| PART |
Description |
Maker |
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| OM9373 |
25A push-pull 3-phase brushless DC motor controller/driver module
|
Omnirel
|
| 9ZXL1230 |
Low-power push-pull outputs
|
Integrated Device Techn...
|
| 087741-00 MX877 087700-00 |
8-Channel, 60V Relay/Load Driver Push-Pull Output, 3 Wire Interface
|
IXYS Corporation
|
| ASM1815R-5 ASM1815R-20 ASM1815-10 ASM1815-5 ASM181 |
150 ms, Low power, 3.3V/3.0 V mP reset, active low, push-pull output
|
Alliance Semiconductor
|
| HV582 |
96-Channel AC Plasma Display Data Driver with High Voltage Push-Pull Outputs
From old datasheet system
|
http://
Supertex, Inc.
Supertex Inc
|
| WT5080 |
8-bit mC with 4Mb ROM, 6.448Kbytes SRAM Push-Pull DAC and 48x32/64x32 LCD Driver
|
Weltrend Semiconductor
|
| SL28PCIE16ALCT SL28PCIE16ALI SL28PCIE16ALIT |
Low power push-pull type differential output buffers
|
Silicon Laboratories
|
| MAX814 MAX814C MAX815 MAX815C MAX815CPA MAX815CSA |
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector.
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
【1% Accuracy, Low-Power, 3V and 5V レP Supervisory Circuits
1% Accuracy Low-Power 3V and 5V P Supervisory Circuits
1% Accuracy, Low-Power, 3V and 5V P Supervisory Circuits
±1% Accuracy, Low-Power, 3V and 5V μP Supervisory Circuits
??% Accuracy, Low-Power, 3V and 5V ?? Supervisory Circuits
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector.
-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit.
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
MAXIM INTEGRATED PRODUCTS INC
|
| EPC3126-1-LF EPC3126-5-LF EPC3126-6-LF EPC3126-2-L |
1 W, SMPS TRANSFORMER
Stand-Off Type Low Power Push-Pull Transformers
|
PCA ELECTRONICS INC.
|
|
