 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Voltage Regulators AN1432MS Variable output, low voltage operation shunt regulator IC The AN1432MS is a low voltage operation and positive voltage variable output type shunt regulator IC. Since the output voltage is adjustable from approximately 1.26 V to 15 V, it is suitable for a power supply of small-sized 3 V-system portable equipment. Also, it contributes to the miniaturization of set equipment by the adoption of the small type surface mounting package. 0.65 0.15 s Overview 0.40 1.45 3 + 0.10 - 0.05 Unit: mm 0.16 + 0.10 - 0.06 1.50 + 0.25 - 0.05 2.80 + 0.20 - 0.30 1 0.95 2 0.65 0.15 0.95 s Features * High precision reference voltage: 1.26 V (allowance: 2%) * Low voltage operation: 1.26 V to 15 V * Small type surface mounting package 1.90 0.20 + 2.90 - 0.20 0.05 10 s Applications * Portable telephone, PHS, office automation equipment, and other small-sized portable equipment MINI-3D s Block Diagram K Constant current source 1 Error amplifier Reference voltage Output transistor Ref. A 3 2 + 0.20 0 to 0.1 1.10 - 0.10 0.30 1.10 + 0.10 - 5 0.40 0.20 1 AN1432MS s Pin Descriptions Pin No. 1 Symbol Reference Description Voltage Regulators The reference voltage (1.26 V typical) pin. Although the impedance is high under the normal using conditions, be careful that the impedance drops and current flows into the IC inside if a current or voltage is forced to apply from the outside. The pin for the combined use of the power source current supply of IC and the constant voltage output as the shunt regulator. An excessive current supplied to this pin is bypassed to the anode pin through the output transistor. The constant voltage reference pin of the shunt regulator and flows out the current from the cathode and reference. Usually grounded. 2 Cathode 3 Anode s Absolute Maximum Ratings Parameter Supply voltage Reference voltage Supply current Reference current Cathode anode reverse current Cathode reference reverse current Power dissipation *2 *1 Symbol VK VREF IK IREF -IKA -IKR PD Topr Tstg Rating 15 7 20 50 -10 -10 104 -30 to +85 -55 to +150 Unit V V mA A mA mA mW C C Operating ambient temperature Storage temperature *1 Note) 1. Do not apply external currents or voltages to any pins not specifically mentioned. For circuit currents, '+' denotes current flowing into the IC, and '-' denotes current flowing out of the IC. 2. *1: Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25C. *2: The value at Ta = 85C. s Recommended Operating Range Parameter Supply voltage Symbol VCC Range VREF to 15 Unit V s Electrical Characteristics at Ta = 25C Parameter Reference voltage Reference voltage fluctuation 1 Reference voltage fluctuation 2 Reference input current Minimum cathode current Off time cathode current Dynamic impedance Symbol VREF VREF /VKA VREF /VKA IREF IK min IK OFF ZKA Conditions VKA = VREF , IK = 10 mA VREF VKA 5 V, IK = 10 mA 5 V VKA 15 V, IK = 10 mA RI = 10 k, IK = 10 mA VKA = VREF VKA = 15 V, VREF = 0 V VKA = VREF , f 1 kHz, IK = 1 mA to 10 mA Min 1.235 Typ 1.26 1.9 1.0 2.5 290 0.1 Max 1.285 3.5 2.0 4.4 350 1.0 0.5 Unit V mV/V mV/V A A A 2 Voltage Regulators s Electrical Characteristics at Ta = 25C (continued) * Design reference data Note) The characteristics listed below are theoretical values based on the IC design and are not guaranteed. AN1432MS Parameter Reference voltage change with temperature Reference input current change with temperature Symbol VREF /Ta IREF /Ta Conditions VKA = VREF , IKA = 10 mA 0 C Ta +70 C R1 =10 k, IK = 10 mA 0 C Ta +70 C Reference value 3 0.4 Unit mV A s Application Notes * PD Ta curves of mini-type 3-pin package PD T a 200 175 Independent IC Rth(j-a) = 625C/W PD = 200 mW (25C) Power dissipation PD (mW) 150 125 104 100 75 50 25 0 0 25 50 75 85 100 125 150 Ambient temperature Ta (C) s Application Circuit Example This circuit amplifies the error voltage of the secondary side output voltage in the insulation type switching power supply, then transfer it to the primary side via a photocoupler. Replaceable with the conventional product (AN1431M/AN1431T). (Primary side) (Secondary side) VOUT AN1432 Primary side to control IC 3 |
Price & Availability of AN1432
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |