|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TDA8160 INFRARED REMOTE CONTROL RECEIVER . . . . . . . LOW SUPPLY VOLTAGE (VS = 5V) LOW CURRENT CONSUMPTION (IS = 6mA) INTERNAL 5.5 V SHUNT REGULATOR PHOTODIODE DIRECTLY COUPLED WITH THE I.C. INPUT STAGE WITH GOOD REJECTION AT LOW FREQUENCY LARGE INPUT DYNAMIC RANGE FEW EXTERNAL COMPONENTS DIP8 (Plastic Package) ORDER CODE : TDA 8160 PIN CONNECTIONS DESCRIPTION The TDA8160 is a monolithic integrated circuit in-lead minidip plastic package specially designed to amplify the infrared signals in remote controlled TV, Radio or VCR sets. It can be used in flash transmission mode in conjunction with dedicated remote control circuits (for example : M491-494). BLOCK DIAGRAM PEAK DETECTOR DECOUPLING GROUND INPUT 8160-01.EPS OUTPUT OPEN SUPPLY VOLTAGE D1 DC BIAS 1 2 3 4 8 7 6 5 August 1992 1/4 8160-02.EPS TDA8160 ABSOLUTE MAXIMUM RATINGS 8160-01.TBL 8160-03.EPS 8160-03.TBL 8160-02.TBL Symbol Vs Tstg-j Ptot Parameter Supply Voltage Storage and Junction Temperature Total Power Dissipation at Tamb = 70 C Value 16 - 40, +150 400 Unit V C mW THERMAL DATA Symbol R th (j-a) Parameter Thermal Resistance Junction-ambient Max Value 200 Unit C/W ELECTRICAL CHARACTERISTICS (Refer to the test circuit ; VS = 5V, fO = 10kHz, Tamb = 25oC, unless otherwise specified) Symbol VS IS V3 GV 1st gm 2nd VIN IIN R IN LfR N Parameter Supply Voltage Supply Current (Pin 3) Stabilized Voltage at Pin 3 Voltage Gain (1st stage) Transconductance (2nd stage) Input Voltage Sensitivity (Pin 5) Input Current Sensitivity (Pin 5) Input Impedance Low Frequency Rejection at the Input Stage Noise Signal at Pin 7 Test Conditions Applied between Pins 3 and 6 I3 = 8mA Min. 4 Typ. 5 6 5.5 28 15 2 10 200 30 200 Max. 5.25 Unit V mA V dB mA/V mVP nAP k dB mVPP For Full Swing at the Output Pin 1 Rgen = 600 For Full Swing at the Output Pin 1 C1 = 100pF , f = 100HZ C4 Missing CIRCUIT DESCRIPTION (see the block diagram) The infrared light received from D1 generates an AC signal that comes in to the device at pin 5. The capacitor C1 and the integrated 10k resistor (pin 4) filter out the low frequency noise. TEST CIRCUIT The first stage shows a voltage gain of about 28dB ; the second stage is a voltage to current converter of 50mA/V (R2 = Zero). A sensitive peak detector detects the amplifier signal ; one open collector output (pin 1) gives out the recovered pulses. 2/4 TDA8160 Figure 1 : Recommended Application Circuit for the Drive of the IC M491 by Means of a Flash Mode IR. Transmitter only, in a TV 16 Station Memory Remote Control Subsystem. The Above Shown IR Receiver Application must be Housed Inside a Metal Can Shield. 3/4 8160-04.TIF TDA8160 PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIP e4 A a1 L I b1 B b e3 B1 e Z E Z D 8 5 F 1 4 Dimensions A a1 B b b1 D E e e3 e4 F i L Z Min. 0.51 1.15 0.356 0.204 7.95 Millimeters Typ. 3.32 Max. Min. 0.020 0.045 0.014 0.008 0.313 Inches Typ. 0.131 Max. 1.65 0.55 0.304 10.92 9.75 2.54 7.62 7.62 6.6 5.08 3.81 1.52 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No licence is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without noti ce. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved Purchase of I2C Components of SGS-THOMSON Microelectronics, conveys a license under the Philips I2C Patent. Rights to use these components in a I2C system, is granted provided that the system confo rms to the I2C Standard Specifications as defined by Philips. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 4/4 DIP8.TBL 3.18 0.125 PM-DIP8.EPS |
Price & Availability of TDA8160 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |