 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 8-PIN SOP, SLOW SWITCHING TYPE, 260 V BREAK DOWN VOLTAGE PS7622A-2A 2-CH OPTICAL COUPLED MOS FET FEATURES * 2 CHANNEL TYPE 1a + 1a output * LOW LED OPERATING CURRENT IF = 1 mA * DESIGNED FOR AC/DC SWITCHING LINE CHANGER * SMALL AND THIN PACKAGE 8-pin SOP, Height = 2.1 mm * LOW OFFSET VOLTAGE * ORDERING NUMBER OF TAPING PRODUCT PS7622A-2A-F3,F4 DESCRIPTION The PS7622-2A is a solid state relay containing GaAs LEDs on light emitting side (input side) and MOS FETs on the output side. It is suitable for analog signal control because of it's low offset and high linearity. APPLICATIONS * EXCHANGE EQUIPMENT (FAX, MODEM, OCU + SLIC, ETC.) * MEASUREMENT EQUIPMENT * FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS1 (TA = 25C) PART NUMBER SYMBOL PARAMETERS Forward Voltage, IF = 1.4 mA Reverse Current, VR = 5 V Off-state Leakage Current, VD = 260 V Output Capacitance, VD = 0 V, f = 1 MHz LED On-state Current, IL = 200 mA On-state Resistance, IF = 1.4 mA, IL = 10 mA Turn-on Time1, IF = 1.4 mA, V0 = 60 V, RL = 1.5 k, PW = 50 ms Turn-off Time1, IF = 1.4 mA, V0 = 60 V, RL = 1.5 k, PW = 50 ms Rise Time, IF = 1.4 mA, V0 = 60 V, RL = 1.5 k, PW = 50 ms Fall Time, IF = 1.4 mA, V0 = 60 V, RL = 1.5 k, PW = 50 ms Isolation Resistance, VI-O = 1.0 kVDC Isolation Capacitance, V = 0 V, f = 1 MHz UNITS V A A pF/ch mA ms ms ms ms pF 0.80 0.4 109 0.4 3.5 10 7.0 122 1.0 5.0 20 12 MIN PS7622A-2A TYP 1.2 MAX 1.4 5.0 1.0 MOS Diode FET VF IR ILOFF COUT IFON RON TON Coupled TOFF TR TF RI-O CI-O Notes: 1. Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 Vo = 5 V Input monitor Rin RL tr ton tf toff Vo monitor Output 90 % 10 % California Eastern Laboratories PS7622A-2A ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 50 VR Reverse Voltage V 5.0 PD Power Dissipation mW/ch 50 IFP Peak Forward Current2 A 1 MOS FET VL Break Down Voltage V 260 IL Countinuous Load Current mA 200 ILP Pulse Load Current3 mA 400 PD Power Dissipation mW/ch 180 Coupler BV Isolation Voltage4 Vr.m.s. 1500 PT Total Power Dissipation mW 460 TOP Operating Ambient Temp. C -40 to +80 TSTG Storage Temperature C -40 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 s, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. OUTLINE DIMENSIONS (Units in mm) PS7622A-2A 0.40.3 9.080.5 2.05 +0.08 -0.05 0.05 +0.08 -0.05 2.54 0.15+0.10 -0.05 7.00.3 0.40 +0.10 -0.05 0.25 M 4.4 0.50.3 RECOMMENDED OPERATING CONDITIONS PART NUMBER SYMBOLS PARAMETERS IF LED Operating Current VF LED off Voltage PS7622A-2A UNITS MIN TYP MAX mA 1 1.4 20 V 0 0.5 TOP VIEW 8 7 6 5 1. 2. 3. 4. 1 2 3 4 LED Anode LED Cathode LED Anode LED Cathode 5. 6. 7. 8. MOS FET MOS FET MOS FET MOS FET ORDERING INFORMATION PART NUMBER PS7622A-2A PS7622A-2A-F3 PS7622A-2A-F4 PACKAGE 8-pin SOP PACKING STYLE Magazine case 45 pcs Embossed Tape 1500 pcs/reel APPLICATION PART NUMBER1 PS7622A-2A Notes: 1. For the application of the Safety Standard, following part number should be used. PS7622A-2A TYPICAL PERFORMANCE CURVES MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 (TA = 25C, unless otherwise specified) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Forward Current, IF (mA) Maximum Load Current, IL (mA) 80 250 200 150 100 50 0 -25 60 40 20 0 -25 0 25 50 75 80 100 0 25 50 75 80 100 Ambient Temperature, TA (C) Ambient Temperature, TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 250 f = 1 MHz Output Capacitance Cout (pF) Forward Voltage, VF (V) 200 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1.0 1 mA 150 100 50 0.8 -25 0 25 50 75 100 0 10 20 30 40 50 60 Ambient Temperature, TA (C) Applied Voltage, VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10-6 LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA 200 Off-state Leakage Current, ILoff VD = 260 V Load Current, IL (mA) 10-7 100 10 -8 10-9 -1.0 -0.5 -100 0 0.5 1.0 10 -10 -200 10 -11 0 20 40 60 80 Ambient Temperature, TA (C) Remarks: The graphs indicate nominal characteristics. Load Voltage, VL (V) PS7622A-2A TYPICAL PERFORMANCE CURVES NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 (TA = 25C, unless otherwise specified) ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, IL = 10 mA Normalized On-state Resistance, Ron 2.5 Normalized to 1.0 at TA = 25 C, IF = 10 mA IL = 10 mA 25 1.5 1.0 0.5 0.0 -25 Number (pcs) 2.0 20 15 10 5 0 0 25 50 75 100 3.0 3.2 3.4 3.6 3.8 Ambient Temperature, TA (C) On-State Resistance, Ron () TURN-ON TIME vs. FORWARD CURRENT 40 VO = 60 V, RL = 1.5 k 30 TURN-OFF TIME vs. FORWARD CURRENT 25 VO = 60 V, RL = 1.5 k Turn-off Time, toff (ms) 20 Turn-on Time, ton (ms) 15 20 10 10 5 0 5 10 15 0 5 10 15 Forward Current, IF Forward Current, If (mA) TURN-ON TIME DISTRIBUTION 30 n = 50 pcs, IF = 1.4 mA, Vo = 60 V, RL = 1.5 K 25 TURN-OFF TIME DISTRIBUTION 30 25 n = 50 pcs, IF = 1.4 mA, Vo = 60 V, RL = 1.5 K Number (pcs) Number (pcs) 20 20 15 10 15 10 5 0 6 8 10 12 14 5 0 5 6 7 8 9 Turn-on Time, ton (ms) Remarks: The graphs indicate nominal characteristics. Turn-off Time, toff (ms) PS7622A-2A TYPICAL PERFORMANCE CURVES NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 (TA = 25C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 C, IF = 1.4 mA, VO = 60 V, RL = 1.5 k Normalized Turn-on Time, ton 2.5 Normalized Turn-off Time, toff 2.0 1.5 1.0 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V, RL = 500 2.5 2.0 1.5 1.0 0.5 0.0 -25 0.5 0.0 -25 0 25 50 75 100 0 25 50 75 100 Ambient Temperature, TA (C) Ambient Temperature, TA (C) TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) 1.750.1 OUTLINE AND DIMENSIONS (REEL) 2.5 1.550.1 2.80.1 7.50.1 16.00.3 10.450.1 21.00.8 2.00.1 4.00.1 1005.0 1.550.1 12.00.1 7.60.1 0.3 330 2.00.5 13.01.0 16.4 +2.0 -0.0 Notes: 1. Packing : 1500 pcs/reel F3, F4 TAPE DIRECTION PS7622A-2A-F3 PS7622A-2A-F4 PS7622A-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 235 C (package surface temperature) * Time of temperature higher than 210 C 30 seconds or less * Number of reflows Two * Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorinebased cleaning solvent. Avoid shorting between portion of frame and leads. : Portion of frame Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM 10/30/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE |
Price & Availability of PS7622A-2A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |