View PCK2014A_154981.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
PCK2014A CK98 (100/133 MHz) spread spectrum system clock generator
Product specification ICL03 -- PC Motherboard ICs; Logic Products Group 2001 Apr 02
Philips Semiconductors
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
FEATURES
* ESD classification testing is done to JEDEC Standard JESD22. * Latch-up testing is done to JEDEC Standard JESD78 * Mixed 2.5 V and 3.3 V operation * Six CPU clocks at 2.5 V * Six PCI clocks at 3.3 V, one free-running * Two 3.3 V fixed clocks @ 66 MHz * Three 2.5 V IOAPIC clocks @ 16.67 MHz * One 3.3 V 48 MHz USB clock * Two 3.3 V reference clocks @ 14.318 MHz * Reference 14.31818 MHz Xtal oscillator input * 133 MHz or 100 MHz operation * Power management control input pins * CPU clock jitter 150 ps cycle-cycle * CPU clock skew 175 ps pin-pin * 0.0 ns - 1.5 ns CPU - 3V66 delay * 1.5 ns - 3.5 ns 3V66 - PCI delay * 1.5 ns - 4.0 ns CPU - IOAPIC delay * 1.5 ns - 4.0 ns CPU - PCI delay * Available in 56-pin SSOP package * 0.6% Center spread spectrum capability via select pins * -0.6% Down spread spectrum capability via select pins
DESCRIPTION
The PCK2014A is a clock generator (frequency synthesizer) chip for a Pentium III and other similar processors. The PCK2014A has six CPU clock outputs at 2.5 V, two 3V66 clocks running at 66 MHz. there are six PCI clock outputs running at 33 MHz. Additionally, the part has three 2.5 V IOAPIC clock outputs at 16.67 MHz and two 3.3 V reference clock outputs at 14.318 MHz. All clock outputs meet Intel's drive strength, rise/fall time, jitter, accuracy, and skew requirements. The part possesses dedicated power-down, CPUSTOP, and PCISTOP input pins for power management control. These inputs are synchronized on-chip and ensure glitch-free output transitions. When the CPUSTOP input is asserted, the CPU clock outputs and 3V66 clock outputs are driven LOW. When the PCISTOP input is asserted, the PCI clock outputs are driven LOW. Finally, when the PWRDWN input pin is asserted, the internal reference oscillator and PLLs are shut down, and all outputs are driven LOW. (synchronous with CPU clocks) which exceeds 100 mA. Protection exceeds 2000 V to HBM per method A114.
PIN CONFIGURATION
VSS 1 REF0 REF1 VDD3V XTAL_IN XTAL_OUT 2 3 4 5 6 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 VDD25V APIC2 APIC1 APIC0 VSS VDD25V CPUCLK5 CPUCLK4 VSS VDD25V CPUCLK3 CPUCLK2 VSS VDD25V CPUCLK1 CPUCLK0 VSS VDD3V VSS PCISTOP CPUSTOP PWRDWN SPREAD SEL1 SEL0 VDD3V 48MHz_USB VSS
VSS 7 VSS PCI_F 8 9
VDD3V 10 PCI_1 11 PCI_2 12 VSS 13 PCI_3 14 PCI_4 15 VDD3V 16 VDD3V 17 PCI_5 18 VSS 19 VSS 20 VSS 21 VDD3V 22 VDD3V 23 VSS 24 3V66_0 25 3V66_1 26 VDD3V 27 SEL133/100 28
SW00879
ORDERING INFORMATION
PACKAGES 56-pin plastic SSOP TEMPERATURE RANGE 0 to +70 C ORDER CODE PCK2014ADL DRAWING NUMBER SOT371-1
Intel and Pentium are registered trademarks of Intel Corporation.
2001 Apr 02
2
853-2245 25964
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
PIN DESCRIPTION
PIN NUMBER 2, 3 5 6 9, 11, 12, 14, 15, 18 25, 26 28 30 32, 33 34 35 36 37 41, 42, 45, 46, 49, 50 53, 54, 55 4, 10, 16, 17, 22, 23, 27, 31, 39 1, 7, 8, 13, 19, 20, 21, 24, 29, 38, 40, 44, 48, 52 43, 47, 51, 56 SYMBOL REF [0-1] XTAL_IN XTAL_OUT PCI_[F, 1-5] 3V66 [0-1] SEL133/100 48 MHz USB SEL [0-1] SPREAD PWRDWN CPUSTOP PCISTOP CPUCLK [0-5] APIC [0-2] VDD3V VSS VDD25V 3.3 V 14.318 MHz clock output 14.318 MHz crystal input 14.318 MHz crystal output 3.3 V PCI clock outputs, pin 9 is a free running PCI clock 3.3 V fixed 66 MHz clock outputs Select input pin for enabling 133 MHz or 100 MHz CPU outputs. H = 133 MHz, L = 100 MHz 3.3 V fixed 48 MHZ clock output Logic select pins. TTL levels. 3.3 V LVTTL input. Enables spread spectrum mode when held LOW. 3.3 V LVTTL input. Device enters powerdown mode when held LOW. 3.3 V LVTTL input. Stops all CPU clocks and 3V66 clocks when held LOW. CPUDIV_2 output remains on all the time. 3.3 V LVTTL input. Stops all PCI clocks except PCICLK_F when held LOW. 2.5 V CPU output. 133 MHz or 100 MHz depending on state of input pin SEL133/100. 2.5 V clock outputs running divide synchronous with the CPU clock frequency. Fixed 16.67 MHz limit. 3.3 V power supply, pins 22 and 23 are analog VDD. Ground, pins 20 and 21 are analog VSS. 2.5 V power supply FUNCTION
NOTE: 1. VDD3V, VDD25V and VSS in the above table reflects a likely internal POWER and GROUND partition to reduce the effects of internal noise on the performance of the device. In reality, the platform will be configured with the VDD25V pins tied to a 2.5 V supply, all remaining VDD pins tied to a common 3.3 V supply and all VSS pins being common. 2. Pins 20 and 21 are analog ground and should be tied to a ground plane. Pins 22 and 23 are analog VDD should be properly decoupled to a 3.3 V supply. These analog power supply pins should not be tied to the PCI power and ground to avoid noise coupling into the analog power supply pins. The PCK2014 provides separate power supplies for the internal digital circuitry (pin 39, VCC) and the internal PLLs of the device (pins 22 and 23, VCC). The purpose of this approach is to try and isolate the high switching noise digital outputs from relatively sensitive analog blocks. In controlled environments such as a test board this level is very well controlled. However, in a mixed signal environment, a second level of isolation may be required.
2001 Apr 02
3
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
BLOCK DIAGRAM
LOGIC
PWRDWN LOGIC XTAL_IN X 14.318 MHZ OSC USBPLL
X REF [0-1](14.318 MHz)
XTAL_OUT X
PWRDWN LOGIC
X 48 MHz USB
SPREAD X
SYSPLL
STOP LOGIC
X CPUCLK [0-5]
SEL133/100 SEL0 SEL1 DECODE LOGIC
STOP LOGIC
X 3V66 [0-1] (66MHz)
STOP LOGIC PCISTOP X CPUSTOP X PWRDWN X PWRDWN LOGIC
X PCI_[F, 1-5] (33 MHz)
X APIC [0-2] (16.67 MHz)
SW00765
2001 Apr 02
4
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
FUNCTION TABLE
SEL 133/100 0 0 0 0 1 1 1 1 SEL1 0 0 1 1 0 0 1 1 SEL0 0 1 0 1 0 1 0 1 CPU HI-Z 100 MHz 100 MHz 100 MHz TCLK/2 133 MHz 133 MHz 133 MHz 3V66 HI-Z 66 MHz 66 MHz 66 MHz TCLK/4 66 MHz 66 MHz 66 MHz PCI HI-Z 33 MHz 33 MHz 33 MHz TCLK/8 33 MHz 33 MHz 33 MHz 48 MHz HI-Z 48 MHz HI-Z 48 MHz TCLK/2 48 MHz HI-Z 48 MHz REF HI-Z 14.318 MHz 14.318 MHz 14.318 MHz TCLK 14.318 MHz 14.318 MHz 14.318 MHz IOAPIC HI-Z 16.67 MHz 16.67 MHz 16.67 MHz TCLK/16 16.67 MHz 16.67 MHz 16.67 MHz NOTES 1 2 3 4, 7, 8 5, 6 2 3 4, 7, 8
NOTES: 1. Required for board level "bed-of-nails" testing. 2. Philips center spread mode. 3. 48 MHz PLL disabled to reduce component jitter. 48 MHz outputs to be held Hi-Z instead of driven to LOW state. 4. "Normal" mode of operation. 5. TCLK is a test clock over driven on the XTALIN input during test mode. TCLK mode is based on 133 MHz CPU select logic. 6. Required for DC output impedance verification. 7. Frequency accuracy of 48 MHz must be +167 PPM to match USB default. 8. Range of reference frequency allowed is MIN = 14.316 MHz, NOMINAL = 14.31818 MHz, MAX = 14.32 MHz CLOCK OUTPUT USBCLK7 TARGET FREQUENCY (MHz) 48.0 ACTUAL FREQUENCY (MHz) 48.008 PPM 167
CLOCK ENABLE CONFIGURATION
CPUSTOP X 0 0 1 1 PWRDWN 0 1 1 1 1 PCISTOP X 0 1 0 1 CPUCLK LOW LOW LOW ON ON APIC LOW ON ON ON ON 3V66 LOW LOW LOW ON ON PCI LOW LOW ON LOW ON REF / 48 MHz LOW ON ON ON ON OSC OFF ON ON ON ON VCOs OFF ON ON ON ON
NOTES: 1. LOW means outputs held static LOW as per latency requirement below 2. ON means active. 3. PWRDWN pulled LOW, impacts all outputs including REF and 48 MHz outputs. 4. All 3V66 clocks as well as CPU clocks should stop cleanly when CPUSTOP is pulled LOW. 5. CPUDIV2, IOAPIC, REF, 48 MHz signals are not controlled by the CPUSTOP functionality and are enabled all in all conditions except when PWRDWN is LOW.
POWER MANAGEMENT REQUIREMENTS
SIGNAL CPUSTOP PCISTOP PWRDWN SIGNAL STATE 0 (DISABLED) 1 (ENABLED) 0 (DISABLED) 1 (ENABLED) 1 (NORMAL OPERATION) 0 (POWER DOWN) LATENCY NO. OF RISING EDGES OF FREE RUNNING PCICLK 1 1 1 1 3 ms 2 MAX
NOTES: 1. Clock ON/OFF latency is defined as the number of rising edges of free running PCICLKs between the clock disable goes HIGH/LOW to the first valid clock that comes out of the device. 2. Power up latency is when PWRDWN goes inactive (HIGH) to when the first valid clocks are driven from the device.
2001 Apr 02
5
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to VSS (VSS = 0 V). SYMBOL VDD3 VDDQ3 VDDQ2 IIK VI IOK VO IO Tstg PTOT PARAMETER DC 3.3 V core supply voltage DC 3.3 V I/O supply voltage DC 2.5 V I/O supply voltage DC input diode current DC input voltage DC output diode current DC output voltage DC output source or sink current Storage temperature range Power dissipation per package plastic medium-shrink (SSOP) For temperature range: -40 to +125 C above +55 C derate linearly with 11.3 mW/K VI < 0 Note 2 VO > VCC or VO < 0 Note 2 VO = 0 to VCC -65 -0.5 -0.5 CONDITION LIMITS MIN -0.5 -0.5 -0.5 MAX +4.6 +4.6 +3.6 -50 5.5 50 VCC + 0.5 50 +150 850 UNIT V V V mA V mA V mA C mW
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL VDD3V VDD25V PARAMETER DC 3.3 V core supply voltage DC 2.5 V I/O supply voltage Capacitive load on: CPUCLK PCI 3V66 48 MHz clock USB REF APIC DC input voltage range DC output voltage range Reference frequency, oscillator nominal value Operating ambient temperature range in free air 1 device load, possible 2 loads Must meet PCI 2.1 requirements 1 device load, possible 2 loads 1 device load 1 device load 1 device load CONDITIONS LIMITS MIN 3.135 2.375 10 10 10 10 10 10 0 0 14.31818 0 MAX 3.465 2.625 20 30 30 20 20 20 VDD3V VDD25V VDD3V 14.31818 +70 UNIT V V pF pF pF pF pF pF V V MHz C
CL
VI VO fREF Tamb
POWER MANAGEMENT
CK133 CONDITION Power-down mode (PWRDWN = 0) Full active 100 MHz SEL133/100 = 0 SEL1, 0 = 1 1 CPUSTOP, PCISTOP = 1 Full active 133 MHz SEL133/100 = 1 SEL1, 0 = 1 1 CPUSTOP, PCISTOP = 1 MAXIMUM 2.5V SUPPLY CONSUMPTION MAXIMUM DISCRETE CAP LOADS, VDD25V = 2.625 V ALL STATIC INPUTS = VDD3V OR VSS 100 A MAXIMUM 3.3V SUPPLY CONSUMPTION MAXIMUM DISCRETE CAP LOADS, VDD25V= 3.465 V ALL STATIC INPUTS = VDD3V OR VSS 200 A
80 mA
80 mA
90 mA
80 mA
2001 Apr 02
6
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
DC CHARACTERISTICS
TEST CONDITIONS SYMBOL PARAMETER VDD (V) VIH VIL VOH2 VOL2 VOH3 VOL3 VOH3 VOL3 IO OH IO OH IO OH IO OL IO OL IO OL II IOZ Cin Cxtal Cout HIGH level input voltage LOW level input voltage 2.5 V output HIGH voltage CPUCLK, APIC 2.5 V output LOW voltage CPUCLK, APIC 3.3 V output HIGH voltage REF, 48 MHz USB 3.3 V output LOW voltage REF, 48 MHz USB 3.3 V output HIGH voltage PCI, 3V66 3.3 V output LOW voltage PCI, 3V66 APIC, CPUCLK , output HIGH current 48 MHz USB, REF , output HIGH current PCI, 3V66 , output HIGH current APIC, CPUCLK , output LOW current 48 MHz USB, REF , output LOW current PCI, 3V66 , output LOW current Input leakage current 3-State output OFF-State current Input pin capacitance Xtal pin capacitance, as seen by external crystal Output pin capacitance 18 6 3.135 to 3.465 3.135 to 3.465 2.375 to 2.625 2.375 to 2.625 3.135 to 3.465 3.135 to 3.465 3.135 to 3.465 3.135 to 3.465 2.375 2.625 3.135 3.465 3.135 3.465 2.375 2.625 3.135 3.465 3.135 3.465 3.465 3.465 VOUT = Vdd or GND IO = 0 IOH = -1 mA IOL = 1 mA IOH = -1 mA IOL = 1 mA IOH = -1 mA IOL= 1 mA VOUT = 1.0 V VOUT = 2.375 V VOUT = 1.0 V VOUT = 3.135 V VOUT = 1.0 V VOUT = 3.135 V VOUT = 1.2 V VOUT = 0.3 V VOUT = 1.95 V VOUT = 0.4 V VOUT = 1.95 V VOUT = 0.4 V OTHER VDD25V = 2.5 V 5% VDD3V = 3.3 V 5% LIMITS Tamb = 0 to +70 C MIN 2.0 VSS - 0.3 2.3 - 2.0 - 2.4 - -27 - -29 - -33 - 27 - 29 - 30 - - - TYP MAX VDD + 0.3 0.8 - 0.25 - 0.4 - 0.55 - -27 - -23 - -33 - 30 - 27 - 38 5 10 5 V V V V V V V V mA mA mA mA mA mA A A pF pF pF UNIT
2001 Apr 02
7
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
AC CHARACTERISTICS
VDD3V = 3.3 V 5%; VDDAPIC = VDD25V = 2.5 V 5%; fcrystal = 14.31818 MHz
CPU CLOCK OUTPUTS, CPU(0-5) (LUMP CAPACITANCE TEST LOAD = 20 pF)
SYMBOL PARAMETER LIMITS Tamb = 0 to +70 C 133 MHz MODE MIN THKP(avg) THKP(abs_,om) THKH THKL THRISE THFALL TJITTER DUTY CYCLE THSKW Average CPUCLK period Absolute minimum CPUCLK period CPUCLK HIGH time CPUCLK LOW time CPUCLK rise time CPUCLK fall time CPUCLK cycle-cycle jitter Output Duty Cycle CPUCLK pin-pin skew 45 7.5 7.35 1.87 1.67 0.4 0.4 MAX 7.65 n/a n/a n/a 1.6 1.6 150 55 175 45 LIMITS Tamb = 0 to +70 C 100 MHz MODE MIN 10.0 9.85 3.0 2.8 0.4 0.4 MAX 10.3 n/a n/a n/a 1.6 1.6 150 55 175 ns ps ns ns ns ns ps % ps 1 2 5, 10 6, 10 8 8 2, 9 UNIT NOTES
PCI CLOCK OUTPUTS, PCI(0-5) (LUMP CAPACITANCE TEST LOAD = 30 pF)
SYMBOL PARAMETER LIMITS Tamb = 0 to +70 C 133 MHz MODE MIN THKP THKH THKL THRISE THFALL TJITTER DUTY CYCLE THSKW PCI period PCI HIGH time PCI LOW time PCI rise time PCI fall time PCI cycle-cycle jitter PCI Duty Cycle PCI pin-pin skew 45 30.0 12.0 12.0 0.5 0.5 MAX n/a n/a n/a 2.0 2.0 300 55 500 45 LIMITS Tamb = 0 to +70 C 100 MHz MODE MIN 30.0 12.0 12.0 0.5 0.5 MAX n/a n/a n/a 2.0 2.0 300 55 500 ns ns ns ns ns ps % ps 1 2 2, 9 5, 10 6, 10 8 8 UNIT NOTES
APIC(0-1) CLOCK OUTPUT (LUMP CAPACITANCE TEST LOAD = 20 pF)
SYMBOL PARAMETER LIMITS Tamb = 0 to +70 C 133 MHz MODE MIN THKP THKH THKL THRISE THFALL TJITTER DUTY CYCLE THSKW APIC CLK period APIC CLK HIGH time APIC CLK LOW time APIC CLK rise time APIC CLK fall time APIC CLK cycle-cycle jitter APIC CLK Duty Cycle APIC CLK pin-pin skew 45 60.0 25.5 25.3 0.4 0.4 MAX 61.2 n/a n/a 1.6 1.6 500 55 250 45 LIMITS Tamb = 0 to +70 C 100 MHz MODE MIN 60.0 25.5 25.3 0.4 0.4 MAX 61.2 n/a n/a 1.6 1.6 500 55 250 ns ns ns ns ns ps % ps 1 2 2, 9 5, 10 6, 10 8 8 UNIT NOTES
2001 Apr 02
8
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
3V66 CLOCK OUTPUT, 3V66 (0-1) (LUMP CAPACITANCE TEST LOAD = 30 pF)
SYMBOL PARAMETER LIMITS Tamb = 0 to +70 C 133 MHz MODE MIN THKP THKH THKL THRISE THFALL TJITTER DUTY CYCLE THSKW 3V66 CLK period 3V66 CLK HIGH time 3V66 CLK LOW time 3V66 CLK rise time 3V66 CLK fall time 3V66 CLK cycle-cycle jitter 3V66 CLK Duty Cycle 3V66 CLK pin-pin skew 45 15.0 4.95 4.55 0.5 0.5 MAX 15.3 n/a n/a 2.0 2.0 500 55 250 45 LIMITS Tamb = 0 to +70 C 100 MHz MODE MIN 15.0 4.95 4.55 0.5 0.5 MAX 15.3 n/a n/a 2.0 2.0 500 55 250 ns ns ns ns ns ps % ps 1 2 2, 9, 4 5, 10 6, 10 8 8 UNIT NOTES
48MHZ CLOCK OUTPUT (LUMP CAPACITANCE TEST LOAD = 20 pF)
SYMBOL THKP THKH THKL THRISE (tR) THFALL (tF) DUTY CYCLE (tD) TJITTER PARAMETER 48 MHz clock period average 48 MHz clock HIGH time 48 MHz clock LOW time Output rise edge rate Output fall edge rate Duty Cycle CLK cycle-cycle jitter LIMITS 133 MHz Tamb = 0 to +70 C MIN 20.83 7.57 7.17 1 1 45 MAX 20.83 n/a n/a 4 4 55 500 LIMITS 100 MHz Tamb = 0 to +70 C MIN 20.83 7.57 7.17 1 1 45 MAX 20.83 n/a n/a 4 4 55 500 3 ns ns ns ns ns % ps ms 2 UNIT NOTES
THSTB (fST) Frequency stabilization from Power-up (cold start) NOTE: 1. See Figure 5 for measure points. 2. Average period over 1 s.
