PART |
Description |
Maker |
UU642L-S08-T UU642L-S08-R UU642G-S08-T UU642L-D08- |
INTERVAL AND WIPE/WASH WIPER CONTROL IC
|
Unisonic Technologies
|
U2640BNBSP U2640B |
Intemittent- and Wipe/ Wash Control for Wiper Systems BRUSH DC MOTOR CONTROLLER, 1.5 A, PDIP8 Universal wiper control with variable timing by metal mask option From old datasheet system
|
Atmel, Corp. ATMEL[ATMEL Corporation]
|
MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ... The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ... The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ... The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ... The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha 400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ... The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ... IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC Single/Dual Digital Potentiometer with SPI Interface Single/Dual Digital Potentiometer with SPI?/a> Interface Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc. Microchip Technology Inc.
|
EDJ4G0 |
Dual wipe contacts
|
List of Unclassifed Man...
|
4848-6004-CP |
3M DIP Socket Stamped and Formed, Dual-Wipe
|
3M Electronics
|
MAXQ1851 |
DeepCover Secure Microcontroller with Fast Wipe Technology and Cryptography
|
Maxim Integrated Products
|
EBDCD23 |
Timers Interval
|
ETC[ETC]
|
JA3504 |
WIPER CONTROLLER
|
HONGFA[Hongfa Technology]
|
JA3502 |
WIPER CONTROLLER
|
Hongfa Relay HONGFA[Hongfa Technology]
|
JA3502 |
WIPER CONTROLLER
|
厦门宏发电声股份有限公司
|
P8253 8253-5 8253 MAY-53 |
PROGRAMMABLE INTERVAL TIMER
|
http:// INTEL[Intel Corporation] Intel Corp.
|
KS82C54 |
PROGRAMMABLE INTERVAL TIMER
|
Samsung Electronic Samsung semiconductor
|