| PART |
Description |
Maker |
| NLAS7242MUTBG |
High-Speed USB 2.0 (480 Mbps) DPDT Switches RF/MICROWAVE DBL POLE DBL THROW SWITCH
|
ON Semiconductor
|
| FSUSB45UMX |
Hi-Speed USB2.0 (480Mbps) Switch w/Dedicated Charger Port Detect; Package: UMLP; No of Pins: 10; Container: Tape & Reel DBL POLE DBL THROW SWITCH, PDSO10
|
Fairchild Semiconductor, Corp.
|
| ISL54221IRUZ-T |
High-Speed USB 2.0 (480Mbps) Multiplexer; Temperature Range: -40°C to 85°C; Package: 10-uTQFN T&R DBL POLE DBL THROW SWITCH, PDSO10
|
Intersil Corporation
|
| CRS-33S7D-R CRS-33S6D-R CRS-33S8C-R |
0 MHz - 22000 MHz RF/MICROWAVE DBL POLE THREE THROW SWITCH
|
TELEDYNE TECHNOLOGIES INC
|
| CRS-33S1O-R |
0 MHz - 22000 MHz RF/MICROWAVE DBL POLE THREE THROW SWITCH
|
TELEDYNE TECHNOLOGIES INC
|
| FSUSB46UMX |
Hi-Speed USB2.0 (480Mbps) DPST Switch with Dedicated Charger Port Detection; Package: UMLP; No of Pins: 8; Container: Tape & Reel 2-CHANNEL, DBL POLE SGL THROW SWITCH, QCC8
|
Fairchild Semiconductor, Corp.
|
| 1-102055-3 |
HEADER ASSY, MOD ll, DBL ROW, .100X .100 C/L, RIGHT ANGLE, (3) SIDED SHROUD
|
Tyco Electronics
|
| 6-102620-3 6-102620-1 6-102620-6 |
HEADER ASSY, MOD II, DBL ROW, .100X.100 C/L, RIGHT ANGLE, (3) SIDED SHROUD
|
Tyco Electronics
|
| 2-103169-3 2-103169-8 1-103169-0 1-103169-1 1-1031 |
HDR ASSY, MOD II, SHROUDED, 4 SIDES, DBL ROW, VERTICAL, .100X.100 C/L, WITH .025 SQ POSTS
HDR ASSY, MOD II, SHROUDED, 4 SIDES, DBL ROW, VERTICAL, .100 x .100 C/L, WITH .025 SQ POSTS
|
Tyco Electronics
|
| 2-104352-1 2-104352-0 1-104352-2 1-104352-6 |
HEADER ASSY, MOD II, BREAKAWAY, DBL ROW, .100X .100 VERT, .025 SQ POSTS W/ HOLD- OWN CONFIG
HEADER ASSY, MOD II, BREAKAWY, DBL ROW, .100X.100 VERT, .025 SQ POSTS W/ HOLD- DOWN CONFIG
24 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
34 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
|
Tyco Electronics
|
| 860214-1 |
LGH Single-Pin Connectors and Cable Assemblies; LGH-1 DBL MLD END LEAD ( AMP )
|
Tyco Electronics
|
| 2-858885-1 |
LGH Single-Pin Connectors and Cable Assemblies; LGH-1/2 DBL. MLD. END/BRD/GND ( AMP )
|
Tyco Electronics
|
