|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TPCS8212 TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (U-MOSIII) TPCS8212 Lithium Ion Battery Applications * * * * * * Small footprint due to small and thin package Low drain-source ON resistance: RDS (ON) = 16 m (typ.) High forward transfer admittance: |Yfs| = 11 S (typ.) Low leakage current: IDSS = 10 A (max) (VDS = 20 V) Enhancement-mode: Vth = 0.5~1.2 V (VDS = 10 V, ID = 200 A) Common drain Unit: mm Maximum Ratings (Ta = 25C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC Pulse (Note 1) (Note 1) Symbol VDSS VDGR VGSS ID IDP PD (1) PD (2) PD (1) PD (2) EAS IAR EAR Tch Tstg Rating 20 20 12 6 24 1.1 Unit V V V A Single-device Drain power operation (Note 3a) dissipation Single-device value (t = 10 s) (Note 2a) at dual operation (Note 3b) Drain power dissipation Single-device value (t = 10 s) (Note 2b) at dual operation (Note 3b) Single pulse avalanche energy (Note 4) Avalanche current Repetitive avalanche energy Single-device value at dual operation (Note 2a, 3b, 5) Channel temperature Storage temperature range Single-device operation (Note 3a) JEDEC JEITA TOSHIBA W 2-3R1E 0.75 Weight: 0.035 g (typ.) 0.6 Circuit Configuration 0.35 8 46.8 6 0.075 150 -55~150 mJ A mJ C C 1 2 3 4 7 6 5 Note: (Note 1), (Note 2), (Note 3), (Note 4), (Note 5) Please see next page. This transistor is an electrostatic sensitive device. Please handle with caution. 1 2002-01-17 TPCS8212 Thermal Characteristics Characteristics Single-device operation (Note 3a) Symbol Rth (ch-a) (1) Rth (ch-a) (2) Rth (ch-a) (1) Rth (ch-a) (2) Max 114 C/W 167 Unit Thermal resistance, channel to ambient (t = 10 s) (Note 2a) Single-device value at dual operation (Note 3b) Thermal resistance, channel to ambient (t = 10 s) (Note 2b) Single-device value at dual operation (Note 3b) Single-device operation (Note 3a) 208 C/W 357 Marking (Note 6) Type S8212 Note 1: Please use devices on condition that the channel temperature is below 150C. Note 2: a) Device mounted on a glass-epoxy board (a) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) b) Device mounted on a glass-epoxy board (b) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) (a) (b) Note 3: a) b) The power dissipation and thermal resistance values are shown for a single device (During single-device operation, power is only applied to one device.). The power dissipation and thermal resistance values are shown for a single device (During dual operation, power is evenly applied to both devices.). Note 4: VDD = 16 V, Tch = 25C (initial), L = 1.0 mH, RG = 25 , IAR = 6 A Note 5: Repetitive rating; pulse width limited by max channel temperature. Note 6: on lower right of the marking indicates Pin 1. * shows lot number. (year of manufacture: last decimal digit of the year of manufacture, month of manufacture: January to December are denoted by letters A to L respectively) 2 2002-01-17 TPCS8212 Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Drain cut-OFF current Drain-source breakdown voltage Gate threshold voltage Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth Test Condition VGS = 10 V, VDS = 0 V VDS = 20 V, VGS = 0 V ID = 10 mA, VGS = 0 V ID = 10 mA, VGS = -12 V VDS = 10 V, ID = 200 A VGS = 2.0 V, ID = 4.2 A Drain-source ON resistance RDS (ON) VGS = 2.5 V, ID = 4.2 A VGS = 4.0 V, ID = 4.8 A Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-ON time Switching time Fall time Turn-OFF time Total gate charge (gate-source plus gate-drain) Gate-source charge 1 Gate-drain ("miller") charge tf toff Qg Qgs1 Qgd VDD 16 V, VGS = 5 V, ID = 6 A - |Yfs| Ciss Crss Coss tr ton 5V VGS 0V 4.7 ID = 3 A RL = 3.3 VDS = 10 V, VGS = 0 V, f = 1 MHz VDS = 10 V, ID = 3.0 A Min 20 8 0.5 5.5 VOUT Typ. 26 21 16 11 1590 180 200 6.4 22 10 42 20 3.5 4.5 Max 10 10 1.2 45 29 24 ns nC pF S m Unit A A V V VDD 10 V - Duty < 1%, tw = 10 s = Source-Drain Ratings and Characteristics (Ta = 25C) Characteristics Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol IDRP VDSF Test Condition IDR = 6 A, VGS = 0 V Min Typ. Max 24 -1.2 Unit A V 3 2002-01-17 TPCS8212 ID - VDS 5 4, 5 2 1.7 Common source Ta = 25C Pulse test 10 4, 5 2 1.8 ID - VDS Common source Ta = 25C Pulse test 4 8 (A) ID 3 ID (A) 1.6 6 1.7 Drain current 2 1.5 1 VGS = 1.4 V 0 0 Drain current 4 1.6 2 1.5 VGS = 1.4 V 0.4 0.8 1.2 1.6 2.0 0 0 1 2 3 4 5 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID - VGS 10 Common source VDS = 10 V Pulse test 0.8 VDS - VGS Common source Ta = 25C Pulse test 0.6 8 (A) 6 Drain-source voltage VDS Drain current ID (V) 0.4 1.5 0.2 6 0 0 3 ID = 12 A 4 100 2 Ta = -55C 25 0 0 1 2 3 4 5 2 4 6 8 10 Gate-source voltage VGS (V) Gate-source voltage VGS (V) |Yfs| - ID 100 100 RDS (ON) - ID (S) Yfs 25 2.5 Drain-source ON resistance RDS (ON) (m) 2 Forward transfer admittance Ta = -55C 100 10 VGS = 4 V 10 Common source VDS = 10 V Pulse test 1 0.1 1 10 1 0.1 1 Common source Ta = 25C Pulse test 10 Drain current ID (A) Drain current ID (A) 4 2002-01-17 TPCS8212 RDS (ON) - Ta 60 Common source Pulse test 10 10 5 3 5 IDR - VDS Drain-source ON resistance RDS (ON) (m) IDR (A) 50 1 0 VGS = -1 V 40 VGS = 2 V 30 Drain reverse current 3 20 VGS = 2.5 V VGS = 4 V Common source Ta = 25C Pulse test 1 0 10 ID = 1.5, 3, 6 A 0 -80 -40 0 40 80 120 160 0.2 0.4 0.6 0.8 1.0 1.2 Ambient temperature Ta (C) Drain-source voltage VDS (V) Capacitance - VDS 10000 1.6 Vth - Ta Common source VDS = 10 V ID = 200 A Pulse test Ciss Gate threshold voltage Vth (V) 1.2 (pF) C 1000 0.8 Capacitance Coss 100 Crss Common source Ta = 25C VGS = 0 V f = 1 MHz 1 10 100 0.4 0 -80 -40 0 40 80 120 160 10 0.1 Ambient temperature Ta (C) Drain-source voltage VDS (V) PD - Ta 1.2 (1) Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) Dynamic input/output characteristics 20 Common source ID = 6 A Ta = 25C Pulse test 10 (W) (V) 16 VDS 8 PD Drain-source voltage VDS 0.8 (2) (3) Drain power dissipation t = 10 s 0.6 8 VGS 4 0.4 (4) 0.2 4 2 0 0 50 100 150 200 0 0 8 16 24 0 32 Ambient temperature Ta (C) Total gate charge Qg (nC) 5 2002-01-17 Gate-source voltage 12 VDD = 16 V 6 VGS (V) 1 TPCS8212 rth - tw 1000 Device mounted on a glass-epoxy board (a) (Note 2a) 500 (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) 300 Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) (4) (3) (2) (1) Normalized transient thermal impedance rth (C/W) 100 50 30 10 5 3 1 0.5 0.3 Single pulse 0.1 0.001 0.01 0.1 1 10 100 1000 Pulse width tw (S) Safe operating area 100 50 30 ID max (pulse) * 10 Single-device value at dual operation (Note 3b) 10 ms * 1 ms * (A) Drain current ID 5 3 1 0.5 0.3 0.1 0.05 * Single pulse Ta = 25C 0.03 Curves must be derated linearly with increase in temperature. 0.01 0.01 0.03 0.1 0.3 1 VDSS max 3 10 30 100 Drain-source voltage VDS (V) 6 2002-01-17 TPCS8212 RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 7 2002-01-17 |
Price & Availability of TPCS8212 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |