 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v03.0701 HMC253QS24 Features Low Insertion Loss (2 GHz): 1.3dB Single Positive Supply: Vdd = +5V Integrated 3:8 TTL Decoder 24 Lead QSOP Package GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Typical Applications The HMC253QS24 is ideal for DC - 2.5 GHz applications: * CATV/DBS * CDMA * Cellular/PCS Functional Diagram General Description The HMC253QS24 is a low-cost non-reflective SP8T switch in a 24-lead QSOP package featuring wideband operation from DC to 2.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 3:8 decoder is integrated on the switch requiring only 3 control lines and a positive bias to select each path. The HMC253QS24 SP8T will replace multiple configurations of SP4T and SPDT MMIC switches. 14 SWITCHES - SMT Electrical Specifications, TA = +25 C, For TTL Control and Vdd = +5V in a 50 Ohm system Parameter Frequency DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz 0.3 - 2.5 GHz 0.5 - 2.5 GHz 0.3 - 2.5 GHz 0.3 - 2.5 GHz 0.3 - 2.5 GHz 30 100 ns ns 32 26 24 14 9 6 7 10 20 40 Min. Typ. 1.1 1.3 1.8 36 30 28 18 12 8 10 13 23 43 Max. 1.5 1.7 2.4 Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm Insertion Loss Isolation Return Loss "On State" Return Loss (RF1-8) Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) "Off State" 14 - 142 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v03.0701 HMC253QS24 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz GaAs MMIC Insertion Loss 0 -0.5 SUB-HARMONICALLY Isolation MIXER 17 - 25 GHz PUMPED 0 -10 -40 C RF6, RF3 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 0 1 2 3 FREQUENCY (GHz) +25 C +85 C ISOLATION (dB) -20 -30 -40 -50 -60 RF1, RF2, RF4, RF5, RF7, RF8 -70 0 1 2 3 FREQUENCY (GHz) Return Loss 0 RF1-6 On -5 14 SWITCHES - SMT 14 - 143 RETURN LOSS (dB) RFC -10 -15 -20 RF1-6 Off -25 -30 0 1 2 3 FREQUENCY (GHz) Bias Voltage & Current Vdd Range = +5.0 Vdc 10% Vdd (Vdc) +5.0 Idd (Typ.) (mA) 6.0 Idd (Max.) (mA) 9.0 Truth Table Control Input A Low High Low B Low Low High High Low Low High High C Low Low Low Low High High High High Signal Path State RFCOM to: RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 TTL/CMOS Control Voltages State Low High Bias Condition 0 to +0.8 Vdc @ 5 uA Typ. +2.0 to +5.0 Vdc @ 70 uA Typ. High Low High Low High For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v03.0701 HMC253QS24 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vdd) Control Voltage Range (A, B, C) Storage Temperature Operating Temperature Maximum Input Power Vdd = +5V +7.0 Vdc -0.5V to Vdd +1Vdc -65 to +150 C -40 to +85 C +20 dBm (0.05 - 0.5 GHz) +24 dBm (0.5 - 2.5 GHz) NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4, 5, 6, 7, 8. Outline Drawing 14 SWITCHES - SMT NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 14 - 144 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v03.0701 HMC253QS24 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Evaluation Circuit Board 14 SWITCHES - SMT 14 - 145 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown above. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. List of Material Item J1 - J9 J10 - J14 C1 - C9 C10 U1 PCB* Description PC Mount SMA Connector DC Pin 100 pF Capacitor, 0402 Pkg. 0.01 uF Capacitor, 0603 Pkg. HMC253QS24 SP8T Switch 103704 Eval Board * Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com |
Price & Availability of HMC253QS24
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |