Part Number Hot Search : 
0BZXC 0M350 KR3803X L101G MJF47 FESP05JA OPB780Z 79L12
Product Description
Full Text Search
 

To Download N74F260 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 INTEGRATED CIRCUITS
74F260 Dual 5-input NOR gate
Product specification IC15 Data Handbook 1988 Nov 29
Philips Semiconductors
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
TYPE 74F260
TYPICAL PROPAGATION DELAY 3.5ns
TYPICAL SUPPLY CURRENT (TOTAL) 6mA
PIN CONFIGURATION
D0a D0b D0c 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC Doe D0d D1d D1c D1b D1a
ORDERING INFORMATION
DESCRIPTION 14-pin plastic DIP 14-pin plastic SO COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C N74F260N N74F260D PKG DWG # SOT27-1 SOT108-1
D1e Q0 Q1 GND
SF00829
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS Dna, Dnb, Dnc, Dnd, Dne Q0, Q1 Data inputs Data outputs DESCRIPTION 74F (U.L.) HIGH/LOW 1.0/1.0 50/33 LOAD VALUE HIGH/LOW 20A/0.6mA 1.0mA/20mA
NOTE: One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state.
LOGIC SYMBOL
LOGIC DIAGRAM
D0a 1 2 3 12 13 5
1
2
3
12
13
8
9
10
11
4
D0b D0c
Q0
D0a
D0b
D0c D0d
D0e D1a
D1b
D1c D1d
D1e
D0d D0e
Q0
Q1
D1a D1b
8 9 10 11 4 6 Q1
5 VCC = Pin 14 GND = Pin 7
6
D1c D1d
SF00830
VCC = Pin 14 GND = Pin 7
D1e
SF00832
IEC/IEEE SYMBOL FUNCTION TABLE
INPUTS
1 2 3 12 13 8 9 6 10 11 4 5
OUTPUT Dnd X X X H X L Dne X X X X H L Qn L L L L L H
1
Dna H X X X X L
Dnb X H X X X L
Dnc X X H X X L
H = High voltage level L = Low voltage level X = Don't care
SF00831
1988 Nov 29
2
853-0048 95209
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to VCC 40 0 to +70 -65 to +150 UNIT V V mA V mA C C
RECOMMENDED OPERATING CONDITIONS
LIMITS SYMBOL VCC VIH VIL IIK IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature range 0 PARAMETER MIN 4.5 2.0 0.8 -18 -1 20 +70 NOM 5.0 MAX 5.5 V V V mA mA mA C UNIT
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.) LIMITS SYMBOL PARAMETER TEST CONDITIONSNO TAG VCC = MIN, VIL = MAX VIH = MIN, IOH = MAX Low-level Low level output voltage Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Short-circuit output currentNO TAG Supply current (total) ICCH ICCL VCC = MIN, VIL = MAX VIH = MIN, IOL = MAX VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V VCC = MAX VCC = MAX VIN=GND VIN=4.5V -60 4.6 7.3 10%VCC 5%VCC 10%VCC 5%VCC MIN 2.5 V 2.7 3.4 0.30 0.30 -0.73 0.50 V 0.50 -1.2 100 20 -0.6 -150 6.5 9.5 V A A mA mA mA mA TYP
NO TAG
MAX
UNIT
VO OH
High-level High level output voltage
VO OL VIK II IIH IIL IOS ICC
NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.
1988 Nov 29
3
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
AC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5.V Tamb = +25C CL = 50pF, RL = 500 MIN tPLH tPHL Propagation delay Dna, Dnb, Dnc, Dnd, Dne to Qn Waveform NO TAG 2.5 1.5 TYP 4.0 2.5 MAX 5.5 4.0 VCC = +5.V 10% Tamb = 0C to +70C CL = 50pF, RL = 500 MIN 2.0 1.0 MAX 6.5 4.5 ns UNIT
AC WAVEFORM
For all waveforms, VM = 1.5V.
Dna, Dnb, Dnc, Dnd, Dne
VM tPHL
VM tPLH
Qn
VM
VM
SF00833
Waveform 1. For Inverting Outputs
TEST CIRCUIT AND WAVEFORMS
VCC NEGATIVE PULSE VIN PULSE GENERATOR RT D.U.T. VOUT 90% VM 10% tTHL (tf ) CL RL tw VM 10% tTLH (tr ) 0V 90% AMP (V)
tTLH (tr ) 90% POSITIVE PULSE VM 10% tw
tTHL (tf ) AMP (V) 90% VM 10% 0V
Test Circuit for Totem-Pole Outputs DEFINITIONS: RL = Load resistor; see AC ELECTRICAL CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC ELECTRICAL CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate 1MHz tw 500ns tTLH 2.5ns tTHL 2.5ns
SF00006
1988 Nov 29
4
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
DIP14: plastic dual in-line package; 14 leads (300 mil)
SOT27-1
1988 Nov 29
5
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
1988 Nov 29
6
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
NOTES
1988 Nov 29
7
Philips Semiconductors
Product specification
Dual 5-input NOR gate
74F260
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 10-98 9397-750-05111
Philips Semiconductors
yyyy mmm dd 8


▲Up To Search▲   

 
Price & Availability of N74F260

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X