| PART |
Description |
Maker |
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| MAS1215-33 MAS1220-33 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
| S1T2410B01 S1T2410B02 DS_S1T2410B01 S1T2410B02-D0B |
From old datasheet system
bipolar integrated circuit designed as a telephone bell replacement
Low drain current,Adjustable 2-frequency tone,Built-in hysteresis
bipolar integrated circuit designed as telephone bell replacement
|
SAMSUNG SEMICONDUCTOR CO. LTD.
SAMSUNG[Samsung semiconductor]
Samsung Electronic
|
| H5120NL H5120NLT |
1000base -t magnetics module Designed to Support Gigabit Transceivers
1000base -t magnet ics module Designed to Support Gigabit Transceivers
|
Pulse A Technitrol Company
|
| MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
CPU / System Supervisors
Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
Microchip Technology, Inc.
|
| GSM31P256KB-I66 GSM31P512KB-I66 |
x64 Interleaved Burst Mode SRAM Module
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| GSM14P256KB-I66 GSM14P512KB-I66 |
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| HFBR-2505C HFBR-1505A HFBR-2505A HFBR-1505C HFBR-1 |
HFBR-2515B · Fiber Optic Receiver for PROFIBUS Applications
HFBR-1515B · Fiber Optic Transmitter for PROFIBUS Applications
HFBR-0539 · Evaluation Kit designed for PROFIBUS applications that operate up to 12MBd
HFBR-2505A · Fiber Optic Receiver for SERCOS Applications
HFBR-1505A · Fiber Optic Transmitter for SERCOS Applications
HFBR-0540 · Evaluation Kit designed for SERCOS applications that operate up to 10MBd
HFBR-2505C · Fiber Optic Receiver for INTERBUS-S Applications
HFBR-1505C · Fiber Optic Transmitter for INTERBUS-S Applications
HFBR-0538 · Evaluation Kit designed for INTERBUS-S applications that operate at 500kB and 2MBd
Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications
Fiber Optic Receiver for INTERBUS-S Applications
Fiber Optic Transmitter for INTERBUS-S Applications
Evaluation Kit designed for PROFIBUS applications that operate up to 12MBd 评估板用于PROFIBUS的应用而设计，经营2MBd
Fiber Optic Transmitter for INTERBUS-S Applications 光纤变送器的INTERBUS - S应用
|
http://
Agilent (Hewlett-Packard)
HP[Agilent(Hewlett-Packard)]
Coilcraft, Inc.
Avago Technologies, Ltd.
|
| 7344-15UBGC-S400-A5 7344-15UBGC/S400-A5 |
Specially designed for applications
|
http://
Everlight Electronics Co., Ltd
|
| AN1344 |
The VIPer100A-E is designed to deliver
|
STMicroelectronics
|
