Part Number Hot Search : 
E001352 107M00 FFB222 DS142 AC1586 SPT5420 SI4133 UPD17
Product Description
Full Text Search
 

To Download AN2516S Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AN2516S
Electronic View-Finder Driving IC with Character Input
s Overview
The AN2516S is a drive IC for an electronic monochrome view-finder of a video camera. The AN2516S has all the functions of the AN2515S except HD and VD output, and has attached -correction (which compensates luminance characteristics). It is easy to make up a 0.5-inch electronic view-finder with minimal external components.
0.40.25 1.3 Unit:mm
* Built-in video amplifier, synchronous signal separa tion, horizontal vertical oscillator, AFC, correction, character mixing, and vertical driver circuits. * Direct drive of a vertical deflection coil available * Built-in capacitor for vertical synchronous signal separation
0.3 5.40.3 7.70.3
18-Pin SOP Package (SOP018-P-0300)
s Block Diagrams
VCC=5.0V
47KVR
0.015F
24k
Video Intput 470 470 Video Output 47F
130k
510k
18
17
16
15
14
1F
13
12
11
10
H.OSC
Phase Comp.
+6dB Amp.
Sync. Sepa.
V.Sync. Sepa.
C-Mix.
V*Defcoil Drive
V. OSC
1
2 39
3
4 3.9
220VR
5
6 33k
7
8 0.1F
9
0.15 0.65
1.50.2
s Features
0.10.1
1.27
12.60.3
s Absolute Maximum Ratings (Ta=25C)
Parameter Supply voltage Supply current Power dissipation Note 2) Operating ambient temperature Note 1) Storage temperature Note 1) Symbol VCC
ICC
Rating 5.5 47 190 -20 to +75 -55 to +125
Unit V mA mW C C
PD Topr Tstg
Note 1) Ta=25C except operating ambient temperature and storage temperatures unless otherwise specified. Note 2) Allowable power dissipation of the package at Ta=70C.
s Recommended Operating Range (Ta=25C)
Parameter Operating supply voltage range Symbol VCC Range 4.5V to 5.3V
s Electrical Characteristics (VCC=5V, Ta=252C)
Parameter Supply current (1) Supply current (2) Video amp. gain (1) Video amp. gain (2) Synchronous separating capability (1) Synchronous separating capability (2) Video signal HD width AFC output HD width Horizontal free oscillation freq. AFC loop gain Control sensitivity Vertical separation time Video signal HD width Vertical free-oscillation freq. Vertical deflection output amplitude (1) Vertical deflection output amplitude (2) Vertical deflection output dynamic range (1) Vertical deflection output dynamic range (2) Character-Black level Character-White level Vertical deflection output min. drive capability Symbol I2 I14 GV1 GV2 HSEP1 HSEP2 Hout AFCHD fHfree fAFC TVSEP VOUT fVfree VVDEF1 VVDEF2 DRVDEF1 DRVDEF2 CBL CWL V3-4 7.0 9.5 14.25 15.25 840 8 1.1 45 1.3 1.3 2.0 2.0 0.15 0.65 0.65 8.0 10.5 15.75 15.75 960 16 1.3 49 1.6 1.6 2.4 2.4 0.20 0.85 Condition min 2.35 5.5 10.5 4.3 0.2 1.3 9.0 11.5 17.25 16.25 1080 24 1.5 53 1.9 1.9 2.8 2.8 0.25 1.05 V typ 7.5 10.0 11.5 5.3 max 13.0 14.0 12.5 6.3 Unit Note mA at no-load mA at no-load dB dB V V s s kHz kHz Hz/A s ms Hz V V V V
s Pin Descriptions
Pin No. 1 2 3 4 5 6 7 8 9 Pin name Vertical size control input Power supply input Vertical deflection coil driver output (1) GND N. C. Vertical deflection coil driver output (2) Vertical oscillation resistor pin Vertical oscillation capacitor pin Character-level control Pin No. Pin name 10 Character input 11 Gamma control 12 GND 13 Video input 14 Power supply input 15 Video amplifier output 16 Phase comparator output 17 Horizontal oscillation resistor pin 18 Horizontal AFC output
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR


▲Up To Search▲   

 
Price & Availability of AN2516S

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X