PART |
Description |
Maker |
AQN121L AQN121V AQN321L AQN321VL AQN221L AQN221V A |
TYPICAL APPLICATIONS
|
Panasonic Semiconductor
|
C1310 C131007 |
Typical Applications
|
Vectron International, Inc
|
C4AEGBW5500A3LJ C4AEHBW5550A3MJ C4AEJBW5550A3NJ C4 |
Typical applications include DC filtering and energy storage. Typical applications include DC filtering and energy storage.
|
Kemet Corporation
|
Q62702-G0042 BGA312 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 11 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz) From old datasheet system
|
SIEMENS AG SIEMENS[Siemens Semiconductor Group]
|
MPX200GVSX MPX200ASX MPX200D MPX200DP MPX200GP MPX |
0 to 200 kPa (0-29 psi) 60 mV FULL SCALE SPAN (TYPICAL) 000千帕-29 PSI)的60压全尺寸跨度(典型) 0 to 200 kPa (0-29 psi) 60 mV FULL SCALE SPAN (TYPICAL) GAGE, PEIZORESISTIVE PRESSURE SENSOR, 0-29Psi, 0.25%, 20-80mV, THROUGH HOLE MOUNT
|
Motorola Mobility Holdings, Inc. Motorola, Inc. MOTOROLA[Motorola, Inc] http://
|
MCP606-I/P MCP606-I/SN MCP606-I/ST MCP609-I/P MCP6 |
The MCP606 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ... The MCP609 quad operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ... The MCP608 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ... The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ... 2.5V TO 5.5V MICROPOWER CMOS OP AMPS
|
Microchip Technology Inc.
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
2SJ144-GR |
Audio Frequency Amplifier Applications Analog Switch Applications Constant Current Applications Impedance Converter Applications
|
Toshiba Semiconductor
|
AD892 AD892E AD892EJP AD892T AD892TJP |
Typical Charactoristics
|
Analog Devices, Inc.
|
2SJ106 |
Field Effect Transistor Silicon P Channel Junction Type Audio Frequency Amplifier Applications Analog Switch Applications Constant Current Applications Impedance Converter Applications
|
TOSHIBA
|
NTLJF3118N NTHD3100F NTMSD6N303 NTHD4N02 NTHD4P02 |
Typical Uses for FETKY Devices
|
ONSEMI[ON Semiconductor]
|