| PART |
Description |
Maker |
| PE5011-7 |
PRESET TORQUE WRENCH USE FOR N 14 IN,LBS HEX SIZE 20mm
|
Pasternack Enterprises, Inc.
|
| PE5011-1 |
PRESET TORQUE WRENCH USE FOR SMA, 2,9mm AND 3,5mm 8 IN LBS HEX SIZE 5/16
|
Pasternack Enterprises, Inc.
|
| TSD-02-SAC |
Torque screwdriver, with preset torque of 0.2 Nm and 4 mm hexagonal drive for M8 connectors
|
PHOENIX CONTACT
|
| HSP43168 |
Filter, Dual FIR, 33MHz, Two Independent 8-TAP FIRs or a Single 16-TAP FIR, 10-Bit Data, 10-Bit Coefficients
|
Intersil
|
| CXA2513M |
3-Band Preset Graphic Equalizer IC (with standby and memory on last preset mode)
|
SONY[Sony Corporation]
|
| MC145076D |
MC 145076 Stereo Audio FIR Smoothing Filter
MC145076 Stereo Audio FIR Smoothing Filter SPECIALTY CONSUMER CIRCUIT, PDSO16
|
Motorola, Inc
Motorola Mobility Holdings, Inc.
|
| SAC-BIT-HOOD-W-24 |
Nut for assembling pressure nuts with 24 mm wrench size, for 4 mm hexagonal drive
|
PHOENIX CONTACT
|
| QSH6018-56-28-165 QSH6018-86-28-310 QSH6018 QSH601 |
60mm/NEMA24 1.8隆?stepangle high torque hybrids tepper motor
60mm/NEMA24 1.8掳stepangle high torque hybrids tepper motor
60mm/NEMA24 1.8°stepangle high torque hybrids tepper motor
|
TRINAMIC Motion Control...
TRINAMIC Motion Control GmbH & Co. KG.
|
| AT76C002 |
Programmable FIR Filter
|
ATMEL Corporation
|
| ZHX2010 |
Side-Look FIR Transceiver
|
ZILOG
|
