| PART |
Description |
Maker |
| 0440671402 44067-1402 SD-44067-001 |
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Wire-to-Board Header
3.00mm (.118) Pitch Micro-Fit 3.0 Wire-to-Board Header
3.00mm (.118") Pitch Micro-Fit 3.0垄芒 Wire-to-Board Header
MOLEX Connector
|
Molex Electronics Ltd.
|
| 43650-0718 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| 44769-2403 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 0447641403 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 44764-2202 0447642202 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 0436500504 |
3.00mm (.118") Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Right Angle, with Press-fit Metal
|
Molex Electronics Ltd.
|
| 0447640401 44764-0401 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 44769-0602 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 44764-2401 0447642401 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic Pegs
|
Molex Electronics Ltd.
|
| 44769-1201 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 2.54um
|
Molex Electronics Ltd.
|
| 44769-0402 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 0.38um
|
Molex Electronics Ltd.
|
| 0430451617 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Vertical, with Press-fit Metal Retention Clip, 16 Circuits
|
Molex Electronics Ltd.
|
|
