 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by H11AA1/D GlobalOptoisolatorTM 6-Pin DIP Optoisolators AC Input/Transistor Output The H11AA1, H11AA2, H11AA3, H11AA4 devices consist of two gallium- arsenide infrared emitting diodes connected in inverse parallel, optically coupled to a monolithic silicon phototransistor detector. * Built-In Protection for Reverse Polarity * Guaranteed CTR Minimum Values as High as 100% * Guaranteed Minimum/Maximum Symmetry Limits * To order devices that are tested and marked per VDE 0884 requirements, the suffix "V" must be included at end of part number. VDE 0884 is a test option. Applications * Detecting or Monitoring ac Signals * AC Line/Digital Logic Isolation * Programmable Controllers * Interfacing and coupling systems of different potentials and impedances * AC/DC -- Input Modules MAXIMUM RATINGS (TA = 25C unless otherwise noted) Rating INPUT LED Forward Current -- Continuous (RMS) LED Power Dissipation @ TA = 25C with Negligible Power in Output Detector Derate above 25C OUTPUT TRANSISTOR Collector-Emitter Voltage Emitter-Base Voltage Collector-Base Voltage Collector Current -- Continuous Detector Power Dissipation @ TA = 25C with Negligible Power in Input LEDs Derate above 25C TOTAL DEVICE Isolation Surge Voltage(1) (Peak ac Voltage, 60 Hz, 1 sec Duration) Total Device Power Dissipation @ TA = 25C Derate above 25C Ambient Operating Temperature Range(2) Storage Temperature Range(2) Soldering Temperature (10 sec, 1/16 from case) VISO PD TA Tstg TL 7500 250 2.94 - 55 to +100 - 55 to +150 260 Vac(pk) mW mW/C C C C VCEO VEBO VCBO IC PD 30 5 70 150 150 1.76 Volts Volts Volts mA mW mW/C IF PD 60 120 1.41 mA mW mW/C 1 2 3 Symbol Value Unit H11AA1* H11AA2 H11AA3 H11AA4* [CTR = 20% Min] [CTR = 10% Min] [CTR = 50% Min] [CTR = 100% Min] *Motorola Preferred Devices STYLE 8 PLASTIC 6 1 STANDARD THRU HOLE CASE 730A-04 SCHEMATIC 6 5 4 NC INPUT LED INPUT LED NO CONNECTION EMITTER COLLECTOR BASE PIN 1. 2. 3. 4. 5. 6. 1. Isolation surge voltage is an internal device dielectric breakdown rating. 1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. 2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. Preferred devices are Motorola recommended choices for future use and best overall value. GlobalOptoisolator is a trademark of Motorola, Inc. REV 1 (c)MotorolaInc. 1995 Motorola, Optoelectronics Device Data 1 H11AA1 H11AA2 H11AA3 H11AA4 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)(1) Characteristic INPUT LED Forward Voltage (IF = 10 mA, either direction) TA = -55C TA = 100C Capacitance (V = 0 V, f = 1 MHz) OUTPUT TRANSISTOR Collector-Emitter Dark Current (VCE = 10 V) TA = 100C Collector-Base Dark Current (VCB = 10 V) Collector-Emitter Breakdown Voltage (IC = 10 mA) Collector-Base Breakdown Voltage (IC = 100 A) Emitter-Collector Breakdown Voltage (IE = 100 A) DC Current Gain (IC = 2 mA, VCE = 5 V) (Typical Value) Collector-Emitter Capacitance (f = 1 MHz, VCE = 0 V) Collector-Base Capacitance (f = 1 MHz, VCB = 0 V) Emitter-Base Capacitance (f = 1 MHz, VEB = 0 V) COUPLED Output Collector Current (IF = mA, VCE = 10 V) H11AA1,3,4 H11AA2 All devices ICEO -- -- -- -- 30 70 5 -- -- -- -- 1 1 1 0.2 45 100 7.8 500 1.7 20 10 100 200 -- -- -- -- -- -- -- -- -- nA nA A nA Volts Volts Volts -- pF pF pF H11AA1,3,4 H11AA2 All devices All devices VF -- -- -- -- -- 1.15 1.15 1.3 1.05 20 1.5 1.8 -- -- -- Volts Symbol Min Typ(1) Max Unit CJ pF ICBO V(BR)CEO V(BR)CBO V(BR)ECO hFE CCE CCB CEB IC (CTR)(2) "10 H11AA1 H11AA2 H11AA3 H11AA4 H11AA1,3,4 2 (20) 1 (10) 5 (50) 10 (100) 0.33 5 (50) 2 (20) 10 (100) 15 (150) -- -- -- -- -- 3 mA (%) Output Collector Current Symmetry(3) I at I + ) 10 mA, VCE + 10 V F C I at I + -10 mA, V + 10 V F C CE -- -- Collector-Emitter Saturation Voltage (IC = 0.5 mA, IF = Isolation Voltage (f = 60 Hz, t = 1 sec)(4) Isolation Resistance (V = 500 V)(4) Isolation Capacitance (V = 0 V, f = 1 MHz)(4) 1. 2. 3. 4. "10 mA) VCE(sat) VISO RISO CISO -- 7500 1011 -- 0.1 -- -- 0.2 0.4 -- -- -- Volts Vac(pk) pF Always design to the specified minimum/maximum electrical limits (where applicable). Current Transfer Ratio (CTR) = IC/IF x 100%. This specification guarantees that the higher of the two IC readings will be no more than 3 times the lower at IF = 10 mA. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. 2 Motorola Optoelectronics Device Data H11AA1 H11AA2 H11AA3 H11AA4 TYPICAL CHARACTERISTICS 2.4 Vin, INPUT VOLTAGE (VOLTS) 1.6 0.8 0 -0.8 -1.6 -2.4 -1000 PULSE ONLY PULSE OR DC INPUT CURRENT WAVEFORM MAXIMUM PEAK OUTPUT CURRENT (1) MINIMUM PEAK OUTPUT CURRENT (1) -600 -200 0 200 600 iF, INSTANANEOUS INPUT CURRENT (mA) 1000 Figure 1. Input Voltage versus Input Current I C , OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 7 5 2 1 0.7 0.5 0.2 0.1 Figure 2. Output Characteristics 28 IC , COLLECTOR CURRENT (mA) 24 20 16 5 mA 12 8 4 0 0 1 2 3 4 5 6 7 8 9 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 10 2 mA 1 mA IF = 10 mA NORMALIZED TO TA = 25C -60 -40 -20 0 20 40 60 80 TA, AMBIENT TEMPERATURE (C) 100 Figure 3. Collector Current versus Collector-Emitter Voltage ICEO, COLLECTOR-EMITTER DARK CURRENT (NORMALIZED) Figure 4. Output Current versus Ambient Temperature C, CAPACITANCE (pF) 100 NORMALIZED TO: VCE = 10 V TA = 25C 22 20 18 16 14 12 10 8 6 4 2 CCE 0 0.01 CEB CCB f = 1 MHz 10 VCE = 30 V 1 10 V 0 20 40 60 80 TA, AMBIENT TEMPERATURE (C) 100 CLED 0.1 0.1 1 V, VOLTAGE (VOLTS) 10 100 Figure 5. Dark Current versus Ambient Temperature Figure 6. Capacitances versus Voltage Motorola Optoelectronics Device Data 3 H11AA1 H11AA2 H11AA3 H11AA4 PACKAGE DIMENSIONS -A- 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. DIM A B C D E F G J K L M N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.300 BSC 0_ 15 _ 0.015 0.100 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 7.62 BSC 0_ 15 _ 0.38 2.54 -B- 1 3 F 4 PL N C L -T- SEATING PLANE K G J 6 PL 0.13 (0.005) TA M M E 6 PL D 6 PL 0.13 (0.005) M M TB M A M B M STYLE 8: PIN 1. 2. 3. 4. 5. 6. LED 1 ANODE/LED 2 CATHODE LED 1 CATHODE/LED 2 ANODE NC EMITTER COLLECTOR BASE CASE 730A-04 ISSUE G -A- 6 1 4 -B- 3 S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.020 0.025 0.008 0.012 0.006 0.035 0.320 BSC 0.332 0.390 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.51 0.63 0.20 0.30 0.16 0.88 8.13 BSC 8.43 9.90 F 4 PL H C L -T- G E 6 PL D 6 PL 0.13 (0.005) M J K 6 PL 0.13 (0.005) TA M M SEATING PLANE TB M A M B M DIM A B C D E F G H J K L S CASE 730C-04 ISSUE D *Consult factory for leadform option availability 4 Motorola Optoelectronics Device Data H11AA1 H11AA2 H11AA3 H11AA4 -A- 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. DIM A B C D E F G J K L N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.400 0.425 0.015 0.040 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 10.16 10.80 0.38 1.02 -B- 1 3 F 4 PL N C L -T- SEATING PLANE G D 6 PL K 0.13 (0.005) M J TA M E 6 PL B M *Consult factory for leadform option availability CASE 730D-05 ISSUE D Motorola Optoelectronics Device Data 5 H11AA1 H11AA2 H11AA3 H11AA4 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 6 *H11AA1/D* Motorola Optoelectronics Device Data H11AA1/D |
Price & Availability of H11AA2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |