| PART |
Description |
Maker |
| BL-B1134N BL-B1134N-1 BL-B2134N BL-B2134N-1 BL-B24 |
Red, standard LED lamp (round type)
Green, standard LED lamp (round type)
Yellow, standard LED lamp (round type)
Hi-eff red, standard LED lamp (round type)
Bright red, standard LED lamp (round type)
Orange, standard LED lamp (round type)
|
Yellow Stone Corp
|
| SEL4410G SEL4410E SEL4110W SEL4110S SEL4110R SEL42 |
4φ Round-Type Standard LED(φ4 圆形类标准LED)
4 round-type standard LEDs
|
Sanken Electric Co.,Ltd.
SANKEN[Sanken electric]
|
| RLS4148 RLS4150 RLS4448 |
Diodes > JEDEC Standard & Euro Standard Diodes > Surface mounting type
Switching diode
|
ROHM[Rohm]
|
| GSB311111HR GSB311131HR |
USB 3.0 Type A. Right Angle, Receptacle, Through Hole, Standard Type
|
Amphenol Corporation
|
| SLR-343 SLR-343DC SLR-343DU SLR-343MC SLR-343MG SL |
STANDARD TYPE 3.1 CIRCULAR TYPE LED LAMPS 标准3.1圆弧型LED
Reflecting low-dome LEDs (5.0 mm)
|
Rohm Co., Ltd.
Rohm CO.,LTD.
ROHM[Rohm]
|
| SLR-342YY SLR-342 SLR-342DC SLR-342DU SLR-342MC SL |
3.1(T-1) Circular Type Standard Type
|
ROHM[Rohm]
|
| 1747407-4 |
DDR1 DDR2 SODIMM SOCKET 0.6MM PITCH 200POS 8MM HEIGHT STANDARD TYPE (LATCH DIRECT SOLDERING TYPE)
|
Tyco Electronics
|
| AM29824DM AM29826DM AM29822DM AM29822LMB AM29822DM |
9-Bit D-Type Flip-Flop
Reference Design kit for the iP1206 a 300kHz, 30A Synchronous Buck Converter; A IRDCIP1206-B with Standard Packaging
Intelligent Power Module. Gate Driver IC integrated with a half bridge FredFET Designed for sub 250W Motor Drive applications in a 9-Lead SIP. RDSon of 1.0 Ohm; A IR3101 with Standard Packaging 10位D型触发器
IR1150 Demo Board designed for use in continuous conduction mode boost converter applications for power factor correction and harmonic current reduction.; A IRAC1150-300W with Standard Packaging 10位D型触发器
Octal D-Type Flip-Flop 八路D类触发器
|
Toshiba, Corp.
Electronic Theatre Controls, Inc.
ITT, Corp.
ATM Electronic, Corp.
|
| BTB06-600B BTB06-600BRG BTB06-600BW BTB06-600BWRG |
800 V, 6 A, SNUBBERLESS TRIAC, TO-220AB
SNUBBERLESS?? LOGIC LEVEL & STANDARD
SNUBBERLESS LOGIC LEVEL & STANDARD 缓冲器⑩，逻辑电平
(65.93 k) 5.93十一
INDICATOR BODY, ROUND; Lamp fitting type:Midget Groove; Approval Bodies:BEAB, CSA, VDE, UL; Current, contact max:6A; Depth, external:42mm; Diameter, bezel:18mm; IP rating:IP65; Operations, mechanical No. of:1000000; Temp, op. RoHS Compliant: Yes
240 x 128 pixel format, LED or EL Backlight
SC70/SOT23-8, 50mA IOUT, Rail-to-Rail I/O Op Amps with Shutdown/Mute
SNUBBERLESS LOGIC LEVEL & STANDARD
SNUBBERLESS/ LOGIC LEVEL & STANDARD
Transient Voltage Suppressor Diodes
SNUBBERLESS⑩, LOGIC LEVEL & STANDARD
From old datasheet system
SNUBBERLESS, LOGIC LEVEL & STANDARD
6A TRIACS
SNUBBERLESS? LOGIC LEVEL & STANDARD
|
STMicroelectronics N.V.
International Rectifier, Corp.
意法半导
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
SGS Thomson Microelectronics
|
| BAV99WT1 BAV99RWT1 ON0136 BAV99 |
Diodes > JEDEC Standard & Euro Standard Diodes > Surface mounting type
SC-70/SOT-323 Dual Series Switching Diode
BAV99WT1 CASE 419-2, STYLE 9 SC-0/SOT-23
From old datasheet system
|
ROHM
ON Semi
MOTOROLA[Motorola, Inc]
|
| RN5RY201A RN5RY201A-TL RN5RY201A-TR RN5RY201C RN5R |
VFM step-up DC/DC converter controller. Output voltage 3.8V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.7V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.6V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.4V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.3V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.0V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.1V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.8V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.8V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.8V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.7V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.7V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.7V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.6V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.6V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.6V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.5V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.5V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.4V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.3V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.2V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.1V. Taping type TL
VFM STEP-UP DC/DC CONVERTER CONTROLLER 0.05 A SWITCHING CONTROLLER, 180 kHz SWITCHING FREQ-MAX, PDSO5
0.5 A SWITCHING CONTROLLER, PDSO5
VFM step-up DC/DC converter controller. Output voltage 3.1V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.2V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.6V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.7V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.7V. Antistatic bag for samples
|
RICOH[RICOH electronics devices division]
Ricoh Co., Ltd.
RICOH COMPANY LTD
|
