![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HN62435 Series 262144-word x 16-bit/524288-word x 8-bit CMOS Mask Programmable ROM ADE-203-472A(Z) Rev. 1.0 Nov. 16, 1995 Description The HN62435 is a 4-Mbit CMOS mask-Programmable ROM organized either as 262144 words by 16 bits or 524288 words by 8 bits. Realizing a access speed of 120/150 ns (max) depend upon technology of a high speed circuit. Features * Single 5 V supply * High speed Access time: 120/150 ns (max) * Low power Active: 275 mW (max) Standby: 165 W (max) * Byte-wide or word-wide data organization (Switched by BHE terminal) * Three-state data output for or-tying * Directly TTL compatible All inputs and outputs * Pin compatible with 4 Mbit EPROM (HN27C4000G/FP) Ordering Information Type No. HN62435P-12 HN62435P-15 HN62435FA-12 HN62435FA-15 HN62435TT-12 HN62435TT-15 Access time 120 ns 150 ns 120 ns 150 ns 120 ns 150 ns Package 600 mil 40-pin plastic DIP (DP-40) 525 mil 40-pin plastic SOP (FP-40D) 400 mil 44-pin plastic TSOP II (TTP-44D) HN62435 Series Pin Arrangement HN62435P Series HN62435FA Series A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 (Top View) 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 A8 A9 A10 A11 A12 A13 A14 A15 A16 BHE VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC NC NC A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 HN62435TT Series 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 (Top View) 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 NC NC A8 A9 A10 A11 A12 A13 A14 A15 A16 BHE VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC Pin Description Pin name A-1, A0 to A17 D0 to D15 BHE CE OE NC VCC VSS Function Address inputs Data outputs 8/16 bit (byte/word) mode switch Chip enable Output enable No connection Power supply Ground 2 HN62435 Series Block Diagram A12 A2 X Decoder Memory Array A17 A13 Address Buffer A1 A0 Y Decoder Y Gates (A-1)*1 Hex/Byte BHE OE 3-state output buffer CE D0 BHE = VIH : 16-bit (D15 to D0) BHE = VIL : 8-bit (D7 to D0) Note : 1. A-1 is least significant address. When BHE is 'low', D14 to D8 goes the high impedance state, and D15 should be A-1. D15/(D7) 3 HN62435 Series Mode Selection Pin Data output Mode Standby Output disable Read (16-bit) Read (8-bit) Read (8-bit) CE H L L L L OE x *1 Address input D8-D15 LSB -- -- A0 A-1 A-1 MSB -- -- A17 A17 A17 BHE x x H L L D15/A-1 D0-D7 x x Dout L H High-Z High-Z D0 to D7 D0 to D7 D8 to D15 *2 High-Z High-Z D8 to D15 High-Z High-Z H L L L Notes: 1. x: Don't care. 2. High-Z: High impedance Absolute Maximum Ratings Parameter Supply voltage *1 *1 Symbol VCC Vin, Vout Topr Tstg Tbias Value -0.3 to +7.0 -0.3 to VCC + 0.3 0 to + 70 -55 to +125 -20 to +85 Unit V V C C C All input and output voltage Operating temperature range Storage temperature range Temperature under bias Note: 1. With respect to V SS . Recommended DC Operating Conditions (Ta = 0 to + 70C) Parameter Supply voltage Symbol VCC VSS Input voltage VIH VIL Min 4.5 0 2.2 -0.3 Typ 5.0 0 -- -- Max 5.5 0 VCC + 0.3 0.8 Unit V V V V 4 HN62435 Series DC Characteristics (VCC = 5.0 V 10%, VSS = 0 V, Ta = 0 to + 70C) Parameter Supply current Active Standby Standby Input leakage current Output leakage current Output voltage Symbol I CC I SB1 I SB2 |IIL| |IOL | VOH VOL Min -- -- -- -- -- 2.4 -- Max 50 30 3 10 10 -- 0.4 Unit mA A mA A A V V Test conditions VCC = 5.5 V, IDOUT = 0 mA, tRC = min VCC = 5.5 V, CE VCC - 0.2 V VCC = 5.5 V, CE 2.2 V Vin = 0 to VCC CE = 2.2 V, Vout = 0 to V CC I OH = -205 A I OL = 1.6 mA Capacitance (VCC = 5.0 V 10%, VSS = 0 V, Ta = 25C, Vin = 0 V, f = 1MHz) Parameter Input capacitance *1 *1 Symbol Cin Cout Min -- -- Max 10 15 Unit pF pF Output capacitance Note: 1. This parameter is sampled and not 100% tested. D15/A-1 pin is output. 5 HN62435 Series AC Characteristics (VCC = 5.0 V 10%, VSS = 0 V, Ta = 0 to + 70C) * * * * Output load: 1TTL + CL = 100 pF (including jig) Input pulse level: 0.6 to 2.4 V Input and output timing reference levels: 1.5 V Input rise and fall time: 5 ns HN62435-12 Parameter Read cycle time Address access time CE access time OE access time BHE access time Output hold time from address change Output hold time from CE Output hold time from OE Output hold time from BHE CE to output in high-Z OE to output in high-Z BHE to output in high-Z CE to output in low-Z OE to output in low-Z BHE to output in low-Z Note: Symbol t RC t AA t ACE t OE t BHE t DHA t DHC t DHO t DHB t CHZ t OHZ t BHZ t CLZ t OLZ t BLZ Min 120 -- -- -- -- 0 0 0 0 -- -- -- 5 5 5 Max -- 120 120 60 120 -- -- -- -- 60 60 60 -- -- -- HN62435-15 Min 150 -- -- -- -- 0 0 0 0 -- -- -- 5 5 5 Max -- 150 150 70 150 -- -- -- -- 70 70 70 -- -- -- Unit ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1 1 1 Note 1. t CHZ, tOHZ and t BHZ are defined as the time at which the output achieves the open circuit conditions and are not referred to output voltage levels. 6 HN62435 Series Timing Waveforms Word Mode (BHE = `VIH') or Byte Mode (BHE = `VIL') tRC Address tAA tACE CE tCLZ tOE OE tOLZ High-Z tDHO tOHZ Valid data High-Z tDHC tCHZ tDHA Dout Notes : 1. tDHA, tDHC, tDHO : Determined by faster. 2. tAA, tACE, tOE : Determined by slower. 3. tCLZ, tOLZ : Determined by slower. Word Mode, Byte Mode Switch A-1 High-Z tAA tDHA High-Z BHE tBHZ D7 to D0 tDHB High-Z D15 to D8 Valid data tBLZ Valid data tBHE Valid data Notes : 1. CE and OE are enable, A17 to A0 are valid. 2. D15/A-1 pin is in the output state when BHE is high, CE and OE are enable. Therefore, the input signals of opposite phase to the output must not be applied to them. 7 HN62435 Series Package Dimensions HN62435P Series (DP-40) Unit: mm 40 52.80 53.80 Max 21 13.40 2.54 Min 5.06 Max 15.00 Max 1 2.57 Max 1.20 20 15.24 0.51 Min 2.54 0.25 0.48 0.10 0.25 - 0.05 0 - 15 + 0.13 HN62435FA Series (FP-40D) 26.00 26.20 Max 40 21 10.70 Unit: mm 1.04 Max 0.17 0.05 1 20 3.00 Max 14.13 0.30 1.72 0.10 0.12 M 0.19 0.10 1.27 0.40 0.10 0 - 10 0.80 0.20 8 HN62435 Series Package Dimensions (cont) HN62435TT Series (TTP-44D) 18.41 18.81 Max 44 23 Unit: mm 1 0.30 0.10 0.80 0.13 M 22 10.16 1.105 Max 1.20 Max 0.17 0.05 11.76 0.20 0 - 5 +0.03 -0.05 0.10 0.80 0.13 0.50 0.10 9 |
Price & Availability of HN62435SERIES
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |