Part Number Hot Search : 
00103 U16C15PT FFCKS5H0 NTE123 TGA2701 RV62HR MAX4112 RHNJ6
Product Description
Full Text Search
 

To Download TPSMA27A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TPSMA6.8 THRU TPSMA43A
SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 43.0 Volts
D
Peak Pulse Power - 400 Watts
FEATURES
P A T E
DO-214AC MODIFIED J-BEND
0.065 (1.65) 0.049 (1.25)
0.110 (2.79) 0.100 (2.54)
0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152)
0.090 (2.29) 0.078 (1.98)
0.060 (1.52) 0.030 (0.76) 0.008 (0.203) MAX. 0.208 (5.28) 0.194 (4.93)
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Ideal for automated placement Low profile package Built-in strain relief Exclusive patented PARTM oxide passivated chip construction 400W peak pulse power capability with a 10/1000s waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) min. For devices with V(BR)10V ID are typically less than 1.0A at TA=150C Designed for under the hood surface mount applications High temperature soldering: 250C/10 seconds at terminals
N
T E
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic body over passivated chip Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.002 ounces, 0.064 grams
Dimensions in inches and (millimeters)
Available in uni-directional only
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
RATINGS
SYMBOLS
VALUE
UNITS
Peak power dissipation with a 10/1000s waveform,
(NOTES 1, 2 FIG. 3)
PPPM IPPM IFSM VF TJ, TSTG
Minimum 400
SEE TABLE 1
Watts Amps Amps Volts C
Peak power pulse current with a 10/1000s waveform (NOTE 1, FIG. 1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 25A (NOTE 3) Operating junction and storage temperature range
40.0 3.5 -65 to +185
NOTES: (1) Non-repetitive current pulse, per Fig.3 and derated above TA=25C per Fig. 2 (2) Mounted on P.C.B. with 0.2 x 0.2" (5.0 x 0.5mm) copper pads attached to each terminal (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minutes maximum
1/21/99
ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1
Test Current at IT (mA) Maximum Maximum Reverse Reverse Leakage Leakage at VWM, at VWM TA=150C IR (A) ID (A) Maximum Peak Pulse Surge Current IPPM (NOTE 2) (Amps) Maximum Clamping Voltage at IPP Vc (Volts)
Device
Device Marking Code
Breakdown Voltage V(BR) Volts (NOTE 1) MIN. MAX.
Stand-off Voltage VWM (Volts)
TPSMA6.8 TPSMA6.8A TPSMA7.5 TPSMA7.5A TPSMA8.2 TPSMA8.2A TPSMA9.1 TPSMA9.1A TPSMA10 TPSMA10A TPSMA11 TPSMA11A TPSMA12 TPSMA12A TPSMA13 TPSMA13A TPSMA15 TPSMA15A TPSMA16 TPSMA16A TPSMA18 TPSMA18A TPSMA20 TPSMA20A TPSMA22 TPSMA22A TPSMA24 TPSMA24A TPSMA27 TPSMA27A TPSMA30 TPSMA30A TPSMA33 TPSMA33A TPSMA36 TPSMA36A TPSMA39 TPSMA39A TPSMA43 TPSMA43A
ADP AEP AFP AGP AHP AKP ALP AMP ANP APP AQP ARP ASP ATP AUP AVP AWP AXP AYP AZP BDP BEP BFP BGP BHP BKP BLP BMP BNP BPP BQP BRP BSP BTP BUP BVP BWP BXP BYP BZP
6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.50 10.80 11.40 11.70 12.40 13.50 14.30 14.40 15.20 16.20 17.10 18.00 19.00 19.80 20.90 21.60 22.80 24.30 25.70 27.00 28.50 29.70 31.40 32.40 34.20 35.10 37.10 38.70 40.90
7.48 7.14 8.25 7.88 9.02 8.61 10.00 9.55 11.00 10.50 12.10 11.60 13.20 12.60 14.30 13.70 16.30 15.80 17.60 16.80 19.80 18.90 22.00 21.00 24.20 23.10 26.40 25.20 29.70 28.40 33.00 31.50 36.30 34.70 39.60 37.80 42.90 41.00 47.30 45.20
10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.65 8.92 9.40 9.72 10.20 10.50 11.10 12.10 12.80 12.90 13.60 14.50 15.30 16.20 17.10 17.80 18.80 19.40 20.50 21.80 23.10 24.30 25.60 26.80 28.20 29.10 30.80 31.60 33.30 34.80 36.80
300 300 150 150 50.0 50.0 10.0 10.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.9 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7
10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3
NOTES: (1) V(BR) measured after IT applied for 300s, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35
MAXIMUM RATINGS AND CHARACTERISTIC CURVES TPSMA6.8 THRU TPSMA43A
FIG. 1 - PEAK PULSE POWER RATING CURVE
100
NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG. 3 TA = 25C
PPPM, PEAK POWER, kW
10
1.0
0.2 x 0.2" (5.0 x 5.0mm) COPPER PAD AREAS
0.1 0.1s
1.0s
10s
100s
1.0ms
10ms
td, PULSE WIDTH, sec.
FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, %
100
75
50
25
0
0
25
50
75
100
125
150
175
200
TA, AMBIENT TEMPERATURE, C
FIG. 3 - PULSE WAVEFORM
150
IPPM, PEAK PULSE CURRENT, %
tr=10sec. PEAK VALUE IPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP
100
HALF VALUE - IPP 2
50
10/1000sec. WAVEFORM as DEFINED by R.E.A.
0
td
0
1
2
t, TIME, ms
3
4
MAXIMUM RATINGS AND CHARACTERISTIC CURVES TPSMA6.8 THRU TPSMA43A
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
10,000
TJ=25 C f=1 MHz Vsig=50mVp-p
CJ, JUNCTION CAPACITANCE, pF
1,000
MEASURED at ZERO BIAS
100
MEASURED at STAND-OFF VOLTAGE, VWM
10 1 2 5 10 20 50 100 200
V(BR), BREAKDOWN VOLTAGE, VOLTS
FIG. 5 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT IFSM, PEAK FORWARD SURGE CURRENT, AMPERES
200
8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max
100
50
10 1
5
10
50
100
NUMBER OF CYCLES AT 60 HZ


▲Up To Search▲   

 
Price & Availability of TPSMA27A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X