PART |
Description |
Maker |
ADG5404 |
High Voltage Latch-up Proof 4-Channel Multiplexer
|
Analog Devices
|
ADG5423 |
High Voltage Latch-Up Proof, Dual SPST Switches
|
Analog Devices
|
ADG5409BRUZ ADG5409BRUZ-REEL7 ADG5409BCPZ-REEL7 AD |
High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers 8-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16
|
Analog Devices ANALOG DEVICES INC
|
74ALVCH162373T 74ALVCH162373 74ALVCH162373TX |
Low Voltage 16-Bit Transparent Latch with Bushold and 26?Series Resistors in Outputs Quadruple Bus Buffer Gates With 3-State Outputs 14-SO -40 to 85 ALVC/VCX/A SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48 Low Voltage 16-Bit Transparent Latch with Bushold and 26 Series Resistors in Outputs Low Voltage 16-Bit Transparent Latch with Bushold and 26з Series Resistors in Outputs From old datasheet system Low Voltage 16-Bit Transparent Latch with Bushold and 26-Ohm Series Resistors in Outputs Low Voltage 16-Bit Transparent Latch with Bushold and 26 Ohm Series Resistors in Outputs
|
Fairchild Semiconductor, Corp. FAIRCHILD[Fairchild Semiconductor]
|
UH266-15 |
HIGH VOLTAGE HALL EFFECT LATCH
|
Unisonic Technologies
|
US4881 |
CMOS Low Voltage High Sensitivity Latch
|
Micro Electronics
|
AH27807 AH278Z4-BE1 |
HIGH VOLTAGE HALL EFFECT LATCH 高压霍尔效应锁存
|
BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing, Ltd.
|
US3881EUA-AAA-000-BU US3881KSE-AAA-000-RE US3881KU |
Hall Latch Low Voltage & High Sensitivity
|
Melexis Microelectronic...
|
AH3775-P-A AH3775-P-B AH3775-SA-A AH3775-SA-B AH37 |
HIGH-VOLTAGE MEDIUM-SENSITIVITY HALL EFFECT LATCH
|
Diodes Incorporated
|
74V1T77 74V1T77STR 74V1T77CTR |
74V SERIES, HIGH LEVEL TRIGGERED D LATCH, TRUE OUTPUT, PDSO5 SINGLE D-TYPE LATCH
|
STMICROELECTRONICS ST Microelectronics
|
TC1413 TC1413N TC1413NCOA TC1413NCOA713 TC1413NEUA |
3A High-Speed MOSFET Drivers The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ... The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin
|
http:// Microchip
|