 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TK11032 TEMPERATURE SENSOR IC FEATURES s s s s s s Linear Output Voltage 6 MV/C Output Active High On/Off Control 2.7 to 10.0 V Supply Range Miniature Package (SOT-25) Minimum External Parts Count Low Power Consumption APPLICATIONS s s s s s s s s Home and Industrial Thermostats Automotive Climate Control Battery Charger Temperature Monitor Notebook Computer Temperature Monitor Electronic Thermometers Fish Finder Water Temperature Industrial Process Controllers Home Appliance Temperature Control DESCRIPTION The TK11032 is a temperature sensor IC with a linear output of 6 mV/C over the range of -30 to + 105 C. Its wide operating voltage range of 2.7 to 10.0 V makes it suitable for a number of applications requiring accurate temperature control, such as electronic thermostats for climate control, refrigerators, and industrial process controls. The device is in the "on" state when the control pin is pulled to a logic high level. A typical application is to make a digital representation of temperature with an A/D converter, or to make a thermal detector with a comparator. The TK11032 has a compensation pin for a 0.1 F capacitor that ensures stability over the IC's operating temperature range. The TK11032 is available in a miniature SOT-25 surface mount package. Note: Connect Pin 2 to GND TK11032 VCC GND 01 S HS VOUT VCONT BLOCK DIAGRAM VCC ORDERING INFORMATION VCC VCONT TK11032M Tape/Reel Code ON/OFF CIRCUIT TEMPERATURE DETECTION CIRCUIT + VOUT - TAPE/REEL CODE TL: Tape Left GND HS January 1999 TOKO, Inc. Page 1 TK11032 ABSOLUTE MAXIMUM RATINGS Supply Voltage ......................................................... 12 V Operating Voltage .......................................... 2.7 to 10 V Power Dissipation (Note 1) ................................ 150 mW Junction Temperature ........................................... 150 C Storage Temperature Range ................... -55 to +150 C Operating Temperature Range .................-30 to +105 C Lead Soldering Temperature (10 s) ...................... 235 C TK11032 ELECTRICAL CHARACTERISTICS Test Conditions: VCC = 3.0 V, VCONT = 2.4 V, IOUT = 0 A, TA = 25 C, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS TA = 25 C VOUT Output Voltage TA = 85 C TA = -30 C TC Line Reg Load Reg ICC IOUT ICC(STBY) Temperature Coefficient Line Regulation Load Regulation Supply Current Output Current Standby Supply Current VOUT 20 mV VCONT 0.6 V TA = 25 C to 85 C VCC = 3 to 10 V IOUT = 0 to 400 A 5.61 -12 MIN 1.7712 2.1306 TYP 1.7892 2.1546 1.4610 6.09 3 3 85 6.57 12 20 150 400 1 MAX 1.8072 2.1786 UNITS V V V mV/ C mV mV A A A CONTROL TERMINAL SPECIFICATIONS VCONT(ON) VCONT(OFF) ICONT Control Voltage (ON) Control Voltage (OFF) Control Current VOUT = 1.7712 to 1.8072 V, Output ON VOUT 0.1 V, Output OFF 1.8 GND 4.5 2.4 VCC 0.6 7.5 V V A Note 1: Power dissipation is 150 mW when mounted as recommended. Derate at 1.2 mW/C for operation above 25 C. Page 2 January 1999 TOKO, Inc. TK11032 TEST CIRCUIT VCONT VCC ICONT ICC VCONT VOUT VCC COUT + 10 F GND HS 0.1 F IOUT VOUT VCC = 3 V, VCONT = 2.4 V, IOUT = 0 A, TA = 25 C, unless otherwise specified. OUTPUT VOLTAGE vs. TEMPERATURE 4 3 2 1 LINEARITY ERROR vs. TEMPERATURE TYPICAL PERFORMANCE CHARACTERISTICS INPUT CURRENT vs. TEMPERATURE 100 90 ICC (A) 2 1 0 -40 0 40 TA (C) 80 120 TERR ( C) VOUT (V) 0 -1 -2 -40 0 40 TA (C) 80 120 80 70 60 -40 0 40 TA (C) 80 120 INPUT CURRENT vs. INPUT VOLTAGE 100 90 ICC (A) LINE REGULATION 20 10 0 -10 -20 20 10 0 -10 -20 2 4 6 VCC (V) 8 10 0 LOAD REGULATION 80 70 60 2 4 6 VCC (V) 8 10 VERR (mV) VERR (mV) 100 200 IOUT (A) 300 400 January 1999 TOKO, Inc. Page 3 TK11032 TYPICAL PERFORMANCE CHARACTERISTICS (CONT.) VCC = 3 V, VCONT = 2.4 V, IOUT = 0 A, TA = 25 C, unless otherwise specified. OUTPUT VOLTAGE vs. CONTROL VOLTAGE 4 3 VOUT (V) 2 1 0 0 0.6 1.2 VCONT (V) CONTROL CURRENT vs. CONTROL VOLTAGE 8 6 VOUT (V) 4 ICC (A) INPUT CURRENT vs. CONTROL VOLTAGE 100 75 50 25 0 6 5 4 3 2 0 0.6 1.2 VCONT (V) 1.8 2.4 -40 CONTROL CURRENT vs. TEMPERATURE 1.8 2.4 ICONT (A) 0 40 TA (C) 80 120 CONTROL VOLTAGE RESPONSE A 4 COUT = 0.1 F CONTROL VOLTAGE RESPONSE B COUT = 0 F 3 VOUT (V) 2 1 0 ICONT (A) 3 2 1 0 4 2 0 0 0.6 1.2 VCONT (V) 1.8 2.4 0 1 2 TIME (ms) 3 4 0 1 2 TIME (ms) 3 4 RIPPLE REJECTION RATIO A 80 COUT = 0.1 F 60 RR (dB) RR (dB) RIPPLE REJECTION RATIO B 80 COUT = 0 F 60 40 20 0 Vrr = 100 mVrms VOUT (V) TEMPERATURE RESPONSE A 4 3 2 1 0 25 TO 85 C 40 20 0 10 100 1k f (Hz) 10 k 100 k Vrr = 100 mVrms 10 100 1k f (Hz) 10 k 100 k 0 20 40 TIME (s) 60 80 Page 4 January 1999 TOKO, Inc. TK11032 TYPICAL PERFORMANCE CHARACTERISTICS (CONT.) VCC = 3 V, VCONT = 2.4 V, IOUT = 0 A, TA = 25 C, unless otherwise specified. TEMPERATURE RESPONSE B 4 3 VOUT (V) 2 1 0 0 20 25 TO -30 C 40 TIME (s) 60 80 January 1999 TOKO, Inc. Page 5 TK11032 PACKAGE OUTLINE Marking Information 0.7 SOT-25 (SOT-23-5) TK11032 Marking 1.0 5 4 (0.6) Marking 32C (0.6) 1.6 e 0.95 e' e 0.95 1.90 1 2 3 0.4 +0.15 -0.05 e 0.95 e 0.95 Recommended Mount Pad 0.1 M 2.9 1.4 max 1.1 (0.8) 0.15 - 0.05 0 - 0.1 +0.15 e1 2.4 0.3 0.1 Dimensions are shown in millimeters Tolerance: x.x = 0.2 mm (unless otherwise specified) Toko America, Inc. Headquarters 1250 Feehanville Drive, Mount Prospect, Illinois 60056 Tel: (847) 297-0070 Fax: (847) 699-7864 TOKO AMERICA REGIONAL OFFICES Midwest Regional Office Toko America, Inc. 1250 Feehanville Drive Mount Prospect, IL 60056 Tel: (847) 297-0070 Fax: (847) 699-7864 Western Regional Office Toko America, Inc. 2480 North First Street , Suite 260 San Jose, CA 95131 Tel: (408) 432-8281 Fax: (408) 943-9790 Eastern Regional Office Toko America, Inc. 107 Mill Plain Road Danbury, CT 06811 Tel: (203) 748-6871 Fax: (203) 797-1223 Semiconductor Technical Support Toko Design Center 4755 Forge Road Colorado Springs, CO 80907 Tel: (719) 528-2200 Fax: (719) 528-2375 Visit our Internet site at http://www.tokoam.com The information furnished by TOKO, Inc. is believed to be accurate and reliable. However, TOKO reserves the right to make changes or improvements in the design, specification or manufacture of its products without further notice. TOKO does not assume any liability arising from the application or use of any product or circuit described herein, nor for any infringements of patents or other rights of third parties which may result from the use of its products. No license is granted by implication or otherwise under any patent or patent rights of TOKO, Inc. Page 6 (c) 1999 Toko, Inc. All Rights Reserved IC-232-TK11032 0798O0.0K 0 - 15 2.8 max January 1999 TOKO, Inc. Printed in the USA |
Price & Availability of TK11032
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |