|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MITSUMI Hybrid Driver Monolithic IC MM1285 Hybrid Driver Monolithic IC MM1285 Outline This IC collects various driver functions used in pagers and other portable communication devices in a single chip. Recently there have been requests for more compact pagers and portable telephones, and at the same time new functions and features are being added, leading to a strong demand for miniaturized and hybrid components. This IC meets these needs through adoption of a miniature package. The speaker driver incorporates functions for varying audio volume through data, a feature which can be used in novel applications. Features 1. 2. 3. 4. Configuration: Speaker driver,vibration motor driver, two LED drivers The speaker driver is capable of varying the audio volume in four steps via parallel data Power can be supplied by a single dry-cell battery Low 0.1A consumption current in standby mode Package TSOP-16A (MM1285XV) Absolute Maximum Ratings Item Storage temperature Operating temperature Power supply voltage Operating power supply voltage OUT1~4 Voltage applied to output pin OUT5 Pd Symbol TSTG TOPR VCC max. Vccop Ratings -40~+125 -10~+50 -0.3~+6 +1.0~+1.7 -0.3~+15 -0.3~+5 -0.3~+5 300 Units C C V V V V V mW Voltage applied to input pin Allowable loss MITSUMI Hybrid Driver Monolithic IC MM1285 Pin Assignment 1 2 16 15 14 13 12 11 10 9 3 4 5 12345678 6 7 8 VCC I1 I2 I3 I4 S1 S2 I5 9 10 11 12 13 14 15 16 O5 O4 GND O3 O2 O1 KATHODE ANODE I/O Timing Chart LED1 LED2 Vibrator Input Output Input Output Input Output Input SW1 SW2 Output Speaker Application Circuits MITSUMI Hybrid Driver Monolithic IC MM1285 Electrical Characteristics Item Standby current (Except where noted otherwise, Ta=25C, VCC=1.5V) Measurement conditions All input pins=0V I1=H, another pin=L I2=H, another pin=L I3=H, another pin=L I4=H, S1=H, S2=H, another pin=L I4=H, S1=H, S2=H, another pin=L I4=H, S1=H, S2=H, another pin=L I4=H, S1=H, S2=H, another pin=L All input pins 2*3*4*5*6*7 PIN I5pin (8PIN) only 2*3*4*5*6*7 PIN, VIN=3V I5pin (8PIN) only, VIN=3V IO=20mA IO=20mA IO=180mA IO=100mA, S1=H, S2=H IO=50mA, S1=L, S2=H IO=5mA, S1=H, S2=L IO=1mA, S1=L, S2=L V (I5) =1.5V, V (O5) =0.5V V (I5) =0V, V (O5) =5V V(I5)=0.85V, pulled up to 2V by 1M I1=L I1=H I2=L I2=H I3=L I3=H I4=L I4=H H L H L H L 7 38.5 154 2 8.3 170 Min. Typ. Max. Units 1.4 1.4 7.0 7.0 3.5 1.1 0.45 0.40 2.2 2.2 11.0 11.0 5.5 1.6 0.70 0.65 0.1 2.9 2.9 14.5 14.5 8.0 2.2 0.95 0.85 A mA mA mA mA mA mA mA V 16 330 10 10 1.5 1.5 13 71.5 280 0.1 0.05 A A mA A V S S S S S S S S 0.75 10 V A Consumption current A (O1 pin ON) Consumption current B (O2 pin ON) Consumption current C (O3 pin ON) Consumption current D (O4 pin ON) Consumption current E (O4 pin ON) Consumption current F (O4 pin ON) Consumption current G (O4 pin ON) Input threshold Input resistance value *220k *10k 11 230 5 5 1 1 10 55 220 10 - Input current Output resistance (O1 pin) Output resistance (O2 pin) Output resistance (O3 pin) Output resistance A (O4 pin) Output resistance B (O4 pin) Output resistance C (O4 pin) Output resistance D (O4 pin) Output current (O5 pin) O5 pin acquisition current O5 pin voltage ON transport delay time A OFF transport delay time A ON transport delay time B OFF transport delay time B ON transport delay time C OFF transport delay time C ON transport delay time D OFF transport delay time D Diode forward voltage Diode reverse leakage voltage H, S1=H, S2=H L, S1=H, S2=H IF=3mA VR=5.5V 0.65 *0.3 *0.9 *0.3 *0.9 *0.3 *1.4 *0.5 *1.0 0.70 Notes.1: Asterisks ( ) indicate design values. 2: Voltages applied to input pins are to be H=1V, L=0V. * |
Price & Availability of MM1285 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |