|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FUJITSU SEMICONDUCTOR DATA SHEET DS04-28829-2E ASSP For Screen Display Control CMOS On-Screen Display Controller MB90050 DESCRIPTION The MB90050 is an on-screen display controller for displaying text and graphics on the TV screen. The MB90050 controls a display area of 35 characters by 16 lines, and provides each character composed of 24 x 32 dots at most. The display functions include a wealth of characters with qualifying functions such as character background shading (shadow casting) , sprite character functions and graphic character functions, contributing to the use of control GUI displays. The MB90050 incorporates display memory (VRAM) , character font ROM, and sync signal generation circuit and video signal generation circuit supporting the NTSC and PAL systems, allowing text and graphics to be displayed in conjunction with a small number of external components. FEATURES * Main screen display capacity 35 characters x 16 lines (maximum 560 characters) * Character configuration Normal characters : 24 x 32 dots Graphic characters : 12 x 16 dots* (colorable per 1 dot) (Continued) PACKAGE 48-pin plastic QFP (FPT-48P-M15) MB90050 * Font display configuration Three horizontal width settings (selectable setting L/M/S for each character) per character. L size : 24 dots M size : 18 dots S size : 12 dots Two vertical height settings (selectable A/B for each line) per line. A : 18 to 32 dots (setting per 2 dots) B : 18 to 32 dots (setting per 2 dots) (These sizes are dot sizes of typical character. Each size of graphic characters uses half the number of dots of typical characters. Note, however, that both of the typical and graphic characters are the same in character area size.) * Character types Usable all 512 character types (font ROM+, font RAM) Font ROM : 512 character types (all area user setting) Font RAM : 8 character types (all area user command setting) Capable of setting a specific eight-character area in font ROM so that the area is replaced with font RAM. * Display modes Character : Normal character/graphic character (set for each character) Character trimming : Side trimming 1/side trimming 2/patern background 1/patern background 2 (set for each screen) Character background : None/Solid-fill/Shaded background (concave) /Shaded background (convex) (set for each character) Line background : None/Solid-fill/Shaded background (concave) /Shaded background (convex) (set for each line) Character enlargement : Normal, Double width, Double height, Double width x double height (set for each line) Brink : OFF/ON (set for each character) * Main screen display position control Horizontal display position : Control in 2-dot units (movable through the entire screen) Vertical display position : Control in 2-dot units (movable through the entire screen) Line spacing control : 0 to 14 dots, 2-dot units (set for each line) Sprite character display control Capable of displaying one block for an arbitrary character on the topmost layer on the screen. Sprite character display : OFF/ON (graphic character display) Sprite character types : 256 types (character codes 000H to 0FFH) Sprite character configuration : 1 character/2 characters horizontal/2 characters vertical/ 2x2 characters Sprite character horizontal display position : Control in 1-dot units Sprite character vertical display position : Control in 1-dot units Screen background color display control Capable of displaying an arbitrary color on the entire bottommost layer on the screen. Screen background color display : OFF/ON * Display colors Digital output : 16 colors selectable from among 64 colors (built in palette circuit) Video output : Any 16 colors selectable (Command setting enable) (Continued) 2 MB90050 (Continued) * Display colors and setting units Character color : 16 colors (set for each character) Character background color : 16 colors (set for each character) Character trimming color : 16 colors (set for each line) Line background color : 16 colors (set for each line) Graphic character color : 16 colors (set for each dot) Sprite character color : 16 colors (set for each dot) Screen background character color : 16 colors (set for each dot) Screen background color : 16 colors (set for all screen) Shaded background frame highlight color : 16 colors (set for all screen) Shaded background frame shadow color : 16 colors (set for all screen) * Digital display signal output Color signal output : DCOL5 to DCOL0 pins (6 bits) Display period signal output : DB pin Translucent display period signal output : DH pin * Analog (video) signal input/output Composit video input/output : VIN, VOUT pins Y/C video input/output : YIN, YOUT pins, CIN, COUT pins * Internal sync control Internal sync signal generator and video signal generator supporting the NTSC and PAL systems. * External interface 16-bit serial input (3-signal input) Chip select signal Serial clock signal Serial data signal * Package QFP-48P (FPT-48P-M15) * Supply voltage +5 V10% * : 1 dot of graphic characters is the same size as 2 x 2 dots of normal characters. 3 MB90050 PIN ASSIGNMENT (TOP VIEW) TESTI2 TESTI1 37 COUT AVCC2 YOUT AVSS2 AVCC1 39 VOUT AVSS1 CIN 48 47 46 YIN 45 44 43 42 41 40 38 VIN FLDI VSYNCI HSYNCI VCC VSS EXS XS FSC4O VSYNCO HSYNCO CSYNCO VBLKO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 36 35 34 33 PO3 PO2 DCOL5 DCOL4 DCOL3 DCOL2 DCOL1 DCOL0 DCLKO DB DH RESET MB90050 32 31 30 29 28 27 26 25 SYNCST SCLK BUSY FLDO EXD VCC CS SIN XD VSS PO0 (FPT-48P-M15) 4 PO1 MB90050 PIN DESCRIPTIONS Circuit Pin Pin name I/O type no. 6, 7 20, 19 15 16 17 EXS, XS EXD, XD CS SCLK SIN I/O A Function Crystal oscillation circuit pins for color burst clock generator. Connect an external crystal oscillator (14.31818 MHz for NTSC or 17.734475 MHz for PAL) and load capacitance (C) to these pins to form a crystal oscillation circuit. LC oscillation circuit pins for display dot clock generator. Connect these pins to external "L" and "C" to from an LC oscillation circuit. Chip select signal input pin. For serial command transfer, set this pin to the Low level. Serial clock signal input pin. This pin feeds a clock signal upon transfer of a serial command. It feeds serial data at the rising edge. Serial data signal input pin. Input data during serial command transfer. Busy signal output pin. This pin outputs a significant level signal during VRAM filling. Do not input a serial command while the pin outputs the significant level signal. Supplying a low level signal to the CS pin during the significant level signal output period terminates the VRAM fill operation and causes this pin to output an insignificant level signal. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs a low level signal, this pin outputs the busy signal, turns off the internal pull-up resistor, and sets the output to OFF (output tied to the low). Vertical sync signal input pin. Active low signal or active high signal input is command-selectable for the pin. When the RESET pin inputs the low level signal, this pin inputs the active low signal. Horizontal sync signal input pin. Active low signal or active high signal input is command-selectable for the pin. When the RESET pin inputs the low level signal, this pin inputs the active low, horizontal sync signal. Field signal input pin. The internal field signal identically detected from among input sync signals or the input signal to this pin is command-selectable for field control. During operation under external synchronization control, the input signal is used to control the least significant bit of the font ROM/RAM raster address. The input signal to this pin is disabled during operation under internal synchronization control. (Continued) I/O I I I B C C C 18 BUSY O F 2 VSYNCI I D 3 HSYNCI I D 1 FLDI I D 5 MB90050 Pin no. Pin name I/O Circuit type Function Vertical sync signal output pin. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs the low level signal, this pin turns off the internal pull-up resistor and sets the output to OFF (output tied to the high). Horizontal sync signal output pin. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs the low level signal, this pin turns off the internal pull-up resistor and sets the output to OFF (output tied to the high). Composite sync signal output pin. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs the low level signal, this pin turns off the internal pull-up resistor and sets the output to OFF (output tied to the high). Vertical blanking interval (VBI) output pin. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs the low level signal, this pin turns off the internal pull-up resistor and sets the output to OFF (output tied to the low). Field signal output pin. During operation under internal synchronization control, this pin outputs the internally generated field signal. During operation under external synchronization control, the pin outputs the field signal (internally detected field signal or external input field signal) used for internal operations. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs the low level signal, this pin turns off the internal pull-up resistor and sets the output to OFF (output tied to the low). Synchronization detection signal output pin. This pin outputs a significant level signal with a sync signal detected and an insignificant level signal with no sync signal detected. The pin enables output (ON/OFF) control, output logic control, and internal pullup ON/OFF control depending on the command setting. When the RESET pin inputs the low level signal, this pin turns off the internal pull-up resistor and sets the output to OFF (output tied to the low). (Continued) 9 VSYNCO O F 10 HSYNCO O F 11 CSYNCO O F 12 VBLKO O F 13 FLDO O F 14 SYNCST O F 6 MB90050 Pin no. Pin name I/O Circuit type Function Dot clock signal output pin. This pin outputs an LC oscillation clock signal. The pin enables output (ON/OFF) control depending on the command setting. The normal clock (that stops oscillation during horizontal synchronization) or continuous clock (that does not stop oscillation during horizontal synchronization*) can be command-selected for the output using the command setting for output selection control (CKS). When the TESTI2 pin inputs a low level signal, this pin outputs the continuous clock signal that does not stop oscillation during horizontal synchronization (where the output selection control (CKS) setting is disabled). When the RESET pin inputs the low level signal, the pin outputs a dot clock signal. * : For continuous clock, this pin is used for frequency measurement. To measure the dot clock, the pin sets display signal output that is not the standard and cannot display correctly. Crystal oscillator 4FSC clock signal output pin. This pin enables output (ON/OFF) control depending on the command setting. The crystal oscillation clock (4FSC) or its 1/4 frequency clock (FSC) can be command-selected for the output using the command setting for output selection control (FSS). When the TESTI2 pin inputs the low level signal, this pin outputs the 4FSC clock signal (where the output selection control (FSS) setting is disabled). When the RESET pin inputs the low level signal, this pin outputs the 4FSC clock signal. Halftone display period signal output pin. This pin enables output (ON/OFF) control and output logic control depending on the command setting. When the RESET pin inputs the low level signal, this pin sets the output to OFF (output tied to the low). (The input feature of the pin is a test function. Use the pin usually only for output.) Display period signal output pin. This pin enables output (ON/OFF) control and output logic control depending on the command setting. When the RESET pin inputs the low level signal, this pin sets the output to OFF (entering the low level signal fixed output state). (The input feature of the pin is a test function. Use the pin usually only for output.) Display color signal output pin. This pin enables output (ON/OFF) control and output logic control depending on the command setting. When the RESET pin inputs the low level signal, this pin sets the output to OFF (entering the low level signal fixed output state). (The input feature of the pin is a test function. Use the pin usually only for output.) Port signal output pin. This pin enables output level (High/Low) control depending on the command setting. When the RESET pin inputs the low level signal, this pin sets the output to OFF (entering the low level signal fixed output state). (The input feature of the pin is a test function. Use the pin usually only for output.) (Continued) 28 DCLKO O G 8 FSC4O O G 26 DH O (I) H 27 DB O (I) H 34, 33, 32, 31, 30, 29 36, 35, 24, 23 DCOL5, DCOL4, DCOL3, O (I) DCOL2, DCOL1, DCOL0 PO3, PO2, PO1, PO0 H O (I) H 7 MB90050 (Continued) Pin no. Pin name I/O Circuit type Function Reset signal input pin. Upon input of the low level signal, this pin causes an internal reset. After the power supply is inserted, the reset input is required for normal operation. During regular operation, the pin inputs the high level signal. Test signal input pin. Input High level signal during normal operation. (Input of the Low level signal activates test mode operation.) Test signal input pin. Input High level signal during normal operation. Composite video signal input pin. This pin inputs a DC-reproduced signal of 2 VP-P (pedestal level 1.57 V, sync tip level 1 V) . Luminance video signal (Y video signal) input pin. This pin inputs a DC-reproduced signal of 2 VP-P (pedestal level 1.57 V, sync tip level 1 V) . Saturation video signal (C video signal) input pin. This pin inputs a signal at 1.57 VDC and a color burst signal amplitude of 0.57 VP-P. Composite video signal output pin. This pin outputs a signal of 2 VP-P (pedestal level 1.57 V, sync tip level 1 V) . When the RESET signal inputs the low level signal, this pin outputs the black video (pedestal level without color burst) signal. Luminance video signal (Y video signal) output pin. This pin outputs a signal of 2 VP-P (pedestal level 1.57 V, sync tip level 1 V) . When the RESET pin inputs the low level signal, this pin outputs the black video (pedestal level) signal. Saturation video signal (C video signal) output pin. This pin outputs a signal at 1.57 VDC and a color burst signal amplitude of 0.57 VP-P. When the RESET pin inputs the low level signal, this pin outputs the black video signal (a DC voltage of 1.57 V without color burst). Power supply pin for digital circuit. These pins supply +5 V and make all VCC pins same potential. Digital ground pins. These pins make all VSS pins and AVSS1/AVSS2 pins same potential. Power supply pin for analog circuit and composite video signal Input/Output (VIN-VOUT) circuit. This pin supplies +5 V. Input analog ground level when not using this analog circuit. Power supply pin for analog circuit, luminance video signal Input/Output (YIN-YOUT) circuit, and saturation video signal Input/Output (CIN-COUT) circuit. This pin supplies +5 V. Input analog ground level when not using this analog circuit. Analog ground pins. AVSS1 pin makes AVSS2 pin same potential. VSS pins make these pins same potential. 25 RESET I C 37 47 38 TESTI1 TESTI2 VIN I I I E E I 46 YIN I I 44 CIN I I 40 VOUT O I 48 YOUT O I 42 COUT O I 4, 22 5, 21 39 VCC VSS AVCC1 43 AVCC2 41, 45 AVSS1, AVSS2 8 MB90050 I/O CIRCUIT TYPES Type Circuit Remarks * Crystal oscillation Oscillator feedback resistor (approx. 1M) EXS A XS TEST signal * LC oscillation EXD B XD STOP signal * TTL level, Hysteresis input C TTL * CMOS level, Hysteresis input D CMOS 5V * CMOS level, Hysteresis input with pull-up resistor (approx. 50 k) E CMOS (Continued) 9 MB90050 (Continued) Type Circuit Remarks * Nch open-drain output with pull-up resistor SW (approx. 50 k) Pull-up control signal 5V Pch F Nch * CMOS output 5V Pch G Nch 5V Pch * CMOS I/O Input is for test. H Nch TEST signal Input (TEST) * Analog I/O CMOS analog SW I Control signal 10 MB90050 BLOCK DIAGRAM SIN SCLK CS VIN YIN CIN HSYNCI VSYNCI FLDI SYNCST VOUT YOUT COUT Serial input control Each block Analog switch Sync control Video signal generator circuit HSYNCO DCOL5 to DCOL0 VSYNCO CSYNCO FLDO VBLKO NTSC/PAL signal generator circuit Output control Palette (4 bits6 bits) DB DH BUSY Display Memory control VRAM (35 characters x 16 lines) EXS XS FSC4O Font ROM (512 characters) Font RAM (8 characters) 4FSC clock oscillation circuit PO3 Each block Port control PO2 PO1 PO0 EXD XD DCLKO RESET Dot clock oscillation circuit Each block All reset 11 MB90050 ABSOLUTE MAXIMUM RATINGS Parameter Symbol VCC Power supply voltage* Input voltage*1 Output voltage*1 "L" level maximum output current "H" level maximum output current Power consumption Operating temperature Storage temperature 1 Rating Min VSS - 0.5 VSS - 0.5 VSS - 0.5 VSS - 0.5 VSS - 0.5 -40 -55 Max VSS + 7.0 VSS + 7.0 VSS + 7.0 VCC + 0.5 VCC + 0.5 15 -15 500 +85 +125 Unit V V V V V mA mA mW C C Remarks *2 *2 *2 AVCC1 AVCC2 VIN VOUT IOL IOH Pd Ta Tstg *1 : The parameter is based on VSS = AVSS1 = AVSS2 = 0 V. *2 : Do not make a potential difference between AVSS (AVSS1/AVSS2) pins and VSS pin. WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. 12 MB90050 RECOMMENDED OPERATING CONDITIONS (VSS = AVSS1 = AVSS2 = 0 V) Parameter Symbol VCC Power supply voltage AVCC1 AVCC2 VIH1 "H" level input voltage VIH1S VIH2S VIL1 "L" level input voltage VIL1S VIL2S Analog input voltage Operating temperature AVIN1 AVIN2 Ta Value Min 4.5 4.5 4.5 0.7 x VCC 0.8 x VCC 0.6 x VCC VSS - 0.3 VSS - 0.3 VSS - 0.3 0 0 -40 Max 5.5 5.5 5.5 VCC + 0.3 VCC + 0.3 VCC + 0.3 0.3 x VCC 0.2 x VCC 0.6 AVCC1 AVCC2 +85 Unit V V V V V V V V V V V C *1, *2 *1, *3 (H) (D, E) (C) (H) (D, E) (C) VIN pin YIN pin, CIN pin Remarks (circuit type) *1 : Do not make a potential difference between AVSS (AVSS1/AVSS2) pins and VSS pin. *2 : It is possible to set AVCC1 = AVSS (AVSS1/AVSS2) when not using composite video signal (VIN pin, VOUT pin) . *3 : It is possible to set AVCC2 = AVSS (AVSS1/AVSS2) when not using Y/C separated video signals (YIN pin, YOUT pin, CIN pin and COUT pin) . WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. 13 MB90050 ELECTRICAL CHARACTERISTICS 1. DC Characteristics (VSS = AVSS1 = AVSS2 = 0 V, Ta = -40 C to +85 C) Parameter "H" level output voltage "L" level output voltage Pull-up resistor Power supply current Symbol VOH VOL RP ICC Pin name All output pins All output pins E, F VCC Conditions VCC = 4.5 V, IOH = -4.0 mA VCC = 4.5 V, IOL = 4.0 mA VCC = 5.5 V VCC = 5.5 V, 4FSC = 20 MHz, fDC = 20 MHz VCC = AVCC1 = AVCC2 = 5.5 V, 4FSC = 0 MHz, AVIN1 = AVIN2 = 1.65 V, No load Value Min 4.0 25 Typ 50 35 Max 0.4 200 45 Unit V V k mA Analog power supply current IA AVCC1, AVCC2 22 40 mA ON resistor RON VIN-VOUT, VCC = AVCC1 = AVCC2 = 4.5 V, YIN-YOUT, IOL = 100 A CIN-COUT VIN, YIN, CIN VOUT, YOUT, COUT VCC = AVCC1 = AVCC2 = 5.5 V, AVIN1 = AVIN2 = 5.5 V VCC = AVCC1 = AVCC2 = 4.5 V, IOL = 100 A 215 310 OFF leak current IOFF 0.1 10 A Output resistor ROUT 100 1800 14 MB90050 Analog Ladder Voltage Symbol VOHR0 VOHR1 VOHR2 VOHR3 VOHR4 VOHR5 VOHR6 VOHR7 VOHR8 VOHR9 VOHR10 VOHR11 VOHR12 VOHR13 VOHR14 VOHR15 VOHR16 VOHR17 VOHR18 VOHR19 VOHR20 VOHR21 VOHR22 VOHR23 VOHR24 VOHR25 VOHR26 VOHR27 VOHR28 VOHR29 VOHR30 VOHR31 VOHR32 VOHR33 VOHR34 VOHR35 Parameter Resistance ladder voltage 00 (-40 IRE) Resistance ladder voltage 01 (-36 IRE) Resistance ladder voltage 02 (-32 IRE) Resistance ladder voltage 03 (-28 IRE) Resistance ladder voltage 04 (-24 IRE) Resistance ladder voltage 05 (-20 IRE) Resistance ladder voltage 06 (-16 IRE) Resistance ladder voltage 07 (-12 IRE) Resistance ladder voltage 08 (-8 IRE) Resistance ladder voltage 09 (-4 IRE) Resistance ladder voltage 10 (0 IRE) Resistance ladder voltage 11 (4 IRE) Resistance ladder voltage 12 (8 IRE) Resistance ladder voltage 13 (12 IRE) Resistance ladder voltage 14 (16 IRE) Resistance ladder voltage 15 (20 IRE) Resistance ladder voltage 16 (24 IRE) Resistance ladder voltage 17 (28 IRE) Resistance ladder voltage 18 (32 IRE) Resistance ladder voltage 19 (36 IRE) Resistance ladder voltage 20 (40 IRE) Resistance ladder voltage 21 (44 IRE) Resistance ladder voltage 22 (48 IRE) Resistance ladder voltage 23 (52 IRE) Resistance ladder voltage 24 (56 IRE) Resistance ladder voltage 25 (60 IRE) Resistance ladder voltage 26 (64 IRE) Resistance ladder voltage 27 (68 IRE) Resistance ladder voltage 28 (72 IRE) Resistance ladder voltage 29 (76 IRE) Resistance ladder voltage 30 (80 IRE) Resistance ladder voltage 31 (84 IRE) Resistance ladder voltage 32 (88 IRE) Resistance ladder voltage 33 (92 IRE) Resistance ladder voltage 34 (96 IRE) Resistance ladder voltage 35 (100 IRE) (VCC = AVCC1 = AVCC2 = 5.0 V) Value Unit Typ Max 1000 1057 1114 1171 1229 1286 1343 1400 1457 1514 1571 1629 1686 1743 1800 1857 1914 1971 2029 2086 2143 2200 2257 2314 2371 2429 2486 2543 2600 2657 2714 2771 2829 2886 2943 3000 1040 1098 1156 1214 1272 1330 1388 1446 1504 1562 1620 1678 1736 1794 1852 1910 1968 2026 2084 2142 2200 2258 2316 2374 2432 2490 2548 2606 2664 2722 2780 2838 2896 2954 3012 3070 mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV Min 930 988 1046 1104 1162 1220 1278 1336 1394 1452 1510 1568 1626 1684 1742 1800 1858 1916 1974 2032 2090 2148 2206 2264 2322 2380 2438 2496 2554 2612 2670 2728 2786 2844 2902 2960 15 MB90050 MB90050 Palette Initial Value * Pedestal level Color code Comment Pedestal Relative value PED (IRE) 0 Absolute value PED (IRE) 40 Register setting value PED (HEX) 0A * Sink chip level Color code Comment Sink chip Relative value SYN (IRE) -40 Absolute value SYN (IRE) 0 Register setting value SYN (HEX) 00 * Translucence level Color code Comment translucence Relative value HAN (IRE) 32 Absolute value HAN (IRE) 72 Register setting value HAN (HEX) 12 * Color burst level Relative value Color code * Y (COLOR) Color code 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 16 Comment White-1 Yellow-1 Cyan-1 Green-1 Magenta-1 Red-1 Blue-1 Black-1 White-0 Yellow-0 Cyan-0 Green-0 Magenta-0 Red-0 Blue-0 Black-0 Relative value Luminance (IRE) 100 72 64 56 40 32 24 16 92 64 56 48 32 24 16 8 Absolute value YD (IRE) 140 112 104 96 80 72 64 56 132 104 96 88 72 64 56 48 Register setting value YD (HEX) 23 1C 1A 18 14 12 10 0E 21 1A 18 16 12 10 0E 0C Comment Burst Absolute value Register setting value BST0 BST1 BST2 BST3 BST0 BST1 BST2 BST3 BST0 BST1 BST2 BST3 (IRE) (IRE) (IRE) (IRE) (IRE) (IRE) (IRE) (IRE) (HEX) (HEX) (HEX) (HEX) 0 -24 0 24 40 16 40 64 0A 04 0A 10 MB90050 * C (COLOR) Relative value Color code 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 * V (COLOR) Absolute value Color code 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Comment White-1 Yellow-1 Cyan-1 Green-1 Magenta-1 Red-1 Blue-1 Black-1 White-0 Yellow-0 Cyan-0 Green-0 Magenta-0 Red-0 Blue-0 Black-0 0 140 107 69 70 106 107 69 56 132 99 61 62 98 99 61 48 90 140 93 113 81 95 63 83 56 132 85 105 73 87 55 75 48 180 140 117 139 122 54 37 59 56 132 109 131 114 46 29 51 48 270 140 131 95 111 65 81 45 56 132 123 87 103 57 73 37 48 Register setting value VD0 (HEX) 23 1B 11 11 1B 1B 11 0E 21 19 0F 0F 19 19 0F 0C VD1 (HEX) 23 17 1C 14 18 10 15 0E 21 15 1A 12 16 0E 13 0C VD2 (HEX) 23 1D 23 1F 0D 09 0F 0E 21 1B 21 1D 0B 07 0D 0C VD3 (HEX) 23 21 18 1C 10 14 0B 0E 21 1F 16 1A 0E 12 09 0C 17 Comment White-1 Yellow-1 Cyan-1 Green-1 Magenta-1 Red-1 Blue-1 Black-1 White-0 Yellow-0 Cyan-0 Green-0 Magenta-0 Red-0 Blue-0 Black-0 Phase (degrees) Absolute value 0 40 35 5 14 66 75 45 40 40 35 5 14 66 75 45 40 90 40 21 49 25 55 31 59 40 40 21 49 25 55 31 59 40 180 40 45 75 66 14 5 35 40 40 45 75 66 14 5 35 40 270 40 59 31 55 25 49 21 40 40 59 31 55 25 49 21 40 Register setting value CD0 CD1 CD2 CD3 (HEX) (HEX) (HEX) (HEX) 0A 09 01 03 11 13 0B 0A 0A 09 01 03 11 13 0B 0A 0A 05 0C 06 0E 08 0F 0A 0A 05 0C 06 0E 08 0F 0A 0A 0B 13 11 03 01 09 0A 0A 0B 13 11 03 01 09 0A 0A 0F 08 0E 06 0C 05 0A 0A 0F 08 0E 06 0C 05 0A Amplitude (IRE) 0 20 36 30 30 36 20 0 0 20 36 30 30 36 20 0 0 195 284 241 61 104 15 0 0 195 284 241 61 104 15 0 MB90050 * M (MONO) Color code 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Comment Level-17 Level-16 Level-15 Level-14 Level-13 Level-12 Level-11 Level-10 Level-07 Level-06 Level-05 Level-04 Level-03 Level-02 Level-01 Level-00 Relative value Luminance (IRE) 100 80 68 60 44 36 24 16 92 72 60 52 36 28 16 8 Absolute value MD (IRE) 140 120 108 100 84 76 64 56 132 112 100 92 76 68 56 48 Register setting value MD (HEX) 23 1E 1B 19 15 13 10 0E 21 1C 19 17 13 11 0E 0C Note : Minimum value for absolute value of IRE is 0. Maximum value for absolute value of IRE is 140. Relative value is the value when the pedestal level is 0IRE. * D (DIGITAL) Color code 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 18 Comment Level-15 Level-14 Level-13 Level-12 Level-11 Level-10 Level-09 Level-08 Level-07 Level-06 Level-05 Level-04 Level-03 Level-02 Level-01 Level-00 Display color signal output pin DCOL5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DCOL4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DCOL3 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 DCOL2 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 DCOL1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 DCOL0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 Register setting value DD (HEX) 0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00 MB90050 * VOUT Output * YOUT Output * COUT Output Note : Voltage of each output depends on palette setting value. 19 MB90050 2. AC Characteristics Parameter Shift clock cycle time Shift clock pulse width Shift clock signal rise/fall time Shift clock start time Data setup time Data hold time Chip select end time Chip select signal rise/fall time Horizontal sync signal rise time Horizontal sync signal fall time Vertical sync signal rise time Vertical sync signal fall time Horizontal sync signal pulse width Vertical sync signal pulse width Symbol tCYC tWCH tWCL tCR tCF tSS tSU tH tEC tCRC tCFC tHR tHF tVR tVF tWH tWV tWFH Field signal pulse width tWFL FLDI 1 H* (Ta = -40 C to +85 C, VCC = 5.0 V10 %, VSS = 0 V) Value Pin name Unit Remarks Min Max SCLK SCLK SCLK SCLK SIN SIN CS CS HSYNCI HSYNCI VSYNCI VSYNCI HSYNCI VSYNCI 250 100 100 100 100 50 100 4.0 1 1 200 200 200 200 200 200 200 200 8.0 5 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns s H* H* Refer to "Field Signal Input Timing" Refer to "Reset Signal Input Timing" Refer to "Vertical* Horizontal Sync Signal Input Timing" Refer to "Serial Input Timing" Reset input pulse width tWR RESET 10 s * : 1 H is assumed to be one horizontal sync signal period. 20 MB90050 * Serial Input Timing CS 0.8 VCC 0.2 VCC tSS tCFC 0.8 VCC 0.2 VCC tCRC tCYC tEC 0.8 VCC SCLK tWCH tCR tCF tWCL 0.2 VCC tH tSU 0.8 VCC SIN 0.2 VCC * Vertical*Horizontal Sync Signal Input Timing HSYNCI 0.8 VCC 0.2 VCC tHF tWH 0.8 VCC 0.2 VCC tHR VSYNCI 0.8 VCC 0.2 VCC tVF tWV 0.8 VCC 0.2 VCC tVR 21 MB90050 * Field Signal Input Timing FLDI 0.8 VCC 0.2 VCC 0.2 VCC 0.8 VCC tWFL tWFH * Reset Signal Input Timing RESET 0.2 VCC tWR 0.2 VCC 22 MB90050 3. Recommended Input Timings H/V-separated sync signal input timing Parameter Vertical sync signal frequency Vertical sync signal pulse width Horizontal sync signal period Horizontal sync signal pulse width NTSC 60 (59.94) 1 to 5 63.492 (63.5555) 4.19 to 5.71 (4.7 0.1) PAL 30 1 to 4 64 4.5 to 4.9 Unit Hz H s s Remaeks *1 *2 *1 *1 *1 : Parenthesized values are specifications for color information display. *2 : 1 H is assumed to be one horizontal sync signal period. 4. Clock Timing Parameter Dot clock for display* Clock for color burst (NTSC) * Clock for color burst (PAL) * Symbol fDC Pin EXD XD EXS XS Value Min 8 Typ 14.318185 17.734475 Max 20 Unit MHz MHz MHz Remarks 4FSC * : Input the signal with a duty cycle of 50%. 23 MB90050 5. Output Timings (1) Horizontal timing Symbol HPS EQP1E HPE BSTS BSTE HBLKE SEP1S EQP2S EQP2E SEP2S HBLKS IHCLR NTSC (or simple PAL) 0 34 68 76 112 143 388 455 489 842 888 910 PAL (or simple NTSC) 0 42 84 100 140 186 484 568 610 1050 1106 1135 (1137) * Refer to "NTSC/PAL Horizontal Timing". Remarks * : Parenthesized values assume the last raster in each V cycle (field) . Note : The values in the above list are 4FSC count values. (2) Verticl timing Symbol VPS VPE EQPE VBLKE VBLKS VPS NTSC (or simple NTSC) Interlaced 0 6 12 36 519 525 Non interlaced 0 6 12 36 519 526 PAL (or simple PAL) Interlaced 0 5 10 45 620 625 Non interlaced 0 5 10 45 620 624 Remarks Refer to "NTSC Vertical Timing" and "PAL Vertical Timing". Note : The values in the about list are 1/2 H count values. (1 H is assumed to be one horizontal sync signal period.) 24 MB90050 * NTSC/PAL Horizontal Timing Video signal Horizontal sync signal Horizontal retrace blanking interval Burst flag Equalizing pulse Cut-in pulse EQP2E EQP2S SEP1S HBLKE BSTE BSTS HPE EQP1E HPS HBLKS IHCLR HBLKS SEP2S 25 26 MB90050 * NTSC Vertical Timing Even-numbered field 521 522 523 524 525 1 2 3 4 5 6 7 ** 18 19 20 ** 258 259 260 261 262 263 Composite video signal Horizontal scanning line No. Vertical sync interval Vertical retrace blanking interval Equalizing pulse interval VBLKS VPS VPE EQPE VBLKE VBLKS VPS Odd-numbered field 259 260 261 262 263 264 265 266 267 268 269 270 ** 280 281 282 ** 521 522 523 524 525 1 Composite video signal Horizontal scanning line No. Vertical sync interval Vertical retrace blanking interval Equalizing pulse interval VBLKS VPS VPE EQPE VBLKE VBLKS VPS First field * PAL Vertical Timing Color burst phase Composite video signal Horizontal scanning line No. Vertical sync interval Vertical retrace blanking interval Equalizing pulse interval 621 622 623 624 625 1 2 3 4 5 6 7 ** 22 23 24 ** 308 309 310 311 312 313 BSTE VBLKS VPS VPE EQPE BSTS VBLKE BSTE VBLKS VPS Second field Color burst phase Composite video signal 309 310 311 Horizontal scanning line No. Vertical sync interval Vertical retrace blanking interval Equalizing pulse interval 312 313 314 315 316 317 318 319 320 ** 335 336 337 ** BSTE VBLKS VPS VPE EQPE BSTS VBLKE BSTE 621 622 623 624 625 1 VBLKS Third field 621 622 623 624 625 1 2 3 4 5 6 7 ** 22 23 24 ** 308 309 310 311 VPS Color burst phase Composite video signal Horizontal scanning line No. Vertical sync interval Vertical retrace blanking interval Equalizing pulse interval BSTE VBLKS VPS VPE EQPE, BSTS 312 313 VBLKE BSTE, VBLKS VPS Fourth field 312 313 314 315 316 317 318 319 320 ** 335 336 337 ** 621 622 623 624 625 1 Color burst phase 309 310 311 Composite video signal Horizontal scanning line No. Vertical sync interval Vertical retrace blanking interval Equalizing pulse interval BSTE, VBLKS VPS VPE EQPE BSTS VBLKE BSTE VBLKS VPS MB90050 Notes : * indicates the HSYNC positions in the equalizing pulse intends. * The arrows marks indicate the phase of color subcarrier. ( : +135, : -135) 27 MB90050 COMMAND LIST Command no. 15 to 12 Command code/data 11 10 9 8 7 FL 6 0 5 4 3 2 1 0 Function VRAM write address setting Character data setting 1 Character data setting 2 Line control data setting 1 Line control data setting 2 Screen output control 1 Screen output control 1 Vertical display position control Horizontal display position control Character vertical size control 0 1 2 3 4 5-0 5-1 5-2 5-3 6-0 0000 0001 0010 0011 0100 0101 0101 0101 0101 0110 AY3 AY2 AY1 AY0 AX5 AX4 AX3 AX2 AX1 AX0 MS1 MS0 MM1 MM0 MB3 MB2 MB1 MB0 MC3 MC2 MC1 MC0 MR MG MBL M8 M7 M6 M5 M4 M3 M2 LF2 L2 0 0 Y2 X2 M1 LF1 L1 0 0 Y1 X1 M0 LF0 L0 0 0 Y0 X0 HA LHS LW2 LW1 LW0 LFD LFC LFB LFA LF3 LDS 0 0 1 1 0 0 0 1 0 1 0 LG1 LG0 0 0 LD LE LM1 LM0 0 DSP L3 0 0 Y3 X3 0 SDS UDS FM1 FM0 BT1 BT0 BD1 BD0 0 0 0 Y8 X8 0 Y7 X7 0 Y6 X6 Y5 X5 Y4 X4 HB2 HB1 HB0 HA2 HA1 6-1 0110 0 1 0 0 Shaded BH3 BH2 BH1 BH0 BS3 BS2 BS1 BS0 background frame color control Transparent/semiTC3 TC2 TC1 TC0 HC3 HC2 HC1 HC0 transparent colors control GF3 GF2 GF1 GF0 GC3 GC2 GC1 GC0 0 0 0 0 U3 U2 U1 U0 Graphic color control Screen background control Sprite character control 1 Sprite character control 2 Sprite character control 3 Sprite character control 4 (Continued) 6-2 0110 1 0 TC HC 6-3 7-3 8-1 8-2 9-0 9-1 0110 0111 1000 1000 1001 1001 1 1 0 1 0 1 1 1 1 0 0 0 GF 1 GC 0 SD1 SD0 SM7 SM6 SM5 SM4 SM3 SM2 SM1 SM0 1 SBL 0 SH2 SH1 SH0 0 0 0 0 SY9 SY8 SY7 SY6 SY5 SY4 SY3 SY2 SY1 SY0 SX9 SX8 SX7 SX6 SX5 SX4 SX3 SX2 SX1 SX0 28 MB90050 (Continued) Command no. 15 to 12 11 Command code/data 10 0 1 1 0 1 0 1 0 0 1 9 0 0 8 0 0 7 VIX 0 6 HIX H2 5 0 H1 4 0 H0 3 IN1 VHE 0 2 IN0 HE F2 1 IE1 0 F1 0 0 F0 FDS FDC MC NP2 NP1 NP0 Function 11-0 11-1 11-3 12-0 12-1 12-2 12-3 13-0 13-1 14-0 14-1 1011 1011 1011 1100 1100 1100 1100 1101 1101 1110 1110 0 0 1 0 0 1 1 0 1 0 0 IE0 Sync control 1 Sync control 2 Sync detection control STO BUO VSO HSO CSO VBO FDO DHO DBO DCO Output pin control 1 STX BUX VOX HOX COX VBX FDX DHX DBX DCX Output pin control 2 STU BUU VSU HSU CSU VBU FDU CKO FSO CKS FSS 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Output pin control 3 PO3 PO2 PO1 PO0 Output pin control 4 PLV PLY PLC PLM PLD PL3 PL2 PL1 PL0 Color palette setting AD5 AD4 AD3 AD2 AD1 AD0 Analog level control 0 0 FRS 0 0 0 0 FA1 FA0 Font RAM setting 1 FR2 FR1 FR0 Font RAM setting 2 0 0 AA2 AA1 AA0 Note : When a reset signal is input (L level signal input to RESET pin) , the screen output control 1 (command 5 to command 0) bits (SDS, UDS and DSP) and the output pin control 1 to 4 (command 12-0 to command 123) bits are initialized to "0".The color palette setting (command 13-0) and analog level control (command 13-1) bits are internally set to their predetermined initial values.The contents of other register bits, VRAM and font RAM are undefined. After reset input (release) is completed, set all command and font RAM settings. 29 MB90050 SAMPLE CIRCUIT MB90050 Composite IN Composite OUT Video amplifier & clamp circuit YIN/CIN VIN VOUT Buffer circuit YOUT/COUT Video amplifier & clamp circuit Sync separation circuit YIN CIN YOUT COUT Buffer circuit VSYNCI HSYNCI CS Control microcontroller SCLK SIN BUSY +5V AVCC1 + AVCC2 AVSS1 AVSS2 +5V + VCC VSS XD 3.3 H EXD EXS XS 20 pF 20 pF (Approx. 14 MHz) NTSC: 14.31818 MHz PAL : 17.734475 MHz 30 MB90050 MB90050-001 FONT DATA (MB90050-001 is typical product. ) 000 001 002 003 004 005 006 007 008 009 00A 00B 00C 00D 00E 00F 010 011 012 013 014 015 016 017 018 019 01A 01B 01C 01D 01E 01F 020 021 022 023 024 025 026 027 028 029 02A 02B 02C 02D 02E 02F 030 031 032 033 034 035 036 037 038 039 03A 03B 03C 03D 03E 03F (Continued) 31 MB90050 040 041 042 043 044 045 046 047 048 049 04A 04B 04C 04D 04E 04F 050 051 052 053 054 055 056 057 058 059 05A 05B 05C 05D 05E 05F 060 061 062 063 064 065 066 067 068 069 06A 06B 06C 06D 06E 06F 070 071 072 073 074 075 076 077 078 079 07A 07B 07C 07D 07E 07F (Continued) 32 MB90050 080 081 082 083 084 085 086 087 088 089 08A 08B 08C 08D 08E 08F 090 091 092 093 094 095 096 097 098 099 09A 09B 09C 09D 09E 09F 0A0 0A1 0A2 0A3 0A4 0A5 0A6 0A7 0A8 0A9 0AA 0AB 0AC 0AD 0AE 0AF 0B0 0B1 0B2 0B3 0B4 0B5 0B6 0B7 0B8 0B9 0BA 0BB 0BC 0BD 0BE 0BF (Continued) 33 MB90050 0C0 0C1 0C2 0C3 0C4 0C5 0C6 0C7 0C8 0C9 0CA 0CB 0CC 0CD 0CE 0CF 0D0 0D1 0D2 0D3 0D4 0D5 0D6 0D7 0D8 0D9 0DA 0DB 0DC 0DD 0DE 0DF 0E0 0E1 0E2 0E3 0E4 0E5 0E6 0E7 0E8 0E9 0EA 0EB 0EC 0ED 0EE 0EF 0F0 0F1 0F2 0F3 0F4 0F5 0F6 0F7 0F8 0F9 0FA 0FB 0FC 0FD 0FE 0FF (Continued) 34 MB90050 100 101 102 103 104 105 106 107 108 109 10A 10B 10C 10D 10E 10F 110 111 112 113 114 115 116 117 118 119 11A 11B 11C 11D 11E 11F 120 121 122 123 124 125 126 127 128 129 12A 12B 12C 12D 12E 12F 130 131 132 133 134 135 136 137 138 139 13A 13B 13C 13D 13E 13F (Continued) 35 MB90050 140 141 142 143 144 145 146 147 148 149 14A 14B 14C 14D 14E 14F 150 151 152 153 154 155 156 157 158 159 15A 15B 15C 15D 15E 15F 160 161 162 163 164 165 166 167 168 169 16A 16B 16C 16D 16E 16F 170 171 172 173 174 175 176 177 178 179 17A 17B 17C 17D 17E 17F (Continued) 36 MB90050 180 181 182 183 184 185 186 187 188 189 18A 18B 18C 18D 18E 18F 190 191 192 193 194 195 196 197 198 199 19A 19B 19C 19D 19E 19F 1A0 1A1 1A2 1A3 1A4 1A5 1A6 1A7 1A8 1A9 1AA 1AB 1AC 1AD 1AE 1AF 1B0 1B1 1B2 1B3 1B4 1B5 1B6 1B7 1B8 1B9 1BA 1BB 1BC 1BD 1BE 1BF (Continued) 37 MB90050 (Continued) 1C0 1C1 1C2 1C3 1C4 1C5 1C6 1C7 1C8 1C9 1CA 1CB 1CC 1CD 1CE 1CF 1D0 1D1 1D2 1D3 1D4 1D5 1D6 1D7 1D8 1D9 1DA 1DB 1DC 1DD 1DE 1DF 1E0 1E1 1E2 1E3 1E4 1E5 1E6 1E7 1E8 1E9 1EA 1EB 1EC 1ED 1EE 1EF 1F0 1F1 1F2 1F3 1F4 1F5 1F6 1F7 1F8 1F9 1FA 1FB 1FC 1FD 1FE 1FF 38 MB90050 ORDERING INFORMATION Part number MB90050PF Package 48-pin, plastic QFP (FPT-48P-M15) Remarks 39 MB90050 PACKAGE DIMENSION 48-pin, plastic QFP (FPT-48P-M15) Note 1) * : These dimensions do not include resin protrusion. Note 2) Pins width and pins thickness include plating thickness. Note 3) Pins width do not include tie bar cutting remainder. 15.300.40(.602.016)SQ * 12.000.10(.472.004)SQ 36 25 0.170.06 (.007.002) 37 24 Details of "A" part 2.40 -0.20 .094 -.008 0.10(.004) +0.30 +.012 (Mounting height) INDEX 0~8 48 13 1 12 "A" 0.850.30 (.033.012) 0.25 -0.20 +0.10 +.004 0.80(.031) .010 -.008 (Stand off) 0.320.05 (.013.002) 0.20(.008) M C 2003 FUJITSU LIMITED F48025S-c-3-4 Dimensions in mm (inches) Note : The values in parentheses are reference values. 40 MB90050 FUJITSU LIMITED All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of Fujitsu semiconductor device; Fujitsu does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. Fujitsu assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of Fujitsu or any third party or does Fujitsu warrant non-infringement of any third-party's intellectual property right or other right by using such information. Fujitsu assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Law of Japan, the prior authorization by Japanese government will be required for export of those products from Japan. F0412 (c) 2004 FUJITSU LIMITED Printed in Japan |
Price & Availability of MB90050 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |