| PART |
Description |
Maker |
| SD-26001-001 |
2.54mm (.100) Pitch Board-to-Board Ribbon Cable Jumper
|
Molex Electronics Ltd.
|
| DBCD1860BSA1 DBCD1860BSB1 DBCD1850BSA1 DBCD1850BSB |
BOARD TO BOARD/WIRE EDGE CARD - RIGHT ANGLE 2.54MM PITCH
|
Dubilier
|
| 0250010906 |
2.54mm (.100) Pitch Board-to-Board Ribbon
MOLEX Connector
|
Molex Electronics Ltd.
|
| 0260010508-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 5 circuits
|
Molex Electronics Ltd.
|
| 0260010301-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 3 circuits
|
Molex Electronics Ltd.
|
| 0250010306-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 26 AWG, Stranded Topcoat, 3 circuits
|
Molex Electronics Ltd.
|
| 0250010406-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 26 AWG, Stranded Topcoat, 4 circuits
|
Molex Electronics Ltd.
|
| 0250010307-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 26 AWG, Stranded Topcoat, 3 circuits
|
Molex Electronics Ltd.
|
| 0260010403-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 4 circuits
|
Molex Electronics Ltd.
|
| 0260010405-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 4 circuits
|
Molex Electronics Ltd.
|
| 0260010305-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 3 circuits
|
Molex Electronics Ltd.
|
| 0250010401-17 |
2.54mm Pitch Board-to-Board Ribbon Cable Jumper - 26 AWG, Stranded Topcoat, 4 circuits
|
Molex Electronics Ltd.
|
