| PART |
Description |
Maker |
| E-1071-627-DC24V-3.1A E-1071-623-DC24V-3.1A |
Designed for inductive loads (DC 24 V)
|
ETAL Group
|
| BTS730 Q67060-S7007-A2 Q67060-S7007A2 |
PWM Power Unit (The device allows continuous power control for lamps/LEDs or inductive loads.)
TRANSISTOR SMD PROFET LESITUNGS MOSFET
PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.)
From old datasheet system
|
SIEMENS AG
SIEMENS[Siemens Semiconductor Group]
|
| L9826TR |
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
|
| L9826 |
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
意法半导
|
| L982605 L9826TR |
Octal Low-Side Driver for Resistive and Inductive Loads with Serial/Parallel Input Control, Output Protection and Diagnostic
|
STMicroelectronics
|
| 871C-DT15NP30-D4 871C-DM1NP3-E2 871C-DT2NP12-D4 87 |
PROXIMITY SENSOR-INDUCTIVE, 15-15mm, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 0.6-0.6mm, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 2-2mm, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 5-5mm, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 10-10mm, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 4-4mm, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 1-4mm, 0-10, CYLINDRICAL
|
Rockwell Automation, Inc.
|
| RE031 |
RE031 [Updated 3/03. 10 Pages] A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output voltage. rated for loads of up
A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output voltage, rated for loads of up to 5 mA. A typical application is real-time clock, backup battery supply in mobile terminals.
|
Atmel
|
| RE027 |
RE027 [Updated 2/03. 9 Pages] RE027 is a low drop out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage. rated for loads up to 130
A Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage, rated for loads of up to 130 mA. A typical application is radio section supply in mobile terminals.
|
Atmel
|
| DS11-1002 DS11-1000 DS11-1003 DS11-1Y DS11-1001 |
DC solid state relay for loads up to 2A @ 60Vdc
|
Tyco Electronics
|
| G5CA-1A-E G5CA-1A-TP-E G5CA-1A4 G5CA-1A4-H |
Flat Relays that Switch 10-A/15-A Loads with New Quick-connect Terminals
|
Omron Electronics LLC
|
