| PART |
Description |
Maker |
| FZT1048A |
5 Amp continuous current, 20 Amp pulse current.
|
TY Semiconductor Co., Ltd
|
| FZT1047A |
5 Amp continuous current, 20 Amp pulse current.
|
TY Semiconductor Co., Ltd
|
| FCX491 |
60 Volt VCEO, 1 Amp continuous current
|
TY Semiconductor Co., Ltd
|
| FMMT455 |
140 Volt VCEO, 1 Amp continuous current
|
TY Semiconductor Co., Ltd
|
| 2SC4481 2SA1701 |
Ouputs from a Single Supply; 2:1 Wide Range Voltage Input; 3kVDC Isolation; UL94V-0 Package Material; Continuous Short Circuit Protection; Low profile
LOW-FREQUENCY GENERAL-PURPOSE AMP APPLICATIONS
|
Sanyo Electric Co.,Ltd.
SANYO[Sanyo Semicon Device]
|
| PS7112-1A PS7112L PS7112L-1A PS7112L-1A-E3 PS7112L |
6-PIN DIP, 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET 6引脚DIP00毫安的连续负载电1通道光学耦合场效应晶体管
Coaxial Cable; Coaxial RG/U Type:174; Impedance:50ohm; Conductor Size AWG:26; No. Strands x Strand Size:7 x 34; Jacket Material:Polyvinylchloride (PVC); Leaded Process Compatible:Yes; Voltage Nom.:300V RoHS Compliant: Yes
Solid State Relay(固态继电器)
6-PIN DIP / 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
6-PIN DIP 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| PS720C-1A-F3 |
4-PIN SOP, 0.1 Ω LOW ON-STATE RESISTANCE 60 V BREAK DOWN VOLTAGE 1.25 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
|
NEC
|
| HS-1410RH 5962F9851801VXC HS9-1410RH-Q |
Radiation Hardened/ High Speed/ Low Power/ Current Feedback Op Amp with Output Disable
CAP 4-ARRAY 47000PF 16V X7R 1206
Radiation Hardened, High Speed, Low
Power, Current Feedback Op Amp with
Output Disable(抗辐射高速、低功耗电流反馈放大器（输出禁止）)
Radiation Hardened, High Speed, Low Power, Current Feedback Op Amp with Output Disable OP-AMP, PDFP10
|
Intersil Corporation
Intersil, Corp.
|
| MCP6041 MCP6043 MCP6044 MCP6042 MCP6044T MCP6041T |
The MCP6041 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ...
The MCP6044 quad operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ...
The MCP6043 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ...
The MCP6042 dual operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ...
600 nA, Rail-to-Rail Input/Output Op Amps
|
MICROCHIP[Microchip Technology]
|
