transistor
CMOS LSI DESIGNED FOR USE IN DOOR BELL/ TELEPHONE AND TOY
CMOS LSI DESIGNED FOR USE IN DOOR BELL, TELEPHONE AND TOY
|
MICRO-ELECTRONICS[Micro Electronics]
HSMC
Hi-Sincerity Mocroelectronics
Hi-Sincerity Microelectronics
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| NE56610 NE56610-42GW NE56610-45GW NE56612-45GW NE5 |
Family of devices designed to generate a reset signal for a variety of microprocessor and logic systems 家庭旨在生成一个微处理器和逻辑的各种复位信号系统设
Family of devices designed to generate a reset signal for a variety of microprocessor and logic systems 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| GSM31P256KB-I66 GSM31P512KB-I66 |
x64 Interleaved Burst Mode SRAM Module
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| PBP-3201 PBP-3201-22 PBP-3202-22 PBP-3203-22 PBP-3 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc
EQUIPMENT DESIGNED TO CONFORM EMI REGULATIONS SUCH AS VCCI,CISPR,FCC,VDE,ETC
Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc
KPT 10C 10#20 PIN PLUG
KPTC 10C 10#20 SKT PLUG
KPTC 6C 6#20 SKT PLUG
KPTC 8C 8#20 PIN PLUG
|
http://
LAMBDA[DENSEI-LAMBDA]
|
| MZS1220-33 MZS1206 MZS1206-33 MZS1210-33 MZS1215-3 |
Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc 设备设计符合EMI规范，如VCCI，CISPR，催化裂化，德国VDE
|
M.G. Chemicals
LAMBDA[DENSEI-LAMBDA]
http://
|
| 7344-V2T3-ASVA 7344/V2T3-ASVA |
Specially designed for applications
|
Everlight Electronics Co., Ltd
|
| SF2038C |
Designed for SDARS IF Receiver
|
RF Monolithics, Inc
|
| SMJE-3V12W1P3 |
Acrich 2 series designed for...
|
List of Unclassifed Manufacturers
|
