| PART |
Description |
Maker |
| AQW654 AQW654A |
Both 1 Form A and 1 Form B contacts incorporated in a compact DIP8-pin with low on-resistance
|
Panasonic Semiconductor
|
| AD4C113 |
1 Form A/1 Form B Solid State Relay
|
SSOUSA[Solid State Optronic]
|
| FSD20A90 |
Miniature Power Relay, 1 Form A 1 Form B, 10A 250VAC 10A 30VDC, 2 Coil Latching 20 A, 900 V, SILICON, RECTIFIER DIODE
|
Nihon Inter Electronics, Corp.
|
| AQW614 AQW614A AQW614AX AQW614AZ |
GU (General Use) Type [2-Channel (Form A Form B) Type]
|
Matsushita Electric Works(Nais)
ETC
NAIS[Nais(Matsushita Electric Works)]
|
| V23818-N15-L356 V23818-N15-L356-C V23818-M305-L57 |
Small Form Factor Multimode 850 nm 2.125 and 1.0625 GBd Fibre Channel 2x5 Transceiver with LCConnector
Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x10 Pinning with LC Connector/ with Collar
Transceivers by Form-factor MSA - Multimode 850nm VCSEL TRX
Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x5/2x10 Pinning with LC Connector
SMALL FORM FACTOR MULTIMODE 850 NM 2.125 AND 1.0625 GBD FIBRE CHANNEL 2X5 TRANSCEIVER WITH LC⒙ CONNECTOR
Small Form Factor Multimode 850 nm 2.125 and 1.0625 GBd Fibre Channel 2x5 Transceiver with LC Connector
|
Infineon Technologies AG
|
| AQY414SZ AQY14 AQY410SX AQY410SZ AQY414SX |
GU (General Use) Type SOP Series 1- Channel (Form B) 4-Pin Type
GU (General Use) Type SOP Series 1- Channel (Form B) 4-Pin Type 顾（一般使用）型SOP系列1 -频道（表B引脚
PhotoMOS relay, GU (general use) type, 1-channel (form B). Output rating: load voltage 400 V, load current 100 mA.
PhotoMOS relay, GU (general use) type, 1-channel (form B). Output rating: load voltage 350 V, load current 120 mA.
|
Nais(Matsushita Electri...
Panasonic, Corp.
NAIS[Nais(Matsushita Electric Works)]
Matsushita Electric Works(Nais)
|
| CT10-XXXX-G1 |
Ideal for SMD pick and place
|
Coto Technology
|
| 806-22-001-30-004191 |
Spring-Loaded Pin with Removable Pick and Place Cap
|
Mill-Max Mfg. Corp.
|
| 806-22-001-30-011191 |
Spring-Loaded Pin with Removable Pick and Place Cap
|
Mill-Max Mfg. Corp.
|
| 50-00186 |
20802 Sockeye Place #130 Bend, OR 97701 USA
|
Tensility International Corp.
|
| 50-00187 |
20802 Sockeye Place #130 Bend, OR 97701 USA
|
Tensility International Corp.
|
