 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SA2018 / 2SA2030 / 2SA2119K Transistors Low frequency transistor 2SA2018 / 2SA2030 / 2SA2119K The transistor of 500mA class which went only into 2125 size conventionally was attained in 1608 sizes or 1208 sizes. 2SA2018 0.3 (3) (1) (2) 0.2 0.5 0.5 0.2 0.55 0.7 Applications For switching, for muting. External dimensions (Unit : mm) 1.0 Features 1) A collector current is large. 2) Collector saturation voltage is low. VCE (sat) 250mA At IC = 200mA / IB = 10mA 0.8 1.6 0.15 0.1Min. Each lead has same dimensions ROHM : EMT3 EIAJ : SC-75A JEDEC : SOT-416 Abbreviated symbol : BW 1.6 (1) Emitter (2) Base (3) Collector 2SA2030 0.2 1.2 0.32 1.2 0.8 (2) (3) (1) 0.2 0.4 0.4 0.8 0.13 0.5 0.22 Each lead has same dimensions ROHM : VMT3 Abbreviated symbol : BW Absolute maximum ratings (Ta=25C) 0.95 0.95 1.9 (1) Base (2) Emitter (3) Collector 0.4 Collector current 0.15 (3) 1.6 2.8 0.8 1.1 Collector power dissipation Junction temperature Storage temperature Single pulse, Pw=1ms 150 300 150 -55 to +150 mW C C 0.3Min. (2) Parameter Collector-base voltage Collector-emitter voltage Symbol VCBO VCEO IC ICP VMT3 PC EMT3 SMT3 Tj Tstg Limits 15 12 500 1 Unit V V mA A 2SA2119K (1) Each lead has same dimensions ROHM : SMT3 EIAJ : SC-59 JEDEC : SOT-346 Abbreviated symbol : BW 2.9 (1) Emitter (2) Base (3) Collector Electrical characteristics (Ta=25C) Parameter Symbol Min. Typ. Max. Unit Conditions Collector-base breakdown voltage BVCBO 15 - - V IC=10A 12 - - V IC=1mA Collector-emitter breakdown voltage BVCEO Emitter-base breakdown voltage BVEBO 6 - - V IE=10A Collector cutoff current ICBO - - 100 nA VCB=15V 270 - 680 - DC current transfer ratio hFE VCE=2V / IC=10mA - 100 250 mV IC=200mA / IB=10mA Collector-emitter saturation voltage VCE (sat) - 260 - MHz VCE=2V, IE=10mA, fT=100MHz Transition frequency fT Output capacitance Cob - 6.5 - pF VCB=10V, IE=0A, f=1MHz Rev.A 1/2 2SA2018 / 2SA2030 / 2SA2119K Transistors Packaging specifications and hFE Type hFE 2SA2119K 2SA2018 2SA2030 Package name Code Basic ordering unit (pieces) T146 3000 - - Taping TL 3000 - - T2L 8000 - - Electrical characteristic curves 1000 1000 VCE=2V VCE=2V 1000 500 IC / IB=20 COLLECTOR CURRENT : IC (mA) 500 500 Ta=125C Ta=25C Ta= -40C 200 100 50 20 10 5 2 1 0 200 100 50 20 10 5 2 Ta=125C Ta=25C Ta= -40C COLLECTOR SATURATION VOLTAGE : VCE (sat) (V) DC CURRENT GAIN : hFE 200 100 50 20 10 5 2 Ta=125C Ta=25C Ta= -40C 0.5 1.0 1.5 1 1 2 5 10 20 50 100 200 500 1000 1 1 2 5 10 20 50 100 200 500 1000 BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.1 Grounded Emitter Propagation Characteristics Fig.2 DC Current Gain vs. Collector Current BASER SATURATION VOLTAGE : VBE (sat) (mV) 10000 5000 2000 1000 500 200 100 50 20 10 1 2 5 10 20 50 100 200 500 1000 Ta= -40C Ta=25C Ta=125C Fig.3 Collector-Emitter Saturation Voltage vs. Collector Current () 1000 1000 500 TRANSITION FREQUENCY : fT (MHz) Ta=25C IC / IB=20 500 200 100 50 20 10 5 2 1 1 2 5 10 20 VCE=2V Ta=25C COLLECTOR SATURATION VOLTAGE : VCE (sat) (mV) 200 100 50 20 10 5 2 1 1 2 5 10 20 50 100 200 500 1000 IC / IB=50 IC / IB=20 IC / IB=10 50 100 200 500 1000 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) EMITTER CURRENT : IC (mA) Fig.4 Collector-Emitter Saturation Voltage vs. Collector Current () EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 1000 500 200 100 50 20 10 5 2 1 0.1 0.2 0.5 1 2 5 10 20 50 100 Cob Cib Fig.5 Base-Emitter Saturation Voltage vs.Collecter Current Fig.6 Gain Bandwidth Product vs. Emitter Current IE=0A f=1MHz Ta=25C EMITTER TO BASE VOLTAGE : VEB (V) Fig.7 Collector Output Capacitance vs. Collector-Base Voltage Emitter Input Capacitance vs. Emitter-Base Voltage Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0 |
Price & Availability of 2SA2018
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |