![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TLP598A TOSHIBA Photocoupler Photo Relay TLP598A Telecommunication Data Acquisition Measurement Instrumentation Unit in mm The TOSHIBA TLP598A consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP598A is a bi-directional switch which can replace mechanical relays in many applications. * * * * * * Peak off-state voltage: 60V (min.) On-state current: 300mA (max.) (A connection) On-state resistance: 2 (max.) (A connection) Isolation voltage: 2500Vrms (min.) UL recognized: UL1577, file no. E67349 Trigger LED current (Ta = 25C) Classification (Note 1) (IFT2) Standard Trigger LED Current (mA) @ION = 300mA Min. 3/4 3/4 Max. 2 5 T2 T2, blank Marking Of Classification TOSHIBA Weight: 0.49 g 11-9A1 (Note 1): Application type name for certification test, please use standard product type name, i. e. TLP598A (IFT2): TLP598A Pin Configuration (top view) 1 2 3 6 5 4 1 : Anode 2 : Cathode 3 : NC 4 : Drain D1 5 : Source 6 : Drain D2 Schematic 1 2 6 5 4 1 2002-09-25 TLP598A Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 25C) LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection On-state RMS current Detector B connection C connection A connection On-state current derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) (Note 2) B connection C connection Tj Tstg Topr Tsol BVS ION/C ION Symbol IF IF/C IFP VR Tj VOFF Rating 30 -0.3 1 5 125 60 300 450 600 -3 -4.5 -6 125 -55~125 -40~85 260 2500 C C C C Vrms mA/C mA Unit mA mA/C A V C V (Note 2): Device considered a two-terminal device: Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min. 10 -20 Typ. 15 Max. 48 20 300 80 Unit V mA mA C Circuit Connections 1 2 3 6 5 4 LOAD or AC DC 1 2 3 6 5 4 LOAD DC 1 2 3 6 5 4 LOAD DC A connection B connection C connection 2 2002-09-25 TLP598A Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 3 V V = 0, f = 1 MHz VOFF = 60 V V = 0, f = 1 MHz Min. 1.2 Typ. 1.4 30 Max. 1.7 10 1 Unit V A pF A pF Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current A connection On-state resistance B connection C connection RON Symbol IFT Test Condition ION = 300 mA ION = 300 mA, IF = 10 mA ION = 450 mA, IF = 10 mA ION = 600 mA, IF = 10 mA Min. Typ. 1 1.4 0.7 0.35 Max. 5 2 1 0.5 Unit mA Isolation Characteristics (Ta = 25C) Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0,f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) Min. 5 10 10 Typ. 0.8 10 14 Max. Unit pF Vrms VDC 2500 3/4 5000 5000 Switching Characteristics (Ta = 25C) Characteristic Turn-on time Turn-off time Symbol tON tOFF Test Condition VDD = 20 V, RL = 200 IF = 10 mA Min. (Note 3) Typ. 0.2 0.2 Max. 0.5 0.5 Unit ms (Note 3): Switching time test circuit IF 1 2 4 VOUT tON VDD 6 RL VOUT 10% tOFF 90% IF 3 2002-09-25 TLP598A IF - Ta 100 240 B connection PC - Ta 80 Alllowable mosfet power disiipation PC (mW) 200 Allowable forward current IF (mA) 60 160 A, C connection 120 40 80 20 40 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) IF - VF 100 50 Ta = 25C 600 C connection ION(RMS) - Ta (mA) 30 (mA) 500 B connection Forward current IF On-state current ION(RMS) 400 A connection 10 5 3 300 200 1 1.0 1.2 1.4 1.6 1.8 2.0 2.2 100 Forward voltage VF (V) 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) IFP - DR 5000 3000 Pulse width 100s Ta = 25C (mA) IFP Pulse forward current 1000 500 300 100 50 30 10 3 10-3 3 10-2 3 10-1 3 10 Duty cycle ratio DR 4 2002-09-25 TLP598A ION - IF 500 A connection Ta = 25C 2.5 RON - Ta A connection IF = 10 mA ION = 300 mA 2.0 (mA) 400 On-state current ION On-state resistance 300 VON = 0.3 V 0.25 V RON 200 0.2 V 0.15 V 100 0.1 V 0.05 V 0 0 2 4 6 8 10 (9) 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 Input current IF (mA) Ambient temperature Ta (C) VON - IF 0.5 A connection Ta = 25C 2.5 IFT - Ta A connection ION = 300 mA (V) 0.4 ION = 300 mA 0.3 200 mA 0.2 100 mA 0.1 (mA) IFT Trigger LED current 2.0 VON 1.5 On-state voltage 1.0 0.5 0 0 2 4 6 8 10 0 -20 0 20 40 60 80 100 Input current IF (mA) Ambient temperature Ta (C) ION -VON 400 A connection Ta = 25C IF = 5 mA 500 tON 1000 tON, tOFF - IF VCC = 20 V RL = 200 Ta = 25C (mA) (s) Switching time 200 On-state current ION 300 0 tOFF 100 -200 50 -400 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 30 1 3 5 10 30 50 On-state voltage VON (V) Input current IF (mA) 5 2002-09-25 TLP598A RESTRICTIONS ON PRODUCT USE 000707EBC * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2002-09-25 |
Price & Availability of TLP598A
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |