![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CA5260, CA5260A November 1996 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output Description The CA5260A and CA5260 are integrated-circuit operational amplifiers that combine the advantage of both CMOS and bipolar transistors on a monolithic chip. The CA5260 series circuits are dual versions of the popular CA5160 series. They are designed and guaranteed to operate in microprocessor or logic systems that use +5V supplies. Gate-protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very-high-input impedance, very-low-input current, and exceptional speed performance. The use of PMOS field-effect transistors in the input stage results in common-mode input-voltage capability down to 0.5V below the negative-supply terminal, an important attribute in single-supply applications. A complementary-symmetry MOS (CMOS) transistor-pair, capable of swinging the output voltage to within 10mV of either supply-voltage terminal (at very high values of load impedance), is employed as the output circuit. The CA5260 Series circuits operate at supply voltages ranging from 4.5V to 16V, or 2.25V to 8V when using split supplies. The CA5260, CA5260A have guaranteed specifications for 5V operation over the full military temperature range of -55oC to 125oC. Features * MOSFET Input Stage provides - Very High ZI = 1.5T (1.5 x 1012) (Typ) - Very Low II = 5pA (Typ) at 15V Operation = 2pA (Typ) at 5V Operation * Ideal for Single Supply Applications * Common Mode Input Voltage Range Includes Negative Supply Rail; Input Terminals Can be Swung 0.5V Below Negative Supply Rail * CMOS Output Stage Permits Signal Swing to Either (or Both) Supply Rails * CA5260A, CA5260 Have Full Military Temperature Range Guaranteed Specifications for V+ = 5V * CA5260A, CA5260 are Guaranteed to Operate Down to 4.5V for AOL * Fully Guaranteed to Operate from -55oC to 125oC at V+ = 5V, V- = GND Applications * Ground Referenced Single Supply Amplifiers * Fast Sample-Hold Amplifiers * Long Duration Timers/Monostables * Ideal Interface with Digital CMOS * High Input Impedance Wideband Amplifiers * Voltage Followers (e.g., Follower for Single Supply D/A Converter) * Voltage Regulators (Permits Control of Output Voltage Down to 0V) * Wien Bridge Oscillators * Voltage Controlled Oscillators * Photo Diode Sensor Amplifiers * 5V Logic Systems * Microprocessor Interface Ordering Information PART NUMBER (BRAND) CA5260AE CA5260AM (5260A) CA5260AM96 (5260A) CA5260E CA5260M (5260) CA5260M96 (5260) TEMP. RANGE (oC) -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 PACKAGE 8 Ld PDIP 8 Ld SOIC 8 Ld SOIC Tape and Reel 8 Ld PDIP 8 Ld SOIC 8 Ld SOIC Tape and Reel PKG. NO. E8.3 M8.15 M8.15 E8.3 M8.15 M8.15 Pinout CA5260 (PDIP, SOIC) TOP VIEW OUTPUT (A) INV. INPUT (A) NON INV. INPUT (A) V1 A 2 3 4 8 7 B + 6 5 V+ OUTPUT (B) INV. INPUT (B) NON INV. INPUT (B) - + - CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999 File Number 1929.3 3-146 CA5260, CA5260A Absolute Maximum Ratings Supply Voltage (Between V+ and V- Terminals) . . . . . . . . . . . . . 16V Differential Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . (V+ +8V) to (V- -0.5V) Input Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1mA Output Short Circuit Duration (Note 1) . . . . . . . . . . . . . . . . Indefinite Thermal Information Thermal Resistance (Typical, Note 2) JA (oC/W) PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Maximum Junction Temperature (Die). . . . . . . . . . . . . . . . . . . 175oC Maximum Junction Temperature (Plastic Package) . . . . . . . 150oC Maximum Storage Temperature Range . . . . . . . . . -65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC (SOIC - Lead Tips Only) Operating Conditions Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 1. Short circuit may be applied to ground or to either supply. 2. JA is measured with the component mounted on an evaluation PC board in free air. Electrical Specifications Typical Values Intended Only for Design Guidance, V+ = 5V, V- = 0V, TA = 25C, Unless Otherwise Specified TYPICAL VALUES PARAMETER Input Resistance Input Capacitance Unity Gain Crossover Frequency Slew Rate Transient Response Rise Time Overshoot Settling Time (To <0.1%, VIN = 4VP-P) SYMBOL RI CI fT SR tr OS tS TEST CONDITIONS CA5260 1.5 CA5260A 1.5 4.3 3 5 0.09 10 1.8 UNITS T pF MHz V/s s % s f = 1MHz 4.3 3 VOUT = 2.5VP-P CL = 25pF, RL = 2k (Voltage Follower) 5 0.09 10 CL = 25pF, RL = 2k (Voltage Follower) 1.8 Electrical Specifications PARAMETER Input Offset Voltage Input Offset Current Input Current Common Mode Rejection Ratio TA = 25oC, V+ = 5V, V- = 0V TEST CONDITIONS VO = 2.5V VO = 2.5V VO = 2.5V VCM = 0 to 1V VCM = 0 to 2.5V CA5260 MIN 70 50 2.5 V+ = 1V; V- = 1V RL = , VO = 0.5 to 4V RL = 10k, VO = 0.5 to 3.6V ISOURCE ISINK VOM+ VOMVOM+ VOMVOM+ VOMRL = 2k RL = 10k VO = 0V VO = 5V RL = 70 105 80 1.75 1.70 4.99 4.4 3 TYP 2 1 2 85 55 3 -0.5 84 111 86 2.2 2 5 0 4.7 0 3.4 0 MAX 15 10 15 0 0.01 0.01 0.01 MIN 80 50 2.5 75 107 83 1.75 1.70 4.99 4.4 3 CA5260A TYP 1.5 1 2 85 55 3 -0.5 84 113 86 2.2 2 5 0 4.7 0 3.4 0 MAX 4 10 15 0 0.01 0.01 0.01 UNITS mV pA pA dB dB V V dB dB dB mA mA V V V V V V SYMBOL VIO IIO II CMRR Common Mode Input Voltage Range Power Supply Rejection Ratio Large Signal Voltage Gain (Note 3) VlCR+ VlCRPSRR AOL Source Current Sink Current Output Voltage 3-147 CA5260, CA5260A Electrical Specifications PARAMETER Supply Current TA = 25oC, V+ = 5V, V- = 0V (Continued) TEST CONDITIONS VO = 0V VO = 2.5V NOTE: 3. For V+ = 4.5V and V- = GND; VOUT = 0.5V to 3.2V at RL = 10k. CA5260 MIN TYP 1.60 1.80 MAX 2.0 2.25 MIN CA5260A TYP 1.60 1.80 MAX 2.0 2.25 UNITS mA mA SYMBOL ISUPPLY Electrical Specifications PARAMETER Input Offset Voltage Input Offset Current Input Current Common Mode Rejection Ratio TA = -55oC to 125oC, V+ = 5V, V- = 0V TEST CONDITIONS VO = 2.5V VO = 2.5V VO = 2.5V VCM = 0 to 1V VCM = 0 to 2.5V CA5260 MIN 60 50 2.5 V+ = 1V; V- = 1V RL = , VO = 0.5 to 4V RL = 10k, VO = 0.5 to 3.6V 60 70 60 1.3 1.2 4.99 RL = 10k 4.2 RL = 2k 2.5 VO = 0V VO = 2.5V TYP 3 1 2 78 60 3 -0.5 65 78 65 1.6 1.4 5 0 4.4 0 2.7 0 1.65 1.95 MAX 20 10 15 0 0.01 0.01 0.01 2.2 2.35 MIN 65 50 2.5 62 70 60 1.3 1.2 4.99 4.2 2.5 CA5260A TYP 2 1 2 78 60 3 -0.5 65 78 65 1.6 1.4 5 0 4.4 0 2.7 0 1.65 1.95 MAX 15 10 15 0 0.01 0.01 0.01 2.2 2.35 UNITS mV nA nA dB dB V V dB dB dB mA mA V V V V V V mA mA SYMBOL VIO IIO II CMRR Common Mode Input Voltage Range Power Supply Rejection Ratio Large Signal Voltage Gain (Note 4) VlCR+ VlCRPSRR AOL Source Current Sink Current Output Voltage ISOURCE ISINK VOM+ VOMVOM+ VOMVOM+ VOM- VO = 0V VO = 5V RL = Supply Current ISUPPLY NOTE: 4. For V+ = 4.5V and V- = GND; VOUT = 0.5V to 3.2V at RL = 10k. Electrical Specifications PARAMETER Input Offset Voltage Input Offset Current Input Current Large Signal Voltage Gain Each Amplifier at TA = 25oC, V+ = 15V, V- = 0V, Unless Otherwise Specified TEST CONDITIONS VS = 7.5 VS = 7.5 VS = 7.5 VO = 10VP-P, RL = 10k CA5260 MIN 50 94 70 TYP 6 0.5 5 320 110 90 MAX 15 30 50 MIN 50 94 80 CA5260A TYP 2 0.5 5 320 110 95 MAX 5 20 30 UNITS mV pA pA kV/V dB dB SYMBOL VIO IIO II AOL CMRR Common Mode Rejection Ratio 3-148 CA5260, CA5260A Electrical Specifications PARAMETER Common Mode Input Voltage Range Power Supply Rejection Ratio, VIO/ V Maximum Output Voltage Each Amplifier at TA = 25oC, V+ = 15V, V- = 0V, Unless Otherwise Specified (Continued) TEST CONDITIONS CA5260 MIN 10 VS = 7.5 RL = 10k RL = VO = 7.5V 11 14.99 12 12 VO (Amp A) = 7.5V VO (Amp B) = 7.5V VO (Amp A) = 0V VO (Amp B) = 0V VO (Amp A) = 0V VO (Amp B) = 7.5V Input Offset Voltage Temperature Drift Crosstalk VIO/T f = 1kHz TYP -0.5 to 12 32 13.3 0.002 15 0 22 20 9 1.2 5 8 120 MAX 0 320 0.01 0.01 45 45 16.5 4 9.5 MIN 10 11 14.99 12 12 CA5260A TYP -0.5 to 12 32 13.3 0.002 15 0 22 20 9 1.2 5 6 120 MAX 0 150 0.01 0.01 45 45 16.5 4 9.5 UNITS V V/V V V V V mA mA mA mA mA V/oC dB SYMBOL VlCR PSRR VOM+ VOMVOM+ VOM- Maximum Output Current IOM+ (Source) IOM- (Sink) Total Supply Current, RL = I+ Schematic Diagram V+ 8 AMPLIFIER A AMPLIFIER B Q11 Q10 D2 Q6 Q7 Q9 D3 Q21 Q23 D6 Q20 Q24 Q25 D7 D1 Q1 Q2 D4 R5 2K C1 30pF Q5 Q8 Q22 R12 2K C2 30pF D5 Q16 Q15 R11 1K D8 Q12 Q14 R6 200K C3 Q13 R3 1K Q3 Q26 R10 Q27 1K Q17 R14 300 Q28 C4 R13 200K R4 1K Q19 Q18 R9 1K R8 1K R7 300K Q4 R1 1K R2 1K 2 -IN 17 OUT 6 -IN 3 +IN 5 +IN 4 V- 3-149 CA5260, CA5260A All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 3-150 |
Price & Availability of CA5260
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |