| PART |
Description |
Maker |
| MICROFOX-E-ESD |
Ergonomically designed two-component handles for fatigue-proof and non-slip use
|
PHOENIX CONTACT
|
| MICROFOX-E-ESD-DB |
Ergonomically designed two-component handles for fatigue-proof and non-slip use
|
PHOENIX CONTACT
|
| REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| REC-14LH REC-16LH |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Unsealed, Designed for High Pressure Chamber of Cylinders, High Accuracy, Very Good Repeatability
|
Vishay
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| TC1037 TC1037CECT TC1039 TC1038 TC1039CECH TC1038C |
The TC1037/1038/1039 are single, low-power comparators designed for low-power applications. These comparators are specifically designed for operation from a single supply. However, operation from dual supplies also is possible, and power s
Linear Building Block . Single Comparator in SOT Packages
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| KIC9321F-005 |
CMOS LSI Designed For FM/MW/LW Radio of PLL Frequency Synthesizer System(用于锁相环频率合成系统FM/MW/LW波段调谐的CMOS大规模集成电
CMOS LSI Designed For FM/MW/LW Radio of PLL Frequency Synthesizer System(用于锁相环频率合成系FM/MW/LW波段调谐的CMOS大规模集成电 的CMOS大规模集成电路设计调中波/龙运的锁相环频率合成系统的无线电（用于锁相环频率合成系统调频/中波/龙运波段调谐的的CMOS大规模集成电路）
|
KEC Holdings
|
| CY38030V208-125NC CY38030V208-125NI CY38030V256-12 |
Programmable Logic : Programmable Logic Devices
CPLD designed for migration. Speed 83 MHz.
CPLD designed for migration. Speed 125 MHz.
|
Cypress
|
| SF2143B |
Designed for SDARS IF
|
RF Monolithics, Inc
|
| MZS1220-33 MZS1206 MZS1206-33 MZS1210-33 MZS1215-3 |
Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc 设备设计符合EMI规范，如VCCI，CISPR，催化裂化，德国VDE
|
M.G. Chemicals
LAMBDA[DENSEI-LAMBDA]
http://
|