2001 Apr 02
9
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
AC CHARACTERISTICS (Continued)
TEST CONDITIONS SYMBOL PARAMETER Measurement loads (lumped) CPU@20 pF, 3V66@30 pF 3V66@30 pF, PCI@30 pF CPU@20 pF, IOAPIC@20 pF CPU@20 pF PCI@30 pF Measure points CPU@1.25 V, 3V66@1.5 V 3V66@1.5 V, PCI@1.5 V 3CPU@1.25 V, IOAPIC@1.25 V CPU@1.25 V PCI@1.5 V LIMITS Tamb = 0 to +70 C MIN 0.0 1.5 1.5 1.5 TYP 0.45 2.0 2.4 2.7 MAX 1.5 3.5 4.0 4.0 ns ns ns ns 1 1 1 UNIT NOTES
THPOFFSET THPOFFSET THPOFFSET THPOFFSET
CPUCLK to 3V66 CLK, CPU leads 3V66 CLK to PCI, 3V66 leads CPUCLK to APIC, CPU leads CPUCLK to PCI, CPU leads
NOTES: 1. Output drivers must have monotonic rise/fall times through the specified VOL/VOH levels. 2. Period, jitter, offset and skew measured on rising edge @1.25 V for 2.5 V clocks and @ 1.5 V for 3.3 V clocks. 3. The PCI is the CPUCLK divided by four at CPUCLK = 133 MHz. The 3V66 CLK is internal VCO frequency divided by three at CPUCLK = 100 MHz. 4. 3V66 CLK is internal VCO frequency divided by two at CPUCLK = 133 MHz. The 3V66 CLK is internal VCO frequency divided by three at CPUCLK = 100 MHz. 5. THKH is measured at 2.0 V for 2.5 V outputs, 2.4 V for 3.3 V outputs as shown in Figure 4. 6. THKL is measured at 0.4 V for all outputs as shown in Figure 4. 7. The time is specified from when VDDQ achieves its nominal operating level (typical condition VDDQ = 3.3 V) until the frequency output is stable and operating within specification. 8. THRISE and THFALL are measured as a transition through the threshold region VOL = 0.4 V and VOH = 2.4 V for 3 V outputs, VOL = 0.4 V, and VOH = 2.0 V for 2.5 V outputs. (1 mA) JEDEC specification. 9. The average period over any 1 s period of time must be greater than the minimum specified period. 10. Calculated at minimum edge-rate (1 V/ns) to guarantee 45/55% duty-cycle. Pulse width is required to be wider at faster edge-rate to ensure duty-cycle specification is met. 11. Output (see Figure 5 for measure points).
2001 Apr 02
10
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
SPREAD SPECTRUM FUNCTION TABLE
SPREAD# pin 34 0 (active) 0 (active) 0 (active) 0 (active) 0 (active) 0 (active) 0 (active) 0 (active) 1 (inactive) 1 (inactive) 1 (inactive) 1 (inactive) 1 (inactive) 1 (inactive) 1 (inactive) 1 (inactive) SEL133/100# pin 28 0 (100 MHz) 0 (100 MHz) 0 (100 MHz) 0 (100 MHz) 1 (133 MHz) 1 (133 MHz) 1 (133 MHz) 1 (133 MHz) 0 (100 MHz) 0 (100 MHz) 0 (100 MHz) 0 (100 MHz) 1 (133 MHz) 1 (133 MHz) 1 (133 MHz) 1 (133 MHz) SEL1 pin 33 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 SEL0 pin 32 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 3-State to High Impedance 100 MHz, Center Spread 0.6% 100 MHz, Down Spread -0.6% 100 MHz, Down Spread -0.6% Test Mode 133 MHz, Center Spread 0.6% 133 MHz, Down Spread -0.6% 133 MHz, Down Spread -0.6% 3-State to High Impedance 100 MHz, No Center Spread 100 MHz, No Down Spread 100 MHz, No Down Spread Test Mode 133 MHz, No Center Spread 133 MHz, No Down Spread 133 MHz, No Down Spread Function F nction
2001 Apr 02
11
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
AC WAVEFORMS
VM = 1.25 V @ VDDQ2 and 1.5 V @ VDDQ3 VX = VOL + 0.3 V VY = VOH -0.3 V VOL and VOH are the typical output voltage drop that occur with the output load.
THKH 2.5V CLOCKING INTERFACE 2.0 1.25 0.4
THKP DUTY CYCLE
THKL VDDQ2 CPUCLK @133MHz 1.25V VSS 3.3V CLOCKING INTERFACE (TTL) 2.4 1.5 0.4 TPKL TRISE VSS CPU leads 3V66 THPOFFSET TFALL TPKH TRISE TFALL TPKP
VDDQ3 3v66 @66MHz 1.5V
SW00242
Figure 4. 2.5V/3.3V clock waveforms
SW00354
Figure 1. CPUCLK to 3V66 offset
COMPONENT MEASUREMENT POINTS
2.5 V MEASUREMENT POINTS VOH = 2.0 V 1.25 V VDDQ2
VOL = 0.4 V VSS VDDQ3 3V66 @ 66MHz 1.5V VSS COMPONENT MEASUREMENT POINTS SYSTEM MEASUREMENT POINTS 3.3 V MEASUREMENT POINTS VOH = 2.4 V 1.5 V VDDQ3 PCICLK @ 33MHz 1.5V VSS
3V66 leads PCICLK
VDDQ3
VOL = 0.4 V VSS SYSTEM MEASUREMENT POINTS
SW00822
THPOFFSET
Figure 5. Component versus system measure points
SW00356
Figure 2. 3V66 to PCI offset
VI SEL133/100, SEL1, SEL0 GND VDDQ2 VM
CPUCLK @ 133MHz
1.25V VSS VDD OUTPUT LOW-to-OFF OFF-to-LOW VOL VSS CPUCLK leads IOAPIC THPOFFSET VOH OUTPUT HIGH-to-OFF OFF-to-HIGH VSS
tPLZ
tPZL
VM VX
VDDQ2 IOAPIC @ 16.6MHz 1.25V
tPHZ
tPZH
VY VM
SW00357
Figure 3. CPU to IOAPIC offset
outputs enabled
outputs disabled
outputs enabled
SW00454
Figure 6. 3-State enable and disable times
2001 Apr 02
12
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
S1 VDD 2RT
CL
500
TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH
S1 Open 2VDD = VDDQ2 or VDDQ3, DEPENDS ON THE OUTPUT
SW00238
Figure 7. Load circuitry for switching times
PWRDWN
CPUCLK (INTERNAL)
PCICLK (INTERNAL)
PWRDWN
CPUCLK (EXTERNAL)
PCICLK (EXTERNAL)
OSC & VCO
USB (48MHz)
Figure 8. Power Management
2001 Apr 02
13
A A A A
SW00244
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm
SOT371-1
2001 Apr 02
14
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
NOTES
2001 Apr 02
15
Philips Semiconductors
Product specification
CK98 (100/133 MHz) spread spectrum system clock generator
PCK2014A
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 2001 All rights reserved. Printed in U.S.A. Date of release: 04-01 Document order number: 9397 750 08211
Philips Semiconductors
2001 Apr 02
16

▲Up To Search▲

Price & Availability of PCK2014A

	To Download PCK2014A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .